Dyer D+H RCR 11-2 User manual

RCR 11-2 / RCR 11-4 instructions
Intended use
Technical Data
1x Radio remote control
1x Wall fastening for radio remote control
Scope of supply
RCR 11-2
RCR 11-4
- Remote control for controlling of D+H radio
drives and radio modules
- For VENTIC-Solar, GVL 8401-K-RC and
BDT 010-RC
- With 2 or 4 control levels
- Radio frequency 868 MHz – approved in the
entire EU (except for Bulgaria)
- 128 Bit AES coding
- High reliability against external operation –
32 Bit address codification and alternating
code with every keystroke (Code-Hopping)
- Multiple drives controllable with
one remote control
Radio frequency :868,3 MHz / FSK
Encryption :AES / 128 Bit
Radio standard :ETSI EN 300220-1:2010
:ETSI EN 301489-1:2011
:ETSI EN 301489-3:2002
Transm. power :app. 10 mW (e.r.p.)
Transm. range :up to app. 100 m (free field)
Material :ABS, POM
Battery type :2x lithium CR 2032

Solis
GVL 8401-K-RC
BDT 010-RC
Pairing remote control
>
5
Sec.
>
2
Sec.
1x
Exit
5
Sec.
5
Sec.
5
Sec.
5
Sec.
Level 1
Level 2
5
Sec.
5
Sec.
Level 3
Start
RCR 11
RCR 11
RCR 11
Operation
1
2
1
2
STOP
1
2
Battery replacement
Li
CR 2032
3V
CR 2032
3V
Wall fastening
15mm
110mm
45mm
60mm
67mm 80mm
19mm
Every operation of a button will be acknowledged by a
flashing of the transmitting LED. If not, replace the battery.
SET/S1
Solis
GVL 8401-K-RC
BDT 010-RC
SET
Solis
GVL 8401-K
BDT 010-RC
Dyer Environmental Controls Ltd
Unit 10 Lawnhurst Trading Estate, Cheadle Heath,
Stockport SK3 0SD
Tel: [phone]
E-Mail: [email protected]
www.dyerenvironmental.co.uk