Dyna-Glo DGB300CNP User manual

1
Français p. XX
Español p. XX
70-10-651 Rev. 09/25/17
2-BURNER
LP GAS GRILL
Model #DGB300CNP/DGB300CNP-D
ATTACH YOUR RECEIPT HERE
Serial Number _____________________________ Purchase Date ______________________
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-877-447-4768, 8:30 a.m. – 4:30 p.m., CST, Monday – Friday
or e-mail us at [email protected].
Français p. 28
Español p. 55

2
Assembler/Installer: This manual contains important information necessary for the proper
assembly and safe use of this appliance. Read and follow all warnings and instructions before
assembling and using this appliance. Leave these instructions with the consumer.
Consumer/User: Follow all warnings and instructions when using this appliance.
Retain these instructions for future reference.
TABLE OF CONTENTS
Safety Information ...................................................................................................................... 3
Package Contents ...................................................................................................................... 5
Hardware Contents .................................................................................................................... 6
Preparation ................................................................................................................................. 6
Assembly Instructions ................................................................................................................ 7
Operation Instructions ................................................................................................................. 15
Care and Maintenance ................................................................................................................. 20
Troubleshooting ........................................................................................................................... 23
Warranty ...................................................................................................................................... 25
Replacement Parts List .............................................................................................................. 26
If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open ame.
3. Open lid.
4. If odor continues, keep away
from the appliance and immedi-
ately call your local re depart-
ment.
1. Do not store or use gasoline
or other ammable liquids or
vapors in the vicinity of this or
any other appliance.
2. An LP (liquid propane) cylin-
der not connected for use shall
not be stored in the vicinity of
this or any other appliance.
3. This grill is for outdoor use
only and shall not be used in a
building, garage, under over-
hangs or any other enclosed
area.
4. Do not leave a lit grill unat-
tended. Keep children and pets
away from the grill at all times.
WARNING
DANGER

3
DANGER
CAUTION
• Do not use in an explosive atmosphere. Keep grill area clear and free from combustible
materials, gasoline and other ammable vapors and liquids.
Please read and understand this entire manual before attempting to assemble, operate or install
the product. If you have any questions regarding the product, please call customer service at:
1-877-447-4768, 8:30 a.m. – 4:30 p.m., CST, Monday – Friday.
• Never use charcoal or lighter uid with the grill.
• Do not use gasoline, kerosene or alcohol for lighting.
• The LP gas cylinder used with this appliance must be:
(a) Constructed and marked in accordance with the Specications for LP-Gas Cylinders
of the U.S. Department of Transportation (D.O.T.) or the National Standard of Canada,
CAN/CSA-B339, Cylinders, Spheres and Tubes for Transportation of Dangerous Goods;
and Commision, as applicable; and
(b) Provided with a listed overlling prevention device.
(c) Provided with a cylinder connection device compatible with the connector for outdoor
cooking appliances. This grill is not intended to be used in or installed on recreational
vehicles and/or boats.
• Never keep a lled container in a hot car or car trunk. Heat will cause the gas pressure to
increase, which may open the relief valve and allow gas to escape.
• Always open grill lid slowly and carefully as heat and steam trapped within the grill can burn
you severely.
SAFETY INFORMATION

