Dwell Neo User manual

Converting to Bed
From sofa or lounge position, lift backrest all the way upwards until the last click is heard which unlocks
the mechanism and carefully return to a flat position.
IMPORTANT: Ensure that the support legs are extended out (behind the backrest) when using it
as a bed.
2011/03
Neo
Converting to Sofa
Standing at the side of the unit (from bed position), lift backrest to the desired position and secure in
place by releasing to the sound of a click.
Converting the Neo
Converting to Lounger
In bed position, lift backrest upwards with each click sound until the desired lounge position is reached.
4-4

3-4
Carefully unpack and place sofa body unit upright on a clean
flat surface to show the base as shown.
Unzip both side compartments on the base and locate the pre-drilled holes inside. Align
armrest into position (see above) and secure with four long bolts and washers for each
armrest from inside with Allen key.
Repeat step for other armrest, ensuring both are fully secured and zip shut when complete.
2
Align and secure all four legs with two short bolts each using the Allen key.
Secure center support leg by screwing into pre-drilled holes on
center of the base by hand and avoid overtightening.
3
Finally, carefully lift and turn assembled unit onto its legs. Two persons required to avoid
personal injury.
4
1
3-42-4
Assembling the Neo
Parts and Hardware
Sofa Body
Center
Support Leg
Armrest
4
Leg
WasherLong Bolt
Allen Key
Short Bolt