Dynabrade 61300 User manual

DYNABRADE, INC. COPYRIGHT 2006

(continued on next page)
1. Do not leave appliance when plugged in. Unplug from outlet when not in use and before servicing.
2. Do not expose to rain. Store indoors.
3. Do not allow to be used as a toy. Not to be used by children.
4. Use only as described in this manual. Use only manufacturers's recommended attachments.
5. Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, return
it to a service center.
6. Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sharp edges or corners. Do not run appliance over cord.
Keep cord away from heated surfaces.
7. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
8. Do not handle plug or appliance with wet hands.
9. Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair and anything that may reduce air flow.
10. Keep hair, loose clothing, fingers and all parts of the body away from openings and moving parts.
11. Do not vacuum anything that is burning or smoking, such as cigarettes, matches or hot ashes.
12. Do not use without filters in place.
13. Turn off all controls before unplugging.
14. Use extra care when cleaning on stairs.
15. Do not pick up flammable or combustible liquids such as gasoline, or use in areas where they may be present.
16. Connect to a properly grounded outlet only. See Grounding Instructions.
17. Use only original spare parts.
1
Supersedes PD05.39
(English Version ONLY)
These Portable Vacuum Systems have been developed as a safe,
portable, mobile, yet powerful industrial tool for commercial use. To
ensure that this quality equipment is properly used and maintained to its
full capability, please carefully read the following safety instructions and
operating procedures before commencement of the operation.
61300 (9.9 gal./36 ltr.) 120v-60Hz (US)
61301 (17 gal./64 ltr.) 120v-60Hz (US)
61302 (9.9 gal./36 ltr.) 230v-50Hz (UK)
61303 (17 gal./64 ltr.) 230v-50Hz (UK)
61304 (9.9 gal./36 ltr.) 110v-60Hz (UK)
61305 (17 gal./64 ltr.) 110v-60Hz (UK)
61306 (9.9 gal./36 ltr.) 230v-50Hz (EUR)
61307 (17 gal./64 ltr.) 230v-50Hz (EUR)
61308 (9.9 gal./36 ltr.) 230v-50Hz (OUS)
61309 (17 gal./64 ltr.) 230v-50Hz (OUS)
61310 (9.9 gal./36 ltr.) 220v-60Hz (KOR)
61311 (17 gal./64 ltr.) 220v-60Hz (KOR)
Portable Vacuum System
Operating Manual
“M” CLASS DRY VACUUM
When employed in accordance with their intended use, the industrial vacuum
cleaners described in these operating instructions are suitable for picking up
non-flammable, dry dusts. They correspond to dust class “M” in accordance to:
EN 60335-2-69. By SLG, Germany
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING
When using an electrical appliance, basic precautions should always be followed, including the following:
- To reduce the risk of fire, electric shock, or injury:

