E-Ready Furniture LB-DUR-CD44 User manual

CORNER WRITING DESK (LB-DUR-CD44)
Questions, problems, missing parts? Before returning to the store call
Customer Service
Time available: 8:00 am - 5:00 pm PST
Hotline: [phone]
Thank you for choosing E-Ready Furniture.
1 of 10
Assembly Instructions

2 of 10
Part List:
Part
1Wooden top 1
2
3
Keyboard drawer
Left side frame
1
1
4Right side frame
Left post
Right post
1
51
61
Description Quantity Part
7Wooden shelf 1
8
9Top left stretcher
Top front stretcher 1
1
10 Top right stretcher 1
11 Bottom side stretcher 2
12 Crossed stretcher 2
Description Quantity
Getting to know your product
Part
H1 4
Description Quantity
Hardware List:
NOTE: Hardware not shown to actual size.
Allen Head Bolt(1/4”x1-3/16”)
Allen Head Bolt(1/4”x5/8”)
Allen Head Bolt(1/4”x5/16”)
H2 23
H3 10
Part
H4 37
Description Quantity
Flat Washer
H5 4
Spring Washer
H6 1
Allen Wrench
H1 H2 H3 H4 H5 H6
Assembly Instructions

3 of 10
Two persons are recommended for assembly.
Unpack the inventory parts on a soft and smooth surface.
Do not use power tools.
Do not overtighten any connectors.
A Philips head screwdriver is required (not included) for the assembly.
Align metal drawer glides on each side of drawer
with metal drawer glides in the case.
Push drawer into the case until clicking sound is heard
and glides are locked together.
To install the drawer:
Press up or down on the back levers in the metal drawer glides
located on each side of the drawer.
To remove the drawer from the case:
Left
Right
Assembly Instructions

4 of 10
Step 1
Step 2
Assembly Instructions
CONNECT TOP LEFE STRETCHER (9),BOTTOM SIDE STRETCHER(11) AND LEFT POST(5) TO THE
LEFT SIDE FRAME(3) WITH ALLAN HEAD BOLT(H3),FLAT WASHER(H4),BY TURNING ALLEN
WRENCH(H6). DO NOT TIGHTEN CONNECTIONS UNTIL AFTER STEP 4
CONNECT TOP RIGHT STRETCHER (10),BOTTOM SIDE STRETