Dynasty P23-MTBB User manual

©Marching USA | 2317 Chester Street Fort Worth, TX 76103 | [phone] | DynastyDrums.com
1
P23-MTBB T-Max Marching Bass Drum Carrier
Updated 2022
ASSEMBLY INSTRUCTIONS
Please follow assembly instructions carefully to ensure optimal product performance.
Questions? Contact us at [email protected] or [phone].
PART DESCRIPTION
T-Max Arm Hook (Right)
T-Max Arm Hook (Left)
Arm Hook Foam Pad Set (R & L)
T-Max Top
T-Max Bottom
Bass Support Bar (A & B)
T-Max Belly Plate
T-Max Tongue (3/8”)
Mini Dynasty Logo (white)
Belly Plate Foam Pad
Bass Tongue Foam Pad
J-Hook Assembly Pack:
5/16“ J-Hooks
5/16” Serrated Flange Lock Nuts
Frame Hardware Pack:
1/4” Serrated Flange Lock Nuts
1/4” x 3/4” Carriage Bolts
1/4” x 1” Carriage Bolts
1
2
3
4
5
6
7
8
9
10
11
12
13
P600-0050
P600-0051
P600-0066
P600-0044
P600-0045
P23-MTBR
P600-0048
P600-0047
P900-0030
P600-0017
P600-0009
P600-0022K
P900-TMF5
1
1
1
1
1
1
1
1
2
2
2
2
4
12
8
4
SKU QTY
PARTS LIST
12
13
1
4
5
6B
6A
7
3
8
9
10
11
3
2
1212
12X 8X 4X
4X 2X

©Marching USA | 2317 Chester Street Fort Worth, TX 76103 | [phone] | DynastyDrums.com
2
Install the J-Hooks from the J-Hook Assembly
Pack (part 12) onto the Arm Hooks (parts 1 & 2)
using two 5/16” lock nuts per J-Hooks as shown.
12 2
Find the Belly Plate Foam Pad (part 10) and peel
o the Velcro backing. Install the strip of loose
Velcro to the Belly Plate (part 7).
2
3
Attach the Bar Bottom (part 5) to the Tongue
(part 8) using two 1/4” x 1” Carriage Bolts from
the Frame Hardware Pack (part 13).
Bar Bottom & Tongue
Before Assembly
4
ASSEMBLY INSTRUCTIONS | P23-MTBB T-Max Marching Bass Drum Carrier
Front
⊳
Back
⊳
Find the Arm Hook Foam Pads (part 3) and peel
o the Velcro backing. Trim the loose strip of
Velcro to install to its corresponding Arm Hook,
leaving a gap around the bolt as shown.

3
©Marching USA | 2317 Chester Street Fort Worth, TX 76103 | [phone] | DynastyDrums.com
ASSEMBLY INSTRUCTIONS | P23-MTBB T-Max Marching Bass Drum Carrier
Attach the Bar Top (part 4) to the Bar Bottom
(part 5) using two 1/4” x 3/4” Carriage Bolts
and two lock nuts from the Frame Hardware
Pack (part 13).
NOTE: Keep the Bar Top above
the Bar Bottom when installing.
⊳
5
Assemble the Bass Support Bar (part 6A & 6B)
using two 1/4” x 3/4” Carriage Bolts and two 1/4”
lock nuts.
6
NOTE: Keep part 6B above
part 6A when attaching them.
⊳
Stack the Belly Plate (part 7), Tongue (part 8), and
Bass Support Bar (part 6A &6B) and attach using
two 1/4” Carriage Bolts and
two 1/4” lock nuts.
Attach the Bass Tongue Velcro
to the back of the Bass Tongue and
cut where the Bass Tongue meets
the Bar Bottom.
7
6B
6A
7
8

Questions? We can help!
Contact us at [phone]
or email [email protected].
4
©Marching USA | 2317 Chester Street Fort Worth, TX 76103 | [phone] | DynastyDrums.com
Install remaining foam pads.
2
9
Attach Arm Hooks (parts 1 & 2) to Bar Top using
four 1/4” x 3/4” Carriage Bolts and four lock nuts.
8
Front
⊳
Back
⊳
ASSEMBLY INSTRUCTIONS | P23-MTBB T-Max Marching Bass Drum Carrier