Dyson Airwrap User manual

User manual
SV12 JN.00000 PN.000000-00-00
00.00.00 VERSION NO.01
In the box
Getting started
Using your attachments
Pre-styling
Curling
Shaping
Smoothing
Regular filter maintenance
dyson airwrap logo

In the box
Some attachments may not be included.
You can buy additional attachments at www.dyson.com/mynewairwrap
Dyson Airwrap™
multi-styler
main body
Coanda
smoothing dryer
Filter cleaning brushStorage case
30mm
Airwrap™
barrel
20mm
Airwrap™
barrel
30mm
Airwrap™
long barrel
40mm
Airwrap™
long barrel
40mm
Airwrap™
barrel
Firm
smoothing
brush
Small soft
smoothing
brush
Small firm
smoothing
brush
Round
volumising
brush
Small round
volumising
brush
Wide-tooth
comb
Soft
smoothing
brush
The main body
of the product
without any
attachments.
A flat, hook
shaped
nozzle A cylindrical tool that fits on
to the bottom of the Dyson
airwrap styler

Getting started
Power on/off
with cold shot
Sliding switch with
cold shot to set
your style.
LED
Clean the filter.
See the ‘Regular filter
maintenance’
section for details.
If the red LED lights,
and the filter has already
been cleaned, contact
the Dyson Helpline.
Removable filter cage
Easy to remove for cleaning
(see the ‘Regular filter
maintenance’ section
for details).
Airflow control
3 airflow speeds.
Temperature control
2 heat settings plus
a cold setting
to finish your style.
The LED lights are
loacated at the bottom
of the handle above the
filter cage
The filter cage is
located at the bottom
of the handle.
The temperature control
button is located on the
back, right hand side of
the handle.
The power button is
located in the middle of
the handle. It is a
slider button that pushes
upwards and downwards.
The airflow control
button is located
on the back, left
hand side of the
handle.

Using your attachments
Connecting the attachment
Turn attachment into the main body until it fits securely.
Changing attachments
To change attachment, pull down on the switch to release.
Cool touch tip
During use, the Airwrap™barrels, Round volumising brush and Coanda
smoothing dryer will get hot. To change to another attachment, hold the tip.
Take care when handling hot attachments
Hold the attachment only in the area indicated.
Some attachments may need occasional cleaning.
For more information, go to www.dyson.com/mynewairwrap
Coanda
smoothing dryer
Airwrap™barrel
Round volumising
brush

Pre-styling
Barrels
Step 1
Take a section of hair and bring barrel towards tips. Hair will start to wrap
around barrel.
Step 2
Move styler towards head, no need to twist. Hold for 15 seconds or until dry.
Step 3
Press cold shot for 5-10 seconds to set curl. Switch off to release.
To change curl direction, rotate the cool tip.
Coanda smoothing dryer
Before curling, pre-dry the hair until almost dry.
Comes with two modes (i) drying (ii) smoothing.
Use the cool tip to switch between the two modes.
Curling
clik

Shaping
Smoothing
Smoothing brushes
Step 1
Rough-dry hair with Coanda smoothing dryer.
Step 2
Use Smoothing brush to brush from root to tip.
Tips:
For volume, face bristles outwards.
Turn brush inwards at the ends to create shape.
Coanda smoothing dryer
Rotate cool tip to select Smoothing mode.
Press against hair to switch airflow direction.
How to use the contact bar
Position contact bar against the head until you hear a click and hair attracts.
Run from root to tip to hide flyaways.
clik
Step 3
Use on dry hair to hide flyaways.
Position against hair until it attracts then slowly run down to tips.
For use on dry and straight hair.

Regular filter maintenance
The filter must be cleaned when the white LED starts flashing.
Ensure that you unplug your appliance from the mains electricity supply
and allow to cool down before cleaning your filter.
The Dyson Airwrap™multi-styler has highly tuned technology to give
outstanding performance.
This technology needs to be kept free from dust and hair product residue.
Maintenance is required to maintain performance.
Step 1
Slide the filter cleaning brush over the cable and onto the filter cage.
Using a rotating action, clean the filter cage thoroughly.
Remove the filter cleaning brush.
Step 2
Hold the handle of your appliance and pull the filter cage downwards,
onto the cable.
Gently pull open the filter cage and slide it off the cable.
Filter mesh Filter cleaning
brush
Filter cage
Step 3
Wash the filter cage under a warm, running tap.
Gently pull the filter
cage downwards
towards the cable.
Wash the filter cage
under the tap.t
Slide the filter brush
onto the filter cage and
rotate to clean the filter
cage

Step 4
Shake the filter cage to remove the majority of the excess water,
then leave to dry naturally.
Step 5
Using a rotating and up and down action, clean the filter mesh with the filter
cleaning brush until all the debris has been removed.
Do not use water or chemicals to clean the filter mesh.
Step 6
Gently pull the filter cage open and slide it onto the cable.
Slide the filter cage towards the handle and twist until it snaps into place.
clik
Gently open the filter cage and
slide the cage towards the handle,
twist until it snaps into place
Rotate filter brush
around filter mesh to
clean
Slide the
filter brush
towards the
filter.