DZOFILM PICTOR Series User manual
PICTOR ZOOM LENS
USER’S MANUAL
绘梦师变焦镜头使用说明书
www.dzofilm.com
电影镜头
CINE LENS
Introduction................................................................................1
Safety Notes...............................................................................1
Lens Parts ..................................................................................2
Lens Control ...............................................................................3
Flange Back Adjustment...............................................................4
. Preparation ............................................................................4
. Flange Back Adjustment ..........................................................4
PL Mount Assembly Instruction.....................................................8
EF Mount Assembly Instruction.....................................................9
Specification.............................................................................10
Aer-sales Service ....................................................................11
The Name and Content of Hazardous Substances ..........................13
Contents
Click to go
Users can read the table of content(TOC) to have an overview of the
Gnosis Product Manual. Please clink on the title or link to jump to the TOC
Search keyword
The Search-keyword Function is available in PDF Document. For
example,
In WPS Office, Windows users can search keywords with the keyboard
shortcut <Ctrl+F> and Mac users can execute the same function with
shortcut <Command+F>
Note
Introduction
Thank you for purchasing this product!
Pictor series is a set of high-performance S zoom lenses produced by
DZOFILM. Good representation of details, vivid colors and smooth transition of image
as well as can be characterized in this series of lenses. They are suitable for different
kinds of projects, documentary, MV, commercials, films, live broadcast etc, bringing
audience with pure and vivid image texture and natural transition of focus shiing.
Safety Notes
Please do not watch the sun or bright light source through the lens, otherwise
it will cause visually disabled.
Never use organic solvents such as paint thinner or benzene to clean the lens.
Attach the front and rear caps when the lens is not in use.
Store the lens and filter in cool, dry locations to prevent mold and rust. Do not
store in direct sunlight or with naphtha or camphor moth balls.
Please keep the lens dry and wipe the water droplets off if there are water
droplets on the glass surface.
Leaving the lens near heater or in other extremely hot locations could cause
damage or warping.
Use a blower to remove dust and lint from the glass surfaces of the lens or
filter. To remove smudges and fingerprints, apply a small amount of lens
cleaner to a soft, clean cotton cloth or lens-cleaning tissue and clean from the
center outwards using a circular motion. Do not leave smears or touch the glass
with your finger.
●
●
●
●
●
●
●
Back to Contents
1
Aperture Ring
Zoom Ring
Focusing Ring
Lens Control
Focus Control
Rotate the focus ring to increase or decrease the focus distance.
Zoom Control
Rotate the zoom ring to zoom out, increasing the area visible in the frame or zoom in
on the subject so that it fills a larger area in the frame.
Aperture Control
Rotate the aperture ring to stop aperture down, raising theT-stop and narrowing the
aperture, or lower theT-stop to widen the aperture.
Back to Contents
3
Flange Back Adjustment
Note : You can download and print the chart on DZOFILM website-Support-Download
Center-Tool-Star Chart For Adjusting Back Flange（Click to jump to the website）
Step Two : Aach the lens to the camera;
Step Three : Select the maximum aperture (wide open);
Step Four : Set the object .maway from the camera sensor plane, and adjust it
to the center of the whole image.
.Preparation
.Flange Back Adjustment
Every Pictor lens will process flange back adjustment on standard. But to the
tolerance of different cameras, to achieve the best performance of this product and to
match the cameras, please adjust flange back of the product.
Step One : Rotate the zoom ring to the longest focal length, and rotate the focus
ring until the image to its clearest, mark down the focusing distance S;
Step Two : Rotate the zoom ring to the widest focal length and rotate the focus ring
until the image to its clearest, mark down the focusing distance S;
Step Three : Compare the difference between S and S. If S<S, then need to add
shims; otherwise decrease the shims,
Note : The shim adjustment is evaluated on the angle between S and S. If the
angle is bigger, then need to change more shims and vice versa.
Step Four : Repeat step until S=S.Then it means the lens in under parfocal.
Step One : Ready your subject. You can use a "Star Chart", or other high-resolution
black-and-white objects;
Back to Contents
4
+0.11
+0.08
+0.06
+0.04
0
-0.01
-0.02
-0.04
-0.07
Set the object .m away from the camera sensor plane,
and adjust it to the center of the whole image.
.m
Maximum aperture
Φ
Rotate the focal length to mm, and focus till the image is at its sharpest, the
focusing distance mark is .m (S). And then rotate the zoom ring to mm, re-focus
to the image at its sharpest, current focusing distance mark is .m (S). S<S.
According to the sheet below, add .mm shims on the lens mount and double check.
At this time, both mm and mm focus at the closest under .m focus mark.That
means this lens is under parfocal.
