Dymo LabelManager 450D User manual

2
Contents
About Your New Label Maker .................................................................................................................................5
Warranty Registration........................................................................................................................................................................5
Getting Started.....................................................................................................................................................5
Connecting the Power........................................................................................................................................................................5
Connecting the Power Adapter......................................................................................................................................................5
Inserting the Batteries...................................................................................................................................................................5
Inserting the Tape Cassette................................................................................................................................................................5
Settings................................................................................................................................................................6
Selecting a Language.........................................................................................................................................................................6
Setting the Current Date ....................................................................................................................................................................6
Setting the Current Time....................................................................................................................................................................7
Selecting Units of Measure.................................................................................................................................................................7
Printing Your First Label.....................................................................................................................................................................7
Getting to Know the Label Maker...........................................................................................................................7
Power ................................................................................................................................................................................................7
LCD Display.........................................................................................................................................................................................7
CAPS Mode.........................................................................................................................................................................................8
Shift Key .............................................................................................................................................................................................8
Space Bar............................................................................................................................................................................................8
Backspace...........................................................................................................................................................................................8
Cancel ................................................................................................................................................................................................8
Navigation Keys .................................................................................................................................................................................8
Connecting to Your Computer ................................................................................................................................8
Formatting Your Label .......................................................................................................................................................................8
Changing the Font .............................................................................................................................................................................8
Adding Font Styles .............................................................................................................................................................................9
Adding Box and Background Styles....................................................................................................................................................9
Creating Multi-Line Labels...............................................................................................................................................................10
Using Mixed Formats........................................................................................................................................................................10
Using Tabs ........................................................................................................................................................................................10
Using Symbols and Special Characters.................................................................................................................. 10
Adding International Characters......................................................................................................................................................10
Currency Symbols............................................................................................................................................................................. 11
Adding Date and Time ......................................................................................................................................... 12
Changing the Date Format ...............................................................................................................................................................12
Adding the Date to Your Label.......................................................................................................................................................... 12
Changing the Time Format...............................................................................................................................................................12
Adding the Time to your Label.........................................................................................................................................................12
LM450D_manual_UK_WEU.indd 2 16-08-2007 09:22:53

3
Printing Options ................................................................................................................................................. 12
Printing Multiple Copies................................................................................................................................................................... 12
Serializing Your Labels .....................................................................................................................................................................13
Printing a Fixed-Length Label.......................................................................................................................................................... 13
Adding Barcodes to Labels ..............................................................................................................................................................13
Previewing Your Label......................................................................................................................................................................14
Aligning the Text..............................................................................................................................................................................14
Changing the Cutting Option ...........................................................................................................................................................14
Adjusting the Print Contrast.............................................................................................................................................................14
Using Label Maker Memory.................................................................................................................................. 14
Storing Label Text ............................................................................................................................................................................ 14
Storing Formats................................................................................................................................................................................15
Recalling Stored Labels and Formats ...............................................................................................................................................15
Caring for Your Label Maker................................................................................................................................. 15
Troubleshooting ................................................................................................................................................. 16
DYMO D1 Tape Cassettes ...................................................................................................................................... 17
Power Adapter.................................................................................................................................................... 17
Documentation Feedback.................................................................................................................................... 18
Environmental Information ................................................................................................................................ 18
LM450D_manual_UK_WEU.indd 3 16-08-2007 09:22:53