4
SAFETY INFORMATION
• Do not place the grill under overhead
combustible construction or awnings.
Minimum clearance from sides and
back of unit to combustible construction,
36 inches (914.4mm) from sides and
back.
NOTE: The installation must conform with
local codes or, in the absence of local
codes, with either the National Fuel Gas
Code, ANSI Z223.1/NFPA 54, Natural
Gas and Propane Installation Code, CSA
B149.1, or Propane Storage and
Handling Code, B149.2.
CAUTION
• Do not store or use gasoline or other ammable liquids or vapors in the vicinity of this or any
other appliance.
• An LP cylinder not connected for use shall not be stored in the vicinity of this or any other
appliance.
• This grill is for use with propane gas only (propane cylinder not included).
• Never attempt to attach this grill to the self-contained propane system of a boat, camper trailer,
motor home or house.
• Do not attempt to move the grill while it is lit or when it is hot. The casters should be locked
when not moving the grill.
• Do not use the grill unless it is completely assembled and all parts are securely fastened and
tightened.
• Keep all combustible items and surfaces at least 36 inches (91.44 cm) away from the grill at all
times.
• Do not touch metal parts of grill until it has completely cooled (about 45 minutes) to avoid
burns, unless you are wearing protective gear (pot holders, gloves, BBQ mittens, etc…).
• Do not alter this grill in any manner.
• Clean and inspect the hose before each use. If there is evidence of abrasion, wear, cuts, or
leaks, the hose must be replaced prior to operating the appliance. The replacement hose
assembly will be that which is specied by the manufacturer.
• Move gas hoses as far away as possible from hot surfaces and dripping hot grease.
• Keep the grill’s valve compartment, burners and circulating air passages clean. Inspect the
grill before each use. Do not obstruct the ow of gas or ventilation air.
• The use of alcohol, prescription or non-prescription drugs may impair the operator’s ability
to properly assemble or safely operate the grill.
• Do not leave a lit grill unattended. Keep children and pets away from the grill at all times.
• Do not place this grill on any type of tabletop surface. The grill should be placed on a at and
level surface.
• Do not use the grill in high winds.
WARNING

5
PACKAGE CONTENTS
PART DESCRIPTION QUANTITY
A Warming Rack 1
B Hood and Grill Body Assembly 1
C Cooking Grate 1
D Heat Tent 2
E LP Gas Tank Heat Shield 1
F Side Table Assembly 2
G Grease Cup 1
H Cart Rear Upper Brace Assembly 1
I Cart Rear Lower Brace Assembly 1
J Left Rear Leg Assembly 1
K Cart Left Upper Brace Assembly 1
L Left Front Leg Assembly 1
PART DESCRIPTION QUANTITY
M Cart Left Lower Brace Assembly 1
N Right Rear Leg Assembly 1
O Right Front Leg Assembly 1
P Tank Retention Bracket 1
Q Tank Retention Support Bracket 1
R Cart Front Panel 1
S Cart Right Upper Brace Assembly 1
T Left Rear Leg Cap 1
U Left Front Leg Cap 1
V Wheel 2
W Tank Support Bracket 1
X Cylinder Block Bar 1
B
C
D
A
H
G
E
F
F
I
X
K
L
N
O
M
P
Q
R
W
T
S
U
V
J

6
HARDWARE CONTENTS
M6x12
Bolt
Qty. 30
M6
Wingnut
Qty. 1
M6x18
Bolt
Qty. 2
M5
Wingnut
Qty. 1
Wheel axle
Qty. 2
Cotter pin
Qty. 2
M4x12
Bolt
Qty. 6
M6x26
Bolt
Qty. 1
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list on previous page and hardware contents above. If any part is missing or damaged, do
not attempt to assemble the product. Contact customer service for replacement parts.
Estimated Assembly Time: 50 minutes with 2 people
Tools Required for Assembly and Leak Testing (not included): Phillips screwdriver, Spray bottle,
Plier, Adjustable wrench
CAUTION
THIS UNIT IS HEAVY. Two people required for safe assembly.
Two people required for safe assembly. Some parts may contain sharp edges. Wear protective
gloves if necessary. Read and follow all safety statements, warnings, assembly instructions and
use and care instructions before attempting to assemble and use.
CC
AA BB DD
GG
EE
HHFF
Cotter pin
Wheel axle
Cotter pin
Wheel axle
Cotter pin
Wheel axle

