Dyconn Cloud M22 Series User manual

Product Features:
Alluminum alloy black frame
Shatter resistant mirror
Can be vertical or horizontal hanging
Touch switch on & off
Touch switch dim function
Touch Anti-fog function
LED Backlit Mirror
Sizes: 24" x 36" , 30" x 36", 36" x 36", 48" x 36", 60" x 36",
72" x 36", & 84” x 32”
Model:
Cloud M22 series
Thoroughly read all instructions before installing the enclosed product.
Read and take note of all safety, care, and maintenance information.

Model: Cloud M22T
Product Features:
Product Description
Package Content:
LED backlit Mirror
Screws
Studs
Mounting bracket
Alluminum alloy black frame
Shatter resistant mirror
Can be vertical or horizontal hanging
Touch switch on & off
Touch switch dim function
Touch Anti-fog function
HD Mirror glasses, with water repllent coating
2 lighting s ources - LED lighting (3000K,
4000K or 6400K) all around frame on the
surface of the mirror, and the all LED backlit
* Only one mounting bracket is available , choose either vertical or horizontal mounting.
* All diagrams are for reference only. All model dimensions and proportions will vary.
Warning: Always switch off the electrical supply at the mains during installation
and maintenance.
Do not switch on the electrical supply at the mains until the end of the installation.
15.75'' (400mm)
15.75'' (400mm)
36.0'' (915mm)
48.0'' (1219mm)
36.0'' (915mm)
1.97''
(50mm) 1.77''
(45 mm)
R33 [R1.3'']
Touch switch
(Anit-fog, Dim,
LED Temp)
Black Metal
Frame
5 mm silver mirror
Synchno Switch
Vertical /Horizontal
mounting
trench
Vertical /Horizontal
mounting bracket
LED strip for
Front LED mirror
110V-LED Driver110V Defogger pad
Frosted
Mirror
LED strip for
Back all around

2
Installation
WALL
Vertical /Horizontal
mounting bracket
Vertical /Horizontal
mounting trench
is on the 4 sides of
the back frame
Neutral
Black
Green
Vertical /Horizontal
mounting trench
Step 1:
Step 3:
Step 2:
Method 1
Method 2
Step 1:
Decide the desired hanging location.
Using a I-Beam level to mount the included mounting bracket
with 3 screws (using anchor when its installing on drywall, concrete or Tile surface).
Step 2:
Make sure the circuit breaker for the power source of the mirror is o.
Method 1: Plug in the power cord to wall outlet.
or
Method 2: Cut the plug (this step cannot be reversed), connect the neutral (White),
hot (black) and ground (copper wire or Green) wire between the mirror and the
junction box in the wall.
Step 3:
With both hands, hang the mirror with desired placement (vertical or Horizontal)
by placing the mirror’s cut out on to the mounting bracket.
Anti-Fog
Function
Press once to
activate
Frontlit
Brightness
Press increase
the brightness
Backlit
Brightness
Press increase
the brightness

4