4
1,2...n
Enter
P
O
L
K
I
U
J
HG
B
V
F
T
C
D
R
E
S
X
0
987
65
4
3
2
1?
w
w
w
.
d
y
m
o
.
c
o
m
!
N
Clear
Cancel
CAPS
SPAC E
&
–+
,=
/,
Y
Shift Shift
Language
Settings
Memory
Insert
Preview Symbols
1Auto cutter 10 Clear/Delete 19 Power
2Tape exit 11 Shift 20 AC power connector
3LCD display 12 Space bar 21 USB connector
4Cutter 13 Memory 22 Font Size/Style
5Print 14 Preview insert 23 Font/Fixed Length
6Cancel 15 CAPS 24 Underline-Box/Align
7Navigation 16 Tab 25 Symbols
8Return/Enter 17 Language
9Currency 18 Settings
1
2
3
4
5
6
7
9
1112131415
17
18
19
22 23 24 25
Figure 1 LabelManager 450D Professional Label Maker
8
10
11
16
20 21
LM450D_manual_UK_WEU.indd 4 16-08-2007 09:22:54

5
About Your New Label Maker
With your new DYMO LabelManager™ 450D label maker, you
can create a wide variety of high-quality, self-adhesive labels.
You can choose to print your labels in many different font sizes
and styles. The label maker uses DYMO D1 tape cassettes in
widths of 6 mm, 9 mm, 12 mm, 19 mm, or 24 mm. These tape
cassettes are available in a wide range of materials.
Visit www.dymo.com for information on obtaining labels
and accessories for your label maker.
Warranty Registration
Visit www.dymo.com/registration to register your label
maker online.
Getting Started
Follow the instructions in this section to print your first label.
Connecting the Power
The label maker can operate on AC or battery power. To save
power, the label maker will automatically turn off after two
minutes of inactivity.
Connecting the Power Adapter
An optional 9 Volt, 1.5 A power adapter can also be used to
power the label maker. Connecting the AC adapter to the label
maker disconnects the batteries as a power source.
To connect the power adapter
Plug the power adapter into the power connector on the1.
top, left side of the label maker.
Plug the other end of the power adapter into a power2.
outlet.
xMake sure the label maker power is turned o before you
disconnect the power adapter from the main power source.
Otherwise, your most recent memory settings will be lost.
Inserting the Batteries
The label maker uses six 1.5 volt high-capacity AA alkaline
batteries.
To insert the batteries
Remove the battery compartment cover. See Figure 2.1.
Figure 2
Insert the batteries following the polarity markings2.
(+ and –).
Replace the battery compartment cover.3.
xRemove the batteries if the label maker will not be used
for a long period of time.
Inserting the Tape Cassette
Your label maker comes with one DYMO D1 tape cassette.
Visit www.dymo.com for information about purchasing
additional tape cassettes.
To insert the tape cassette
Press and release the tape cassette cover to open the tape1.
compartment. See Figure 3.
Figure 3
LM450D_manual_UK_WEU.indd 5 16-08-2007 09:22:55

6
xThe first time you use the label maker, remove the
protective cardboard insert from between the print head
and pinch roller. See Figure 4.
Figure 4
Insert the cassette with the tape and ribbon positioned2.
between the guideposts. See Figure 5.
Figure 5
Press firmly until cassette clicks into place.3.
Click !!
Figure 6
Close the tape cassette cover and press4. Ato turn on the
power.
The Tape Settings menu automatically appears
immediately after inserting a new tape cassette.
Use the arrow keys to select the tape width of the tape5.
cassette currently in the label maker and press H.
Settings
You can set the language, current date and time, and the units
of measure you want the label maker to use.
Selecting a Language
You can select from a number of different language options.
By default, the language is set to English.
To select a language
Press1.
Language
.
Use the arrow keys to select the language and press2. H.
Setting the Current Date
The default date format depends upon the language selection
for the label maker. You can change the default date format
by following the instructions in Changing the Date Format
on page 12.
To set the date
Press1.
Settings
.
Select2. Set Date, and press H.
The default date is displayed.
Move the cursor over each setting (month, day, and year)3.
and use the arrow keys to increase or decrease the value.
When finished, press4. H.
Remove
cardboard
insert
LM450D_manual_UK_WEU.indd 6 16-08-2007 09:22:57

