Dyson supersonic HD01 User manual

Operating manual
Руководство по эксплуатации
HD01
JN.80730 PN.306639-21-02 08.02.16

2

3
Thank you for buying the
Dyson Supersonic™ hair dryer.
To read your manual in
English go to page 4.
Благодарим вас за
приобретение фена
Dyson Supersonic™.
Инструкция на русском
языке находится на
странице 26.

4
EN
IMPORTANT
SAFETY
INSTRUCTIONS
BEFORE USING THIS
APPLIANCE READ ALL
INSTRUCTIONS AND
CAUTIONARY MARKINGS IN
THIS MANUAL AND ON THE
APPLIANCE
When using an electrical
appliance, basic precautions
should always be followed,
including the following:
WARNING
THE CONCENTRATOR AND
DIFFUSER ACCESSORIES
CONTAIN MAGNETS.
TO REDUCE THE RISK OF
FIRE, ELECTRIC SHOCK,
OR INJURY:
1. Keep away from pacemakers,
defibrillators, credit cards and
electronic storage media.
WARNING
THESE WARNINGS APPLY
TO THE APPLIANCE,
AND ALSO WHERE
APPLICABLE, TO ALL TOOLS,

5
ACCESSORIES, CHARGERS
OR MAINS ADAPTORS.
2. This Dyson appliance can be
used by children aged from
8 years and above and persons
with reduced physical, sensory
or reasoning capabilities,
or lack of experience and
knowledge, only if they have
been given supervision or
instruction by a responsible
person concerning use of
the appliance in a safe way
and understand the hazards
involved. Cleaning and user
maintenance shall not be made
by children without supervision.
3. Do not allow to be used as a
toy. Close attention is necessary
when used by or near children.
Children should be supervised
to ensure that they do not play
with the appliance.
4. If the appliance is used in a
bathroom, unplug after use.
The proximity of water presents
a hazard even when the
appliance is switched off.
5. WARNING: Do not use this
appliance near bathtubs,

6
showers, basins or other vessels
containing water.
6. If the supply cord is damaged,
it must be replaced or repaired
by the manufacturer, its service
agent or similarly qualified
persons in order to avoid
a hazard.
7. This appliance has a non- self
resetting thermal cut out safety
device to prevent overheating.
If your appliance cuts out,
unplug it from the mains supply
socket and leave to cool.
8. CAUTION: In order to avoid
a hazard due to inadvertent
resetting of the thermal cut-out,
this appliance must not be
supplied through an external
switching device, such as a
timer, or connected to a circuit
that is regularly switched on and
off by the utility company, or
plugged into any socket where
the electrical supply is unstable
or likely to be turned off.
9. For additional protection, the
installation of a residual current
device (RCD) having a rated
residual operating current not
exceeding 30 mA is advisable.
Ask your installer for advice.

7
10. Do not use the appliance
for any other purpose than
drying hair.
11. Do not handle any part of
the plug or appliance with
wet hands.
12. Do not unplug by pulling on
the cable. To unplug, grasp
the plug, not the cable. The
use of an extension cable is
not recommended.
13. Do not stretch the cord or place
the cord under strain. Keep the
cord away from heated surfaces
and do not wrap the cord
around the appliance.
14. Do not use any lubricants,
cleaning agents, polishes or
air fresheners on any part of
the appliance.
15. Contact the Dyson Helpline
when service or repair is
required. Do not disassemble
the appliance as incorrect
reassembly may result in an
electric shock or fire.
16. If the appliance is not working
as it should, has received a
sharp blow, has been dropped,
damaged, left outdoors, or
dropped into water, do not use
and contact the Dyson Helpline.

8
The air exit, metal ring and
attachments may be hot during use.

9

10
After registering your free 12 month guarantee with
B.Z.N.C, your Dyson appliance will be covered for parts
and labour for 12 months from the date of purchase,
subject to the terms of the guarantee.
If you have any questions about your Dyson appliance,
call the B.Z.N.C Customer Service Centre with your serial
number, receipt and details of where/when you bought
the appliance.
Most questions can be solved over the phone by one
of our trained representatives at the B.Z.N.C Customer
Service Centre:
Phone: [phone]
Fax: [phone]
If your appliance needs a repair the B.Z.N.C Customer
Service Centre representative will give details of the
options. If the appliance is under guarantee, the repair will
be done free of charge, under the guarantee conditions.
Your serial number can be found on the rating plate
located on the cable label, towards the plug. Note your
serial number for future reference on the back page of
this manual.
Thank you for buying
the Dyson Supersonic™
hair dryer.
This illustration is for example purposes only.

11
Hair dryers with big bulky
motors have to put them in
the head – that’s why hair
dryer design hasn’t changed
since the 1960s.
We’ve turned convention on
its head and put our powerful
digital motor in the handle.
We also made the Dyson
Supersonic™ hair dryer
intelligent, by giving it a
clever microprocessor which
regulates temperature to help
prevent extreme heat damage
to protect natural shine.

12
In the box
Dyson
Supersonic™
hair dryer
Professional
concentrator
Smoothing
nozzle

13
Diffuser Non-slip mat
Storage
hanger
Professional
concentrator
Smoothing
nozzle

14
Functions

15
Air inlet
Removable filter cage
Easy to remove for cleaning.
Negative ions
Helps reduce static.
Temperature control
4 precise heat settings.
Including a cold setting
to fix your style.
Power on/off
Sliding switch.
Cold shot
Press and hold to deactivate
heat and set style.
Airflow control
3 precise settings.
LEDs

16
Magic magnetic holding
Magnetic accessories can be quickly and easily
attached to the front of the appliance. They can be
rotated 360° so you can position them precisely
where you need them.
Attachments

17
Heat Shield technology
Keeps the surface of the attachments cool
for easy adjustment and close-up styling.
Smoothing nozzle
Dries hair gently using smooth air.
Storage hanger and
non-slip mat
If you store your appliance on a hook,
attach the storage hanger to
the ribbed section at the
base of the handle.

18
Professional concentrator
Fast, precise airflow that spans the length
of your brush.

19
Diffuser
Evenly disperses airflow to dry curls gently
and help reduce frizz. Recommended for use
on the low temperature and flow settings.

20
LEDs
Diagnostics
The LEDs will flash indefinitely to communicate
one of the following warnings:
Settings
When solid, the LED lights indicate which settings
you’re using.
Flow
High
Temperature
Low/scalp mode
Medium
Constant cold/cold shot
No red LED
Fast
Medium
Gentle
Contact call centre
Clean filter. See the Cleaning
section for details.
Maximum thermistor temperature at safety
shut down: 145°C
Maximum operating temperature in normal
working conditions: 105°C