Dyconn Edison M13 Series User manual

Product Features:
Alluminum alloy black frame
Tempered Glass mirror
Vertical or horizontal hanging
Touch switch on & off
Touch switch dim function &
Lighting temperature selections
LED Backlit Mirror
Sizes: 24" x 34" , 30" x 36", 48" x 36", 60" x 35", 72" x 38"
& 88” x 38”
Model: Edison M13 series & Egret M16 series
Thoroughly read all instructions before installing the enclosed product.
Read and take note of all safety, care, and maintenance information.

Product Features:
Product Description
Package Content:
LED backlit Mirror
Screws
Studs
Mounting bracket
Alluminum alloy black frame
Shatter resistant mirror
Can be vertical or horizontal hanging
Touch switch on & off, Backlit LED on & off
Touch switch dim function
HD Mirror glasses, with water repllent coating
LED lighting with 3 Temperature selections
(3000K, 4000K or 6400K)
Warning: Always switch off the electrical supply at the mains during installation
and maintenance.
Do not switch on the electrical supply at the mains until the end of the installation.
Phillips Screwdriver Electronic Driller I-Beam level
Touch switch
on & o
Front view
Front LED button Backlit LED button
5 mm silver
mirror
0.8” Frosted
Mirror
0.8” Silver
mirror edge
Color
Temperature
Function
Press to choose
3 settings
LED Dim
Function
Press + Hold
to increase
brightness
Color
Temperature
Function
Press to choose
3 settings
LED Dim
Function
Press + Hold
to increase
brightness

LED strip for
Back all around
Installation - Horizontal Mounting
LED strip
Horizontal Mounting*
1. Using a I-Beam level to
level and mark the desire
position on the wall. Drill
the hole and secured
with the wall stud. (using
anchor when its installing
on drywall, concrete or Tile
surface). Secured the
mounting bracket on the
wall.
Horizontal Mount
Horizontal Mounting
Trench
Vertical
Mounting
Trench
Anti-fog
pad
Circuit
Board
Power
Cord
This part is not visible.
mounting bracket
Mounting bracket (B)
Wall
IMPORTANT:
First, decide whether you want to hang your mirror vertically or
horizontally. It is advisable to have one more person help you
install mirror larger than 48”.
Wall
Back view
Powder Coated
White Metal
Back Frame

3
* Only one mounting bracket is available , choose either vertical or horizontal mounting.
* All diagrams are for reference only. All model dimensions and proportions will vary.
2. Make sure the circuit
breaker for the power source
of the mirror is off. Use either
way to connect electricity.
Connect the neutral (White),
hot (black), and ground
(copper wire orGreen) wire
between the mirror and the
junction box.
3. With both hands holding
the mirror, interlock the
built in mounting bracket
with the mounting bracket
accordingly on the wall.
4. Test the mirror.
Mounting
Trench
Mounting
bracket (B)
Wall
Mirror
Wall
neutral(White)
neutral(White)
hot (black)
hot (black) ground
(copper wire/
Green)
ground
(copper wire/
Green)

4
Installation - Vertical Mounting
Vertical Mounting*
1. Remove the horizontal
mounts on the back of the
frame. Line up the holes on
the bracket with the holes
placed for the vertical
mount and screw the
bracket in.
2. Follow instructions as
Horizontal Mounting* .
IMPORTANT:
First, decide whether you want to hang your mirror vertically or
horizontally. It is advisable to have one more person help you
install mirror larger than 48”.
Mounting
Bracket
Mounting
Trench
3. With both hands holding
the mirror, interlock the
built in mounting bracket
with the mounting bracket
accordingly on the wall.
4. Test the mirror.
Mounting
Trench
Mounting
bracket (B)
Wall
Mirror

5
Manufacturer Limited Warranty