Take Pictor Zoom -mm as an example：
-mm shim adjustment reference
mm focusing
mark S（m）Shim adjustment（mm）
mm focusing
mark S（m）
Back to Contents
5
0.65
0.7
0.75
0.8
0.85
+0.25
+0.2
+0.14
+0.12
0.9 +0.07
+0.09
0.95
1
1.1
+0.04
+0.02
0
1.2 -0.02
1.3 -0.04
1.4 -0.06
1.5 -0.08
1.7 -0.11
2
2.5
3.5
4.5
6
10
-0.14
-0.16
-0.18
-0.2
-0.22
-0.24
1.1
-mm shim adjustment reference
mm focusing
mark S（m）Shim adjustment（mm）
mm focusing
mark S（m）
Note: Shim adjustment: "+" means adding shims, and "-" decreasing shims.
Back to Contents
7
M2*5 Screws
Pin Slot under Lens Mount
PL Mount Assembly Instruction
Align the slot on PL mount to the pin on the rear of lens. Then lay the PL mount flat
on the lens rear and slightly rotate the mount. If the mount cannot move, that means
the mount sits in right place.Tighten the pcs of M* screws symmetrically on by one
to keep the balance of lens mount.
Back to Contents
8
Lens Mark Slot on the front of Lens Mount
Pin Slot under Lens Mount
M2*18 Screws
Notice: Aer changing to EF mount, the rear element will extrude from the lens. Please
do not place the lens on the desk with rear part upside down, in case of causing damage
to lens surface.
EF Mount Assembly Instruction
Align the slot on EF mount to the pin on the rear of lens. Then lay the PL mount flat
on the lens rear and slightly rotate the mount. If the mount cannot move, that means
the mount sits in right place.Tighten the pcs of M* screws symmetrically on by
one to keep the balance of lens mount.
Aer changing mounts, adjusting shim thickness is needed to ensure the accuracy
of focusing. Please refer to following chart about shim adjustment. Focusing marks can
be correct again aer shim adjustment. PL
LPL EF
Unchanged
Unchanged
Back to Contents
9
Focal Length
Name
Colour
Mount
Aperture
Image Circle
Construction
of Optics
Flange Distance
Close Focus
（from sensor plane )
（metric/imperial）
Zoom Ratio
Iris Control
Focus Control
Zoom Control
Front Dia.
(metric/ Imperial)
Length
（metric/imperial）
From lens front plane
to flange back
Filter Size
Gear Pitch
Iris Blade 16
≈1520g≈1600g ≈1700g ≈1880g
164mm（PL）
6.46"/
171.9mm(EF)
6.77"
150mm(PL)
5.9"/
159mm（EF）
6.26"
175mm（PL）
6.89"/
182.9mm(EF)
7.20"
173mm（PL）
6.81"/
181mm(EF)
7.13"
M86*0.75
0.8 Mod
Aluminium alloy
∮95mm/3.74"
Manual (max 270°)
Manual (max 100°)
Manual
(max 64.4°)
Manual
(max 65°)
Manual
(max 72°)
Manual
(max 61°)
21 Elements
in 15 Groups
52mm（PL）/44mm（EF）
∮31.5mm(S35)
0.4m/
1ft4in
2.08X 2.75X 2.5X 2.14X
0.6m/
2ft
0.8m/
2ft8in
0.6m/
2ft
T2.8-22
PL/EF
18 Elements
in 15 Groups
18 Elements
in 13 Groups
21 Elements
in 17 Groups
Weight
Material
20-55mm
Black/White
Pictor
50-125mm12-25mm 14-30mm
Specification
Back to Contents
10
Aer-sales Service
How to Obtain After-Sales Service
If a product does not function as warranted during the warranty period,
you may obtain after-sales service by contacting DZOFILM support team or
DZOFILM’s authorized dealers.Charges may apply for services not covered
by this After-Sales Policy.
The After-Sales Policy varies with the country or region of purchase. Please
contact DZOFILM for information specific to your location.
Warranty Service
DZOFILM grants a minimum warranty period of one year from the date of
purchase for lenses purchased through DZOFILM’s official dealers.
DZOFILM warrants that each DZOFILM product that you purchase will be
free from material and workmanship defects under normal use in
accordance with DZOFILM’s user manual and accompanying documenta-
tion during the warranty period. You may claim warranty service by
returning it to the point of purchase. The owner is responsible for all
shipping costs. The warranty period varies with the country or region of
purchase. Stored proof of purchase in a safe place, as you will need to
provide a valid proof-of-purchase for the warranty service. Parts replaced
during the warranty service become DZOFILM’s property.
Service Outside the Warranty Period
Request for after-sales service will normally be accepted within a period of
roughly 5 years following the end of production, during which time spares
will be kept on hand, although owners may be offered an equivalent
product during this period in the event that spares are not available. The
specific cost standard is subject to DZOFILM’s quotation. Compatibility with
consumables and accessories for the original product is not guaranteed. To
prevent waste, DZOFILM may collect returned parts or products.
Service Turn Around Time
After we receive the product, the after-sales service will generally be
completed within two weeks. This turn around time does not include the
time of return shipping. If there are special circumstances, we will notify
you in advance.
Back to Contents
11
12
What This After-Sales Policy Does NOT Cover
This after-sales policy does not cover the following and charges may apply:
Privacy
DZOFILM obeys all applicable laws and regulations concerning the handling
of names, addresses, phone numbers, and other personal information
provided by users.