7
Getting to Know the Label Maker
The following sections describe each feature in detail. Become
familiar with the location of the feature and function keys on
your label maker. See Figure 1.
Power
The Abutton turns the power on and off. After two minutes
of no activity, the power is switched off automatically.
The last label created is remembered and displayed when
the power is turned back on. The previously selected style
settings are also restored.
LCD Display
The label maker’s LCD display shows a row of up to 16
characters. However, you can enter up to 99 characters and
spaces.
The display window can accommodate 16 upper-case
characters. As you type more characters, they begin to scroll
to the left. The number of characters actually displayed can
vary due to proportional spacing.
In addition, feature indicators appear on the display to let you
know when a feature is selected. See Figure 7.
Figure 7
Setting the Current Time
The default time format depends upon the language selection
for the label maker. You can change the default time format
by following the instructions in Changing the Time Format
on page 12.
To set the time
Press1.
Settings
.
Select2. Set Time, and press H.
The default time is displayed.
Move the cursor over each setting (hours and minutes) and3.
use the arrow keys to increase or decrease the value.
When finished, press4. H.
Selecting Units of Measure
You can choose to show measurements in inches or
millimeters. The default units of measure depends upon the
language chosen.
To set the units of measure
Press1.
Settings
.
Use the arrow keys to select2. Set Units and press H.
Select inches or millimeters and press3. H.
Printing Your First Label
You are now ready to print your first label.
To print a label
Enter text to create a simple label.1.
Press2.
1,2...n
. The label is automatically cut.
The Auto Cut feature is turned on by default. To disable the
Auto Cut feature, see Changing the Cutting Option on
page 14.
Remove the label.3.
Congratulations! You have printed your first label. Continue
reading to learn more about the options available for creating
labels.
BIG
CAPS mode
Multiple Lines
Fixed Length
Align/Justify
Underline/Box
Mixed Formats
# of Copies
Auto Cut
Font and Size Style Scroll
LM450D_manual_UK_WEU.indd 7 16-08-2007 09:22:58

8
CAPS Mode
The
CAPS
key toggles capitalization on and off. When CAPS
mode is turned on, the CAPS mode indicator is shown on the
display and all letters that you enter will be capitalized. The
default setting is CAPS mode on. When CAPS mode is off, all
letters entered appear in lower case.
Shift Key
The
Shift
key, when used in combination with an alphabet
key, changes the case of the selected letter. When used in
combination with number keys or function keys, the
Shift
key
selects the alternate function shown on the key. For example,
when you press
Clear
, the character to the left of the cursor is
deleted; however, when you press
Shift
+
Clear
together, the
entire label text and formatting is deleted and the display is
ready for you to type a new label.
Space Bar
The Space bar inserts one or more blank spaces in your text.
Backspace
The
Clear
key removes the character to the left of the cursor.
Shift
+
Clear
clears all label text and formatting.
Cancel
The
Cancel
key allows you to exit from a menu without making a
selection or to cancel an action.
Navigation Keys
With the keys, you can review and edit your label, and
navigate through the menus. Use the left and right arrow keys
to move the cursor along the label text or to move through
fields. Use the up and down arrow keys to increase or decrease
settings and to select menu items, and then press Hto
accept the selection.
Connecting to Your Computer
Your label maker can be used as a standalone label printer or
you can print labels from your computer using DYMO Label
Software. Your label maker connects to your computer using
the USB connection located on the top of the label maker. See
Figure 8.
Figure 8
Refer to the LabelManager 450D Quick Start Card for installation
instructions and the DYMO Label Software User Guide for
information about designing and printing labels.
Formatting Your Label
You can choose from a number of formatting options to
enhance the appearance of your labels.
xThe label maker remembers the last feature selection
made so that each time you enter one of the feature menus
described in this section, you are positioned at the last item
selected from that menu.
Changing the Font
Seven fonts are available for your labels:
Arial Narrow
Arial Normal
Arial Wide BIG
Times New Roman
When you specify a font, that font applies to all characters
on the label. If you want to use more than one font, you must
insert format breaks. See Using Mixed Formats on page 10
for more information.
LM450D_manual_UK_WEU.indd 8 16-08-2007 09:23:01

