Dynabrade 64492 User manual

DOWNDRAFT TABLE SAFETY INSTRUCTIONS
1. Always use a grounded power supply. There is an increased risk
of electric shock with an ungrounded power supply.
2. Don’t expose to rain or wet conditions. There is an increased risk
of electric shock if the switch, cord or motor are wet.
3. Do not abuse the power cord. Never use the cord to move the
table. Never use the cord to pull the plug from an outlet. A
damaged cord increases the risk of electric shock.
4. Use caution when opening or closing the top. Switch power off
and unplug cord before opening top. Remove all work pieces and
tools before opening top to avoid injury. Keep fingers and hands
clear when closing the top to avoid injury.
5. Never use to exhaust chemical vapors
6. Vibration may occur if unit is unlevel.
7. Unplug power cord when accessing blower compartment area.
8. Power switch must be off when servicing filter.
9. Do not use this table to sand or grind materials that
may create sparks.
10. Do not use for explosive metallic dust (Aluminum,
Magnesium, etc.)
Models:
64492 - 91cm x 183cm (36in. x 72in.)
Reorder No. PD08.09
IMPORTANT SAFETY INSTRUCTIONS
SAFETY LEGEND
Keep workplace area free of contaminants while sanding
and finishing wood or non-combustible materials.
Keep machine running when not in use to help clean
the shop environment.
When operating this equipment, basic precautions should always be strictly followed
including the instructions listed below:
Industrial Downdraft Table
Operating Manual
Model: 64492 Shown
WARNING
Read and understand tool manual before
work starts to reduce risk of injury to
operator, visitors, and tool.
WARNING
Eye protection must be worn at all times,
eye protection to conform to ANSI Z87.1.
WARNING
Respiratory protection to be used when exposed to
contaminants that exceed the applicable threshold
limit values required by law.
WARNING
Practice safety requirements.Work alert,
have proper attire, and do not operate tools under
the influence of alcohol or drugs.
WARNING
Ear protection to be worn when exposure to sound,
exceeds the limits of applicable Federal, State or
local statues, ordinances and/or regulations.
WARNING
Electric shock hazard. Avoid bodily contact with
grounded objects, bodies of water.
Do not damage cord set.
IMPORTANT NOTICE
Buy parts on line at https://Dynashop.co.uk/ for all things Dynabrade
Buy parts on line at https://Dynashop.co.uk/ for all things Dynabrade

COMPLETE ASSEMBLY DIAGRAM
1
2
3
17
18
11 12
22
5
4
6
7 8 9 10
16
19 21
20
23
24
20
2526
13
14
15
17 32
31
30
15 33
34 27 36
29
35
28
27
27
17
19
See page 3 for Label
Identification
2
3740
38 39
Buy parts on line at https://Dynashop.co.uk/ for all things Dynabrade
Buy parts on line at https://Dynashop.co.uk/ for all things Dynabrade

REPLACEMENT PARTS
ITEM NO. PART NO. DESCRIPTION QTY.
164251 Downdraft Table Top 1
264986 Pre-Filter 1
364671 Air Filter 3
464214 Sheave 1
564215 V-Belt 1
664213 Sheave 1
798609 Terminal 13
898422 230V Label 1
998420 Arrow Label 1
10 98615 Wire Connector 1
11 98365 1hp Motor 1
12 64211 Blower 1
13 64239 Hex Nut (Nylon Insert) 4
14 95183 Washer 4
15 64232 Bolt 20
16 98746 Lock Nut 1
17 98701 Cord Grip 3
18 98751 Seal Ring 1
19 64233 Cord 1
20 64230 Screw 28
21 64225 Bracket 2
22 64222 Gas Shock/Spring 2
23 64223 Ball Socket 4
24 64224 Bracket 2
25 64220 Hinge 1
26 64226 T-Nut 28
27 64234 Screw 46
28 65059 Name Plate 1
29 64257 Corner Guard 4
30 64218 Locking Caster 2
31 95042 Lock Washer 16
32 97216 Nut 16
33 64227 Wire Mesh 1
34 64258 Air Dam 1
35 64219 Rigid Caster 2
36 97546 Washer 10
37 97683 Switch 1
38 64216 Box 1
39 97498 Screw 2
40 97684 Switch Cover 2
3
LABEL IDENTIFICATION
64698
Information Label
64696
Electric Warning Label
64697
Spark Warning Label
64679
Replacement Filter Label
REPLACEMENT FILTERS
Reorder No. 64671 Reorder No. 64985
Standard Paper Air Filter Pre-Filter (33x60)
Reorder No. 64672 Reorder No. 64986
UL Rated Class I Pre-Filter (36x72)
Non-Flammable Air Filter
(Filters sold separately / 12 Filters per case)
Dynabrade Customer Service
Within USA Call [phone] or 888-DYNABRADE
www.dynabrade.com
Buy parts on line at https://Dynashop.co.uk/ for all things Dynabrade
Buy parts on line at https://Dynashop.co.uk/ for all things Dynabrade