7
Cotter pin
Wheel axle
ASSEMBLY INSTRUCTIONS
1. Install left rear leg cap (T) onto left
rear cart leg (J). Then install left front
leg cap (U) onto left front cart leg(L) as
illustrated. Use four M6x12 bolts (AA) to
fasten the Cart Left Upper Brace Assembly (K)
and Cart Left Lower Brace Assembly (M)
onto Left Front Leg Assembly (L) and Left Rear
Leg Assembly (J).
Hardware Used
M6x12 Bolt
M6x12 Bolt
Cotter Pin
Wheel Axle
x 4
x 4
x 2
x 2
2. Place the tank support bracket (W)
between the Right Front Leg Assembly (O) and
Right Rear Leg Assembly (N), use two
wheel axles (BB) to go through the both two
wheels (V), right front leg assembly (O)
and right rear leg assembly (N), then insert
the two cotter pins (CC) to secure. Use
four M6x12 bolts (AA) to fasten the Cart
Right Upper Brace Assembly (S) onto the right
front leg assembly (O) and right rear leg
assembly (N).
Note: Follow the arrow direction on the Cart
Right Upper Brace Assembly (S) when install.
Hardware Used
2
AA
AA
BB
CC
1
M
J
T
U
L
K
AA
N
V
W
O
AA
BB
S
CC
Cotter pin
Wheel axle
Cotter pin
Wheel axle
Cotter pin
Wheel axle
Cotter pin
Wheel axle

8
ASSEMBLY INSTRUCTIONS
3. Use four M4x12 bolts (DD) to assemble the
cart front panel (R) between the Right Front
Leg Assembly (O) and Left Front Leg
Assembly (L).
Note: The small edge of the front panel (R)
should be on top.
Hardware Used
DD M4x12 Bolt x 4
4. Use four M6x12 bolts (AA) Fasten the Cart
Rear Upper Brace Assembly (H) onto Left
Rear Leg Assembly (J) and Right Rear Leg
Assembly (N).
Note: Follow the arrow direction on the Cart
Rear Upper Brace Assembly (H)
when installing.
Hardware Used
AA M6x12 Bolt x 4
Cotter pin
Wheel axle
Cotter pin
Wheel axle
AA
H
3
4
RDD
OL
J
N

9
AA
HH
M6x12 Bolt x 4
x 1
ASSEMBLY INSTRUCTIONS
5. Use one M6X26 bolts (EE) and one M6 wing
nut (FF) to assemble the Tank Retention Bracket
(P) to Tank Retention support Bracket (Q).
Fasten Tank Retention Bracket (P) and Tank
Retention support Bracket assembly (P+Q) in
the Cart Right Upper Brace Assembly (S)
by using two M6x18 bolts (GG).
6. Insert one of the end of cylinder block bar (X)
into the hole on the bottom of front
panel, insert the other end with thread onto
the Cart Rear Lower Brace Assembly (I). Use
one M5 wingnut (HH) to fasten the cylinder
block bar (X) onto the Cart Rear Lower Brace
Assembly (I). Use four M6x12 bolts (AA) to
fasten the Cart Rear Lower Brace Assembly(I)
onto the two rear leg assembly.
Note: Follow the arrow direction on the Cart
Rear Lower Brace Assembly (I) when install.
Hardware Used
EE
FF
GG
M6x26 Bolt
M6x18 Bolt
M6 Wingnut
x 1
x 1
x 2
Hardware Used
Cotter pin
Wheel axle
Cotter pin
Wheel axle
Cotter pin
Wheel axle
M5 Wingnut
Cotter pin
Wheel axle
Cotter pin
Wheel axle
5
6
GG
EE
QFF
P&Q
P
S
AA
HH
I
X

10
ASSEMBLY INSTRUCTIONS
8. Use two M4x12 bolts (DD) to fasten the LP gas
tank heat shield (E) on the grill body right
brace.
7. With the help of a friend, place hood and grill
body assembly (B) on cart assembly. Use six
M6x12 bolts (AA) to fasten.
Note: When performing Step7, lift grill body
from front and rear panels to avoid injury to
hands and ngers.
Hardware Used
Hardware Used
7
8
B
AA
E
DD
AA M6x12 Bolt x 6
Cotter pin
Wheel axle
DD M4x12 Bolt x 2
Cotter pin
Wheel axle