9
To set the font
Press the1. key.
Use the arrow keys to move to the desired font and then2.
press H.
Adding Font Styles
You can choose from many different font styles to apply to
your text:
When you select a style, that style applies to all characters on
a label. If you want to use more than one style, you must insert
format breaks. See Using Symbols and Special Characters
on page 11 for more information on printing symbols.
To set the font style
Press the1. key.
Use the arrow keys to move to the desired style and then2.
press H.
Adding Box and Background Styles
You can further highlight your text by choosing a box,
underline, or background style. You can also use label text
stored in memory as background text on your label. See
Storing Label Text on page 14 for information on storing
text in memory.
A label can be underlined or enclosed in a box or background,
but not both together. The styles available are shown in
Figure 9.
≥Underline
›Square Box
¢Pointed Box
√Rounded Box
¿Crocodile Box
Scroll Box
3D Box
Dots
Wood Grain
Bricks
Checkers
Parquet
Diamonds
Weave
DYMO
LabelManager 450D
Text Background
Figure 9
xBackground patterns are not available for 6 mm labels.
Normal
Bold
Italic
Outline
Shadow
3D
Strikethrough
Vertical
Mirror
Italic + Bold
Italic + Outline
Italic + Shadow
Italic + 3D
LM450D_manual_UK_WEU.indd 9 16-08-2007 09:23:04

10
Alignment, underline, box styles, and background patterns
cannot be mixed on a label. These styles are common to the
entire label.
To add a format break
Enter and format text for the first section.1.
Press2.
Insert
Preview
.
Select3. Insert Format Break and press H.
Continue entering and formatting text for the next section of
the label.
Using Tabs
You can add tabs to a label to align text on multi-line labels.
Tabs are left justified and the default spacing is 50 mm.
To change the tab spacing
Press1.
Settings
.
Select2. Set Tab Length and press H.
Use the up and down arrow keys to increase or decrease the3.
tab setting, and then press H.
To insert a tab
Enter your text.1.
Press the2.
æ
key and continue entering text.
Using Symbols and Special
Characters
Symbols and other special characters can be added to labels.
Adding International Characters
The label maker supports the extended Latin characer set
using RACE technology. Similar to using a mobile phone
keypad, if you type a letter multiple times within a very short
time, you will scroll through variations on that letter.
For example, if French is selected as the language and you
repeatly press the letter a, you will see a à á â ã ä å and so on
through all the variations available. The character variations
and the order in which the variations appear depend on the
language you have selected to use.
To set the box style
Press the1. key.
Select a frame style and then press2. H.
On multi-line labels, all lines are underlined. In box style
mode, all lines are enclosed in one box style.
To select a text background
Press the1. key.
Select2. Text Background and then press H.
The first memory location is displayed.
Use the arrow keys to select the stored text you wish to use3.
as a background and press H. Refer to Storing Label
Text on page 14.
Creating Multi-Line Labels
The number of lines you can print on a label depends on the
width of the label you are using:
Maximum of five lines on 19 mm and 24 mm labels•
Maximum of three lines on 9 mm and 12 mm labels•
Maximum of one line on 6 mm labels•
To create a multi-line label
Type the text for the first line, and press1. Enter.
A new line character is placed at the end of the first line
in the display, but will not print on the label.
Type the text for the second line.2.
The display shows the line on which you are currently
entering text. The example below indicates that the second
line is the current line on the label.
Use the arrow keys to move between lines.3.
Using Mixed Formats
You can apply different fonts and format styles to the text on a
label by inserting format breaks to divide the label into blocks
or sections of text. Each section is separated by a format break.
You can add two format breaks, allowing you to apply three
separate formats to a label.
LM450D_manual_UK_WEU.indd 10 16-08-2007 09:23:06

