2
Installing the Software
This section describes how to install the CardScan Image Capture software.
Depending on your system, you may be asked to restart your computer at
the end of the installation.
NOTE To install the CardScan Image Capture software, you must
be logged in as Administrator.
To install the software
1Close any open applications.
2Insert the CardScan Image Capture
software CD into your CD-ROM drive.
After a few seconds, the installation
screen appears.
If the installation screen does not
appear, do the following:
a. On the Windows taskbar, click Start and then choose Run. The Run
dialog box appears.
b. Enter D:\setup.exe (where D is the letter assigned to the DVD drive),
and then click OK.
3When prompted, enter the product key located on the DVD
sleeve, and then click Continue to complete the installation.
NOTE If you choose not to enter the product key at this time, you
will begin a 30-day trial period.