× No valid proof-of-purchase of the product;
× Damage caused by unauthorized modification, disassembly, or repair not
in accordance with official instructions or manuals.
× Damage caused by improper installation and operation not in accordance
with official instructions or manuals.
× Damage caused by the storage environment not in accordance with
official instructions or manuals.
× Damage caused by operation in bad weather or environment (i.e. rain,
sand/dust storms, humid environment, etc.).
× Damage caused by, any third party products, including those that
DZOFILM may provide or integrate into the DZOFILM product at your
request.
× Damage caused by any third-party product.
× Damage caused by force majeure;
× Consumable accessories and optional parts that come with this product.
Back to Contents
13
The Name and Content of Hazardous Substances
Hazardous Substances
Part Name
Lens Shell
Inner Mechanics
Optics
Other Parts
This table is formulated in accordance of SJ/T.
:Indicates that the concentration of the hazardous substance of at least
one of all homogeneous materials in the parts may be above the relevant
threshold of the GB/T standard.
Pb Hg Cd Cr(VI) PBB PBDE
○:Indicates that the concentration of the hazardous substance in all
homogeneous materials in the parts is below the relevant threshold of
the GB/T standard.
The "" in the above table indicates that there are one or more exemptions
are applied in the parts stated in RoHS //EU.
Back to Contents
简介...........................................................................................1
安全注意事项 .............................................................................1
镜头部件 ....................................................................................2
镜头控制 ....................................................................................3
后焦调节 ....................................................................................4
1.准备工作 ..............................................................................4
2.调节后焦 ..............................................................................4
PL卡口安装说明 .........................................................................8
EF卡口安装说明 .........................................................................9
技术规格 ..................................................................................10
售后服务 ..................................................................................11
产品中有害物质的名称及含量....................................................12
点击跳转
用户可以通过目录了解说明书整体结构，点击标题或链接即可跳转到相应页
面。
快速搜索关键词
PDF电子文档可以使用查找功能快速搜索关键词。例如在WPS PDF文档中，
Windows用户使用快捷键Ctrl+F，Mac用户使用Command+F即可快速搜索关
键词。
阅读小贴士
安全注意事项
11
● 请勿透过镜头或摄影机观看太阳或明亮的光源，否则会使视力受损;
● 切勿使用涂料稀释剂或苯等有机溶剂清洁镜头；
● 不使用镜头时，请盖上镜头前后盖；
● 为防止发霉，请将镜头和滤镜存放在阴凉、干燥的地方，切不可存放在直射
● 请保持镜头干燥，如受潮或有水滴请擦拭干净后存放；
● 勿将镜头放置在加热器旁或其他极其炎热的地方，可能导致损坏或变形；
● 请使用吹气球去除镜头或滤镜玻璃表面的灰尘，若要去除污点和指纹，可用一
块滴有少许镜头清洁剂的干净软绵布或镜头清洁纸，以圆周运动方式从里向
外进行清洁，注意不要留下污渍，也不要用手指触摸玻璃；
感谢您购买本系列产品！
绘梦师（Pictor）系列是DZOFILM旗下的S35画幅高性能变焦镜头，可以让您在
视频创作时还原拍摄细节，色彩通透、过渡均匀自然。适合在纪录片、MV、中型商业
片、网络电影、直播等场景使用，带来纯净而生动的电影质感，较小的呼吸效应使画
面焦点转换更自然。
阳光下，也不要与石脑油或樟脑丸放一起；
回到目录
1.准备工作
2.调节后焦
重复 1-2 步骤，直到S2等于S1时，说明镜头已处于齐焦状态，完成后焦
调节。
准备好拍摄对象。可使用“星状测试图”，或使用其他黑白相间的、对比
度较高的拍摄对象；
步骤二 ： 镜头安装到相机或摄影机上；
镜头调整为最大光圈；
将拍摄对象放置在距离相机成像面约1.5米处，并调整其位置在画面
中心。
步骤三 ：
步骤四 ：
步骤一 ：
步骤一 旋转变焦环至最长焦端，然后旋转对焦环至画面最清晰状态，记下此时
的对焦刻度值S1；
：
步骤二 旋转变焦环至最广角端，然后旋转对焦环至画面最清晰状态，记下此
时的对焦刻度值S2；
：
步骤三 对比S2与S1的大小，若S2小于S1，则需要增加后焦垫片；若S2大于S1，
则需要减少后焦垫片;
：
步骤四 ：
提 示 垫片的调整量与S1，S2的差值对应的对焦环旋转角度有关，旋转角度
越大，需要调整的垫片越多，反之亦然；
：
提 示 可前往“DZOFILM官网-服务与支持-下载中心-工具-后焦调整镜头-后焦
调整星图处”下载（点击此处跳转）
：
4
绘梦师系列镜头在出厂前会按照标准调整后焦，但不同摄影机的法兰距在出
厂时可能会有一点不同，为了方便与不同的摄影机匹配，达到最佳成像效果，需要
进行后焦调节操作。
回到目录
Other manuals for PICTOR Series
1
Table of contents
Other DZOFILM Camera Lens manuals