11
Currency Symbols
The currency key also uses RACE to scroll through a number of
currency symbols:
€ £ $ ¢ ¥
The order these symbols appear depends on the language you
have selected.
Adding Symbols
The label maker supports the extended symbol set as shown
in Figure 10.
To add a symbol
Press1.
Symbols
. The first row of symbols shown in the table
appears in the display.
Use the arrow keys to move to the desired symbol.2.
The left and right arrows move horizontally along a row
of symbols. The up and down arrow keys scroll vertically
through the rows of symbols.
To quickly see a row of symbols, you can press the letter
corresponding to the row you want.
When you locate the desired symbol, press3. Hto add the
symbol to your label text.
Figure 10
LM450D_manual_UK_WEU.indd 11 16-08-2007 09:23:07

12
Adding Date and Time
You can add the date and time to your labels.
Changing the Date Format
You can choose from 12 different date formats:
24/12/2004 12/24/2004
24/12/04 12/24/04
24 Dec 2004 Dec 24, 2004 (US default)
24 Dec 04 (EU default) Dec 24, 04
24 December 2004 December 24, 2004
24 December 04 December 24, 04
To change the date format
Press1.
Settings
, select Set Date, and press H.
Use the arrow keys to select the date format and press2. H.
The display shows the currently set date.
Use the arrow keys to change each part of the date (month,3.
day, year) and press Hafter each part.
Adding the Date to Your Label
The date can be added as fixed text (the date remains the
same) or as variable text that is automatically updated with
the current date when the label is actually printed.
To add the date
Press1.
Insert
Preview
.
Select2. Insert Date and press H.
Select3. FIXED DATE or AUTOM. UPDATED and press H.
When Autom. Updated is selected, a date icon is inserted
on your label. When Fixed Date is selected, the actual date is
inserted on your label in the format specified.
Changing the Time Format
You can choose to show the time in 12-hour format or 24-hour
format.
To set the time format
Press1.
Settings
, select Set Time, and press H.
Use the arrow keys to select the time format (24 Hour Clock2.
or 12 Hour Clock) and press H.
The display shows the default time.
Use the arrow keys to change each part of the time (hours3.
and minutes) and press Hafter each part.
Adding the Time to your Label
The time can be added as fixed text (the current time) or as
variable text that is automatically updated with the current
time when the label is actually printed.
To add the time
Press1.
Insert
Preview
.
Select2. Insert Time and press H.
Select3. Fixed Time or Autom. Updated and press H.
When Autom. Updated is selected, a time icon is inserted
on your label. When Fixed Time is selected, the actual time is
inserted on your label in the format specified.
Printing Options
You can print multiple copies of a label at one time, print
serialized labels, add a barcode, print fixed-length labels,
review label text and format, and adjust the printing contrast.
Printing Multiple Copies
You can print up to 16 copies of a label at one time. When
printing multiple copies, a dotted cut-line is printed between
each label.
LM450D_manual_UK_WEU.indd 12 16-08-2007 09:23:07

