Dynex WS-007 User manual

USER GUIDE
GUIDE DE L’UTILISATEUR • GUÍA DEL USUARIO
RF Modulator
Modulateur HF
Modulador de RF
WS-007

2Contents
Dynex WS-007 RF Modulator
Contents
Introduction .............................................................2
Important safety instructions ...................................3
RF modulator components .......................................4
Setting up your RF modulator ...................................7
Using your RF modulator ..........................................8
Legal notices .............................................................8
Français..........................................
Español ..........................................
Introduction
Your Dynex WS-007 RF modulator lets you connect an external
audio/video device, such as a VCR, DVD player, or video game, to your TV.
Your RF modulator is especially useful for connecting a device to a TV that
does not have built-in audio/video jacks.

Important safety instructions 3
Important safety instructions
• Read and follow these instructions.
• Retain these instructions for future reference.
• Follow all warnings.
• Do not use your RF modulator near water. Do not expose
your RF modulator to dripping or splashing liquids. Do not
place objects filled with liquid, such as a vase, on top of
your RF modulator. Do not expose your RF modulator to
rain.
• Clean your RF modulator with a dry cloth only.
• Do not block ventilation openings.
• Do not install near a heat source, such as a radiator, heat
register, stove, or other heat producing device (including an
amplifier).
CAUTION
Risk of electric
shock.
Do not open.
The lightning flash with
arrowhead symbol inside a
triangle is intended to alert
you to the presence of
uninsulated dangerous
voltage within your RF
modulator’s enclosure. This
voltage may be strong
enough to cause an electric
shock.
The exclamation point
inside a triangle is intended
to alert you to important
operating and
maintenance instructions.

4RF modulator components
• Do not defeat the safety purpose of the polarized plug. A
polarized plug has two blades with one blade wider than
the other. The wide blade is a safety feature. If the plug
does not fit into your electrical outlet, contact an electrician
to relace the obsolete outlet.
• Do not walk on, set items on, or pinch the power cord,
especially at the plug and the back of your RF modulator.
• Unplug your RF modulator during lightning storms or when
you do not intend to use your RF modulator for an
extended period of time.
• Use and store your RF modulator indoors only. Extreme
temperatures and humid environments can damage
internal electronic components.
RF modulator components
Package contents
•RFmodulator
•Userguide

RF modulator components 5
Front
LED

6RF modulator components
Back
Component Description
1 Power cord Plug the power cord into an electrical outlet.
2 L AUDIO Plug the left audio connector on an A/V cable
into this jack.
3 R AUDIO Plug the right audio connector on an A/V
cable into this jack.
4 VIDEO Plug the video connector on an A/V cable into
this jack. If you use this jack, do not plug a
cable into the S-VIDEO jack.
5 OHMS 75/1K Slide this switch to get the best video image.
6 S-VIDEO Plug an S-Video cable into this jack. If you use
this jack, do not plug a cable into the VIDEO
jack.

Setting up your RF modulator 7
Setting up your RF modulator
To set up your RF modulator:
1Plug an A/V cable’s video (yellow) connecter into the VIDEO
jack on the back of your RF modulator and into the video
out jack on your external device.
Or
Plug an S-Video cable into the S-VIDEO jack on the back of
your RF modulator and into the S-Video out jack on the
back of your external device.
2Plug the A/V cable’s the right (red) and left (white) AUDIO
connectors into the corresponding jacks on the back of your
RF modulator and into the audio out jacks on your external
device.
3Plug one end of a coaxial cable into the ANT IN jack on the
back of your RF modulator and the other end into your
antenna or cable TV jack.
4Plug one end of a coaxial cable into the TO TV jack on the
back of your RF modulator and the other end into the
antenna in jack on the back of your TV.
5Plug the power cord into the power connector on the back
of your RF modulator and into and electrical outlet.
7 TO TV Plug one end of a coaxial cable into this jack
and plug the other end of the cable into the
antenna in jack on the back of your TV.
8 CHANNEL Slide this switch to channel 3 or 4.
9 ANT IN Plug one end of a coaxial cable into this jack
and plug the other end into your antenna or
cable jack.
Component Description

8Using your RF modulator
Using your RF modulator
To use your RF modulator:
1Make sure that you have connected your RF modulator to
your external device and TV.
2Set your RF modulator’s channel switch to channel 3 or 4.
3Turn on your TV, then tune to the channel you set your RF
modulator to (either channel 3 or 4).
4Turn on your external device.
5Set the OHMS 75/1K switch on the back of your RF
modulator to the position that produces the best TV image.
When your RF modulator is receiving a signal from your
external device, the LED indicator on the front of your RF
modulator turns on.
6To watch TV, turn off your external device.
Legal notices
FCC Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received,
including interference that may cause undesired operation.
Copyright
© 2006 Dynex. DYNEX and the DYNEX logo are trademarks of Best Buy
Enterprise Services, Inc. Other brands and product names are trademarks
or registered trademarks of their respective holders. Specifications and
features are subject to change without notice or obligation.

Table des matières 9
Modulateur HF Dynex WS-007
Table des matières
Introduction .............................................................9
Instructions de sécurité importantes ......................10
Composants du modulateur HF ...............................11
Installation du modulateur HF ................................14
Utilisation du modulateur HF ..................................15
Avis juridiques ........................................................16
Introduction
Le modulateur HF Dynex WS-007 permet de connecter un appareil
audio/vidéo externe (magnétoscope, lecteur de DVD ou console de jeux
vidéo) à un téléviseur. Il est particulièrement utile pour connecter un
appareil à un téléviseur qui n'est pas équipé de prises audio/vidéo.

10 Instructions de sécurité importantes
Instructions de sécurité
importantes
• Lire avec attention toutes les instructions.
• Conserver ces instructions pour les consulter
ultérieurement.
• Respecter tous les avertissements.
• Ne pas utiliser ce modulateur HF près de l’eau. Ne pas
exposer cet appareil aux gouttes d’eau ou aux
éclaboussures. Ne pas placer d’objets tels qu'un vase rempli
de liquide sur le modulateur HF. Ne pas utiliser ce
modulateur HF près de l’eau.
• Le nettoyer uniquement avec un chiffon sec.
• Ne pas en obstruer les ouvertures.
• Installer l’appareil à l’écart de sources de chaleur, telles que
radiateurs, bouches de chaleur, poêles ou autres appareils
(y compris les amplificateurs) qui produisent de la chaleur.
ATTENTION
Risque de choc
électrique.
Ne pas ouvrir.
L’éclair à pointe de flèche
dansun triangle équilatéral
a pour objet d’alerter
l’utilisateur de la présence
d’une tension dangereuse
non isolée à l’intérieur de
l’appareil. Cette tension
peut être suffisante pour
provoquer un choc
électrique.
Le point d’exclamation à
l’intérieur d’un triangle est
destiné à alerter
l’utilisateur de la présence
d’instructions importantes
sur le fonctionnement et
sur la maintenance.