DOWNDRAFT TABLE SET UP INSTRUCTIONS
1. Make sure power cord is unplugged from power supply.
2. Install two rigid casters and two swivel casters into position as
shown on complete assembly diagram (pg. 2).
3. Remove cardboard strips from bottom of table to
allow for air dam to function properly.
4. Position table in work area and lock swivel casters to
stabilize the table.
5. Install provided filters and pre-filter.
6. Make sure top is closed and power switch is off before plugging
cord into grounded power supply.
DOWNDRAFT TABLE OPERATING AND
MAINTENANCE INSTRUCTIONS
1. Switch power on to begin dust collection.
2. Do not block more than 50% of inlet holes during use.
3. Do not obstruct outlet.
4. Switch power off and unplug cord before opening top.
5. Clean pre-filter and pleated filters daily.
6. Clean top surface only with brush or dry cloth as necessary.
7. Do not use alcohol on top surface.
8. Replace filters every 30-60 days as necessary.
9. Vacuum filter support rails regularly to assure proper seating.
OPTIONAL ACCESSORIES
MACHINE SPECIFICATIONS
SET-UP/OPERATING/MAINTENANCE INSTRUCTIONS
DYNABRADE CUSTOMER SERVICE
US Consumers Call Toll-Free: 1-800-828-7333 • Canadian Consumers Call Toll-Free: 1-800-344-1488
DYNABRADE
®
www.dynabrade.com
©DYNABRADE, INC., 2008 PRINTED IN USA PD08.09_03/08
DYNABRADE, INC.
8989 Sheridan Drive • Clarence, New York 14031-1490 • Phone: [phone]
Fax: [phone] • US Consumers Call Toll Free: 1-800-828-7333
DYNABRADE INTERNATIONAL
8989 Sheridan Drive • Clarence, New York 14031-1490 • Phone: [phone]
Fax: [phone] • Canadian Consumers Call Toll Free: 1-800-344-1488
DYNABRADE EUROPE S.à r. l.
Zone Artisanale • L-5485 Wormeldange-Haut, Luxembourg
Phone: [phone] • Fax: [phone]
DYNABRADE DO BRASIL
Rua Mário Fongaro • 421 – Vila Marlene • São Bernardo do Campo
SP – CEP 09732-530 • Telefax: (11) 4124-6040
REPLACEMENT FILTERS
64671 Standard Paper Air Filter
64672 UL Rated Class I Non-Flammable Air Filter
REPLACEMENT PRE-FILTERS
64986 36 in. x 72 in.
Note: Filters sold separately / 12 Filters per case
REPLACEMENT GRIP TOP
64253 For use with Model: 64492
Model Motor Vacuum Sound Working Area Working Area Height Shipping Wt.
Number W (hp) Voltage Phase Suction Level Width Length cm (Inch) kg (lbs.)
64492 550 (.75) 230/50Hz 1 1900 SCFM 72 dB(A) 91cm (36") 183cm (72") 91 (36) 166 (365)
Buy parts on line at https://Dynashop.co.uk/ for all things Dynabrade
Buy parts on line at https://Dynashop.co.uk/ for all things Dynabrade