13
To print multiple copies of the label
Press1.
Settings
.
Select2. Set # Copies and press H.
Press the up arrow key to increase the number of copies3.
to print.
Press the down arrow key to begin decreasing the number4.
of copies from 16.
Press5. H.
Press6.
1,2...n
to begin printing.
xYou may notice a brief pause in printing between each
label for more complex formats.
When printing is finished, the number of copies to print
returns to the default value of 1.
Serializing Your Labels
You can print a series of labels with the last number
incremented by one number. The number of labels serialized
depends upon the number of copies you selected to print. Only
the last series of numbers that follows any letter, space, or
punctuation will be serialized. For example, abc123 will print
as abc123, abc124, abc125; and 123-998 will print as 123-998,
123-999, 123-1000, and so on.
To serialize your labels
Enter the text for your label.1.
Press2.
Settings
and then select Set # Copies.
Press the up arrow key to increase the number of3.
increments to print and press .
Press4.
Shift
+
1,2...n
.
The labels automatically print, each label incremented by one
number.
Printing a Fixed-Length Label
Normally, the length of the label is determined by the length
of the text entered. However, you may wish to make a label
for a specific purpose that is a fixed length regardless of the
length of the text.
You can specify a fixed length for a label in 2 mm increments
between 40 mm and 400 mm. The preset fixed length is
100 mm. Any change you make to the fixed-length setting
remains in effect until you change it.
To set the label length
Press1.
Shift
+ .
Press the up arrow to select2. Fixed Length On and then
pressH.
Use the arrow keys to set the length.3.
Press4. H.
After you print the label, you must reset the fixed-length label
setting to OFF; otherwise, all your subsequent labels will print
with this fixed length.
Adding Barcodes to Labels
The label maker can print barcodes in six standard formats:
UPCA, UPCE, EAN8, EAN13, CODE39, and CODE128.
You can print a barcode on 19 mm and 24 mm label tape; and
you can print only one barcode per label.
The barcode prints horizontally along the label with the text
in small print underneath the barcode. You can optionally
add text before and after the barcode. Or, you can add text
above or below the barcode by creating a two-line label. See
Creating Multi-Line Labels on page 10.
Four of the standard barcodes require a fixed number of
characters to generate the barcode: EAN8, EAN13, UPCA, and
UPCE. CODE39 and CODE128 barcodes allow a variable number
of characters to be entered.
To set the barcode type
Press1.
Settings
.
Select2. Set Barcode and press H.
Use the arrow keys to select the barcode type and press3. H.
One or more question marks appear between the barcode
symbols ( ).
You may see a 0 in the far right position for some barcode
types. This is a check digit and will be replaced with a
number when the barcode data is entered.
Enter the data for the barcode, replacing the question4.
marks, and press Hwhen finished.
LM450D_manual_UK_WEU.indd 13 16-08-2007 09:23:08

14
To change the cutting option
Press1.
Settings
.
Select2. Set Auto Cut and press H.
Select3. On or Off, and then press H.
This setting will remain until you change it.
Adjusting the Print Contrast
You can adjust the print contrast to fine tune the print quality
of your label.
To set the contrast
Press1.
Settings
.
Select2. Set Contrast and press H.
Select a contrast setting and press3. H.
Using Label Maker Memory
The label maker has a powerful memory feature that stores
text and formatting as follows:
Automatically stores the last fifteen labels printed.•
Allows you to store the text of up to ten labels you use•
frequently.
Allows you to name and store up to ten commonly used•
label formats.
Storing Label Text
The label maker automatically keeps the last fifteen labels
printed in a text buffer. In addition, you can store up to ten
specific labels you use frequently.
To store the current label text
Press1.
Memory
.
Select2. Save and then press H.
Use the arrow keys to select3. Label and then press H. Ten
fields, which represent memory locations, are displayed.
Fields that are filled indicate stored label text. You can
store new text in any of the memory locations. However,
if you select a location that is filled, the previous label text
will be overwritten.
Select a memory location and press4. H.
Your label text is saved and you are returned to the label.
Once you select a barcode type, that setting remains until you
select a different barcode type.
To insert a barcode
Enter the text you wish to appear before the barcode on the1.
label. (Optional)
Press2.
Insert
Preview
.
Select3. Insert Barcode and press H.
Enter any text you wish to appear after the barcode.4.
(Optional)
Press5.
1,2...n
.
Previewing Your Label
You can preview the text or format of your label prior to
printing. A two-line label is previewed as a single-line label.
To preview your label
Press1.
Shift
+
Insert
Preview
.
Select2. Text or Format, and then press H.
If you select Text, the text of the label scrolls across the display.
If you select Format, the format selected displays briefly.
Aligning the Text
When you print a fixed length label you can choose to align
the text at the left, center, or right side of the label. For multi-
line labels, all lines of text are aligned left, center, and right
relative to each other.
To align the text
Press1.
Shift
+ .
Select the desired alignment and press2. H.
The alignment setting remains active until you reset the
alignment.
Changing the Cutting Option
You can choose to have each label automatically cut after
printing or you can manually cut the labels using the key.
By default, labels are cut automatically. When manual cutting
is selected and you print multiple copies or serialized labels, a
dotted cut-line is printed between each label.
LM450D_manual_UK_WEU.indd 14 16-08-2007 09:23:09

