E-Glide D 150 User manual

CONTENTS
1
1. Product and Pars .........................................
2. Basic Operation ............................................
3. Assembly Instructions .................................
4. Charging Instructions ................................
5. Riding Safety ......................................................
6. Scooter Maintenance ................................
7. Folding and Carrying.......................................
8. Warranty Information .....................................
9. Specifications .....................................................
Extension nozzle
Screw x 4
Hex wrench
Charger
PARTS
SCOOTER
PRODUCT AND PARTS
1
2
4
5
6
7
9
11
13

BASIC OPERATION
2 3
Headlight
Shows current speed
Dual drive
1. To turn on long press( 2 seconds)
Switch drive mode
Switch between Level 1 and Level 2
Level 1L evel 2
Front wheel drive Rear wheel drive
(FWD)
(FWD)( RWD)
(RWD)
Rear wheel
Headlight
Speed
Dual Drive
Charging port Kickstand
Brake light
Disc Brake
Buckle
Front wheel
Folding buckle
Folding hook
Control panel
USB Charging port
Headlight
Brake handle
Handle
Pedal

4 5
ASSEMBLY INSTRUCTIONS CHARGING INSTRUCTIONS
1Secure the steerer tube and flick the
kickstand down
3Use the hex wrench to lock the
screws on both sides
2Install the handlebar
4Turn on the scooter using the
on/of buton to test for power.
1open the rubber plug
2Inser the charging plug, when light on charger
turns from red to green the scooter is fully charged.
3Tighten the rubber plug afer charging finished.

RIDING SAFETY SCOOTER MAINTENANCE
Riding electric scooters is dangerous. Always wear safety gear such as a
helmet and knee / elbow pads when riding. Obey the laws in your area and be
coureous to other road users and pedestrians.
1 Do not ride in the rain, or on wet suraces. It is dangerous and water ingress can damage
the scooter.
2 Electric scooters are designed to only be ridden by one person at a time.
CAUTION
1 Use a sof cloth to clean the scooter. Do not use a hose and avoid geting the scooter wet
during cleaning. Water ingress will damage the electrics.
2 Do not use alcohol, gasoline, kerosene or other corrosive chemical solution to clean.
3 When not in use, store the scooter in a cool dry place.
4 Do not store the scooter in direct sunlight, or outdoors where rain or other weather
conditions could damage the scooter.
1 Do not install any other batery than that supplied by the manufacturer.
2 Do not dismantle or puncture the batery.
3 Use only the original charger for charging the scooter.
4 Afer each use, fully charge the scooter to prolong the life of the batery.
5 Do not expose the batery to temperatures higher than 50C or lower than -20C
6 If storing for longer than 30 days, fully charge the batery first. When in storage the batery
must be fully charged every 60 days.
Cleaning and Storage
Batery Maintenance
6 7

8 9
2Stand on the pedal
with one foot, and
push the other foot
backward
1Check the batery indicator
4To slow down, you can release the
accelerator/throtle. For emergency braking,
the front brake handle of the lef handlebar
shall be firmly grasped.
3When the electric scooter slides, move
your other foot on the pedal and stay
steady. Then gently hit the throtle (at than
3km/h speed)
5When turning, lean the body slightly
towards that direction, and slowly turn
the handle.
FOLDING AND CARRYING
FOLD:
OPEN:
First, make sure the power is of.
Second, Hold the tube when open the
folding buton, then find the position of
folding hook, and fix the folding hook
to the rear fender.
When opening, first press the folding
hook, Then hold the steerer tube and
lock the folding buton .

CARRYING:
Please note: Do not carry by handling the rear mudguard
Afer folding, carry with one or both hands by holding the tube
11
WARRANTY INFORMATION
For any fauls or issues you may experience with the G10X electric scooter, please
contact the retailer where you purchased the scooter to have it assessed for
warranty.
The warranty will be null and void if
1Damage is caused by failure to regularly service or maintain the scooter. (eg: tyres, brakes etc.)
2Damage is caused by misuse, trafic accidents or collisions.
3Damage is caused by environmental factors such as rain or excessive sunlight.
4Damage is caused by riding on rough, uneven suraces or from perorming stunts such as jumping the
scooter.
5The scooter has been modified in any way or tampered with by a non authorised repairer.
6The scooter or batery is in any way damaged through malice or rough intent.
7The batery has overheated or been stored at a temperature above or below the recommended
parameters.
8There is any sign of water ingress into any par of the scooter.
9Damage to the scooter caused by natural disaster or irresistible force.
Proof of purchase is required for any warranty claim. All warranties should go through the retailer where you purchased the product.
For furher information on the e-Glide warranty and product care, please visit .e-glide.com.au/warranty
Tyres, brake pads, handlebar grips and plastic decorative covers are not covered by any warranty.
10

User information
Name:
Contact number:
Email:
Address:
Product information
Model:
Repair station:
Date of return:
Faul description:
Faul cause:
GUARANTEE CARD
START DATE OF WARRANTY EXTENSION
START DATE OF WARRANTY EXTENSION
START DATE OF WARRANTY EXTENSION
(DD/MM/YY)
(DD/MM/YY)
(DD/MM/YY)
12
SPECIFICATIONS
13
L x W x H (mm)
Dimensions
Specifications
Weight
Target audience
Main Specs
1130 x 500 x 1150mm
Folded L x W x H (mm) 1130 x 500 x 480mm
Product Weight (kg) 14kg
Max Load 120kg
Age Range 16 - 50 Years
Height 120 - 200cm Tall
Max Speed 25km/h
Range 30km
Max Gradient 15°
Suitable Terrain
Working Temp. -10 - 40
Storage Temp. -20 - 45
Water Resistance IP54
36V
42V
Capacity (WH) 350
management system Over Current / Double Over Discharge Protection
Charger
Rated Current (A) 1.5
CCC, ROHS
Charging time (h) Approx 5 hours
Rated Power 350W
Max Power 550W
Rated Power 71
100 - 240V ~
42
Motor