DOWNDRAFT TABLE SAFETY INSTRUCTIONS
1. Always use a grounded power supply. There is an increased risk
of electric shock with an ungrounded power supply.
2. Don’t expose to rain or wet conditions. There is an increased risk
of electric shock if the switch, cord or motor are wet.
3. Do not abuse the power cord. Never use the cord to move the
table. Never use the cord to pull the plug from an outlet. A
damaged cord increases the risk of electric shock.
4. Use caution when opening or closing the top. Switch power off
and unplug cord before opening top. Remove all work pieces and
tools before opening top to avoid injury. Keep fingers and hands
clear when closing the top to avoid injury.
5. Never use to exhaust chemical vapors
6. Vibration may occur if unit is unlevel.
7. Unplug power cord when accessing blower compartment area.
8. Power switch must be off when servicing filter.
9. Do not use this table to sand or grind materials that
may create sparks.
10. Do not use for explosive metallic dust (Aluminum,
Magnesium, etc.)
Models:
64203 84 cm x 152 cm (33 in. x 60 in.) 64204 91 cm x 183 cm (36 in. x 72 in.)
Reorder No. PD07.05
Supersedes PD06.15
IMPORTANT SAFETY INSTRUCTIONS
SAFETY LEGEND
Keep workplace area free of contaminants while sanding
and finishing wood or non-combustible materials.
Keep machine running when not in use to help clean
the shop environment.
When operating this equipment, basic precautions should always be strictly followed
including the instructions listed below:
Industrial Downdraft Table
Operating Manual
Model: 64204 Shown
Ear protection to be worn when exposure to sound,
exceeds the limits of applicable Federal, State or
local statues, ordinances and/or regulations.