15
Storing Formats
In addition to label text, you can store up to ten specific
label formats you use frequently. This feature stores only the
formatting information not the label text.
Ten fields, which represent memory locations, are displayed.
You can store new formats in any of the fields, however, if you
select a location that is filled, the previous label format will be
overwritten.
To store the current format
Press1.
Memory
.
Select2. Save and press H.
Select3. Format and press H.
Select a field and press4. H. The word Name? appears in
the field.
Enter a name for the format and press5. H. Your label
format is saved and you are returned to the label.
Recalling Stored Labels and Formats
You can easily recall labels and formats stored in memory to
use at a later time.
To recall labels or formats
Press1.
Memory
.
Select2. Recall and then Label, Format, or Last Printed.
A list of memory locations is displayed similar to storing a
label or format.
Select a label or format to recall and press3. H.
Caring for Your Label Maker
Your label maker is designed to give you long and trouble-free
service, while requiring very little maintenance.
Clean your label maker from time to time to keep it working
properly. Clean the cutter blade each time you replace the tape
cassette.
To clean the cutter blade
Press1. Ato turn off the power.
Open tape cassette compartment and remove cassette.2.
Press3. and Atogether. The message, Cut Test,
appears on the display.
Press the4. +
Shift
keys together, then press the
repeatedly, while holding the
Shift
down. The cutter blade
will move into view in small steps.
When you are able to access both sides of the blade, release5.
the keys.
Use a cotton ball and alcohol to clean both sides of the6.
cutter blade.
èThe cutter blade is extremely sharp. Use caution when
cleaning.
After cleaning the blade, press7. to return the blade to its
home position.
You can also follow this procedure if the cutter blade becomes
lodged in the forward position and will not move.
To clean the print head
Remove the tape cassette.1.
Remove the cleaning tool from inside the label2.
compartment cover.
Gently wipe the padded side of the tool across the print3.
head. See Figure 11.
Figure 11
LM450D_manual_UK_WEU.indd 15 16-08-2007 09:23:10

16
Troubleshooting
Review the following possible solutions if you encounter a problem while using your label maker.
Problem/Error Message Solution
No display Ensure the label maker is turned on.•
Replace discharged batteries.•
Poor Print Quality Replace batteries or attach power adapter.•
Set Contrast to higher level.•
See Adjusting the Print Contrast.
Ensure tape cassette is installed properly.•
Clean the print head.•
Replace the tape cassette.•
Poor Cutter Performance Clean the cutter blade.
See Caring for Your Label Maker.
Printing . . . No action required. Message disappears when printing is finished.
Too many characters
Exceeded maximum number of characters
Delete some or all of the buffer text.
Too many lines
Exceed maximum number of lines
Delete a line to fit on the tape width.•
Insert a wider tape cassette.•
Insert Tape Cassette
Tape cassette missing or empty.
Insert a new tape cassette
Battery low
Batteries almost discharged
Replace batteries or connect AC power adapter.
Tape Jam
Motor is stalled due to label jam
Remove jammed label; replace tape cassette.•
Clean cutter blade.•
Too many pages
Exceeded maximum number of format breaks allowed
Change label layout
Page not empty Delete all content on the page.
Tape size too small Change label size or change the formatting on the label.
Set
Fixed-length label selected and the length necessary to print
the label exceeds the selected length.
Following this message, a fixed-length value is displayed which indicates•
the minimum label length necessary to fit the text. Do one of the following:
Adjust the fixed-length label setting appropriately, or•
Select a narrower font size.•
If you still need assistance, contact DYMO Customer Support. See Contacting Customer Support at the back of this User Guide to
locate the contact number for your country.
LM450D_manual_UK_WEU.indd 16 16-08-2007 09:23:10