2
ASSEMBLY INSTRUCTIONS
1. While opening the carton, carefully inspect outside of the carton for
any sign of transportation damage, and if so, notify your shipper
immediately.
2. Open carton and remove hoses, hose connectors and other
accessories.
3. Lay carton on its back and wheel the unit out.
4. Remove all packing, release the unit and remove Motorhead/Vacuum
Head Assembly to make sure no packing materials are left inside the
unit.
5. Check to make sure the filter is seated firmly. If not, tighten at base of
filter unit.
6. On the vacuum hose assembly, note that the air supply tube (the
smaller of the two) protrudes at both ends and is longer than the
vacuum hose.
7. Connect quick coupler male end to air outlets located on vacuum
head assembly. (See instruction on card.)
8. Insert vacuum hoses.
9. Connect air supply to air inlet fitting (3/8" NPT female threads)
located at the back side of Motorhead. Air pressure should be
adjusted according to the pressure requirement of the air tools you
are using. Do not exceed 150 PSIG (10.3 Bar). Some pressure drop is
unavoidable between the main air supply and the air tools due to
internal flow resistance in a long air hose.
1/2" INTERNAL DIAMETER SUPPLY AIR LINE is recommended. Set
regulator by installing an in-line pressure gage (Part No. 94315)
at the inlet of the air tool being used. Run the tool and adjust
regulator such that there is 90 PSIG/6.2 Bar @ the tool inlet.
The installation of a Dynabrade Filter-Regulator-Lubricator (FRL
Part No. 11411) is highly recommended to protect the unit and
the air tools.
Where it is critical to avoid shocks or sparks caused by static
electricity, an air supply hose which is electrically conductive
and ground must be used.
10. Install disposable vacuum bag (included) inside main body of Vacuum.
Make sure that vacuum connection tube protrudes through the hole in
the bag.
11. Order dust bags (Part No. 64682 or 80076) before you run out of them.
12. Return Motorhead/Vacuum Head Assembly to the unit and lock the
two rim clamps to secure Motorhead/Vacuum Head Assembly in
position.
13. Connect your Dynabrade air tool or accessory and you are now ready
for working with the Dynabrade Portable Vacuum System.
*IMPORTANT NOTICE* Installation of air inlet fitting on back of vacuum
requires (2) wrenches. This will ensure proper connection and restricts
the internal air hoses from twisting.
Refer to the drawing and parts list for the name and location of parts.
IMPORTANT SAFETY INSTRUCTIONS (CONT.)
After finishing work:
1. Switch off the cleaner and unplug the power cord.
2. Wind up the power cord.
3. Empty dirt tank.
4. Clean the vacuum cleaner inside and outside by suction and wiping.
5. Store the machine indoors in clean, dry place.
6. This appliance is provided with an automatically reset thermal limiter to avoid damage to the motor.
SAVE THESE INSTRUCTIONS
INSTRUCTIONS TO BE STRICTLY FOLLOWED
•Components used in packaging (i.e. plastic bags) can be dangerous: keep away from children and animals.
•ATTENTION: This machine can only be used to suction dry substances and cannot be utilized outdoor with rainy weather.
•The use of this machine for anything not specified in its manual may be dangerous and must be avoided.
•The suction nozzle should be kept away from the body, especially from delicate areas such as eyes, ears and mouth.
•The equipment should be correctly assembled before use.
•Ensure that power socket used is correct for the machine plug.
•Ensure that the voltage indicated on the rating plate is the same as the power supply voltage.
•WARNING: These machines are not designed for picking up health endangering dusts (i.e. fireplace ash) or inflammable/explosive substances.
•Never leave the equipment unattended while in use.
•Never use this equipment to pick up any kind of liquids.
•Always remove the plug from the socket before carrying out any operation with the machine or whenever the machine remains unattended or can be
handled by children or people not conscious.
•The main supply cable should not be used to pull or lift the machine.
•Never immerse the machine in water for cleaning nor use pressure water jets to wash it.
•Should the line cable be damaged, this must be either replaced by the manufacturer or by its service center or in case by a person having similar skills,
so as to prevent any risk.
•If you use extension cables make sure they are placed on dry surfaces and protected from eventual water jets.
•This equipment should not be used to pick up water from containers, sinks, tubs, etc.
•Service and repairs must be carried out by qualified personnel only. Replacement parts for the machine must be original spare parts only.
•The manufacturer cannot be held responsible for any damage/injury caused to persons or property, because of the incorrect use of the machine due to
procedures being used which are not specified in this manual.

3
1. Always wear safety glasses and any other safety items
required by law.
2. The vacuum system will operate by an on/auto/manual switch
located on the front of the Motorhead/Vacuum Head Assembly.
This switch must be turned on to activate the Motorhead.
3. VACUUM SPEED CONTROL: Unit is equipped with a rheostat
motor control. Infinitely adjustable speed allows suction
regulation for wide range of tools. Note: For one tool, please
turn the vacuum speed control to 3/4 power.
4. ELECTRONIC THERMAL PROTECTION DEVICE: Unit is
equipped with a overload prevention system. If this feature is
activated a 20 MINUTE COOL DOWN PERIOD inhibits use.
After a complete 20 minute cool down period has passed the
Electronic Thermal Protection Device will RE-SET automatically
and the unit will be on line ready for use.
5. VISUAL WARNING SIGNAL: Unit is equipped with a visual
warning (yellow) light to indicate when air flow falls below
standard. Turn off vacuum and replace disposable collection
bag. The warning signal will RE-SET automatically and the unit
will be ready for use.
*IMPORTANT NOTICE*
1. For "M" Class Dust Collection, you must use all three
filter elements (Paper Filter, Felt Insert, Disposable Bag).
2. Please inspect all filter elements regularly and replace when
necessary. Dust in the motor area will damage the motor
within a short time. Dust in the motor will Void Warranty.
CAUTION
THIS IS A PRECISION PIECE OF EQUIPMENT designed for dust extraction to keep your ENVIRONMENT
“DUST-FREE.” Read operating instructions before using Dynabrade Portable Vacuum System and be
thoroughly conversant with safety precautions in your locality.
OPERATING INSTRUCTIONS
DISPOSABLE BAG INSTALLATION/REMOVAL INSTRUCTIONS
The following items should be well-noted for the effective use of the unit.
Installation
1. Insert and expand bag.
2. Place bag onto the elbow of the canister unit until rubber
gasket settles in grooved slot of elbow.
Removal
3. Pull bag off and pull tab forward.
4. Push tab until it covers opening and locks with the
rubber gasket.
GROUNDING INSTRUCTIONS
Where it is critical to avoid shocks or sparks caused by static electricity, an electrically conductive and grounded air supply hose must be used.
WARNING
Grounding by means of a ground wire between both ends of the air supply tubing
passing through vacuum hose is recommended.
2
1 43
When vacuuming dusts that are dangerous to health, with values of a maximum concentration in the work place,
or carcinogenic dust of groups I, II and III (e.g., asbestos), the waste dusts require special handling and disposal.
Disposal of hazardous material must conform with health and safety regulations.
Elbow Tab
SPEED CONTROL
MIN MAX
Use 3/4 Power
Position for one
tool operation, full
power for two.