17
DYMO D1 Tape Cassettes
Width:
Length:
6 mm
7 m
9 mm
7 m
12 mm
7 m
19 mm
7 m
24 mm
7 m
Black/Clear
S0720770
43610
S0720670
40910
S072 0500
45010
S0720820
45800
S0720920
53710
Blue/Clear ___ ___ S0720510
45011
___ ___
Red/Clear ___ ___ S0720520
45012
___ ___
Black/White
S0720780
43613
S0720680
40913
S0720530
45013 S0720830
45803
S0720930
53713
Blue/White ___ S0720690
40914
S0720540
45014
S0720840
45804
S0720940
53714
Red/White ___ S0720700
40915
S0720550
45015
S0720850
45805
S0720950
53715
Black/Blue ___ S0720710
40916
S0720560
45016
S0720860
45806
S0720960
53716
Black/Red ___ S0720720
40917
S0720570
45017
S0720870
45807
S0720970
53717
Black/Yellow
S0720790
43618
S0720730
40918
S0720580
45018
S0720880
45808
S0720980
53718
Black/Green ___ S0720740
40919
S0720590
45019
S0720890
45809
S0720990
53719
White/Clear ___ ___ S0720600
45020
S0720900
45810
S0721000
53720
White/Black ___ ___ S0720610
45021
S0720910
45811
S0721010
53721
Width:
Length:
6 mm
3,5 m
9 mm
3,5 m
12 mm
3,5 m
19 mm
3,5 m
24 mm
3,5 m
Flexible Nylon ___ ___ S0718040
16957
S0718050
16958 ___
Width:
Length:
6 mm
5,5 m
9 mm
5,5 m
12 mm
5,5 m
19 mm
5,5 m
24 mm
5,5 m
Permanent Polyester ___ ___ S0718060
16959
S0718070
16960 ___
Power Adapter
UK Adapter S0721430/40075 European Adapter S0721440/40076
LM450D_manual_UK_WEU.indd 17 16-08-2007 09:23:10

18
Documentation Feedback
We are constantly working to produce the highest quality documentation for our products. We welcome your feedback.
Send us your comments or suggestions about our user guides. Please include the following information with your feedback:
Product name, version number, and page number•
Brief description of content (instructions that are inaccurate or unclear, areas where more detail is needed, and so on)•
We also welcome your suggestions about additional topics you would like to see covered in the documentation.
Send email messages to: [e-mail]
Please keep in mind that this email address is only for documentation feedback. If you have a technical question, please contact
Customer Support.
Environmental Information
The equipment that you have bought requires the extraction and use of natural resources for its production. It may contain
substances that are hazardous to health and the environment.
In order to avoid the dissemination of those substances in our environment, and to diminish the pressure on natural resources, we
encourage you to use the appropriate take-back systems. These systems will reuse or recycle most of the materials of your end-of-
life equipment in an environmentally sound way.
The crossed-bin symbol marked on your device indicates you should use these systems.
If you need more information on the collection, reuse, and recycling of this product, please contact your local or regional waste
administration.
You can also contact us for more information on the environmental performance of our products.
This product is CE marked in accordance with the EMC directive and the low voltage directive and is designed to conform with the following international standards:
US FCC Class B Compatibility
Safety - UL, CUL, TUV, CE, T-Mark, SAA, BABT, C-Tick
EMC - EMI Compatibility
EN 55022; EN 61000 (+ addendums)
RoHS 2002/95/EC
LM450D_manual_UK_WEU.indd 18 16-08-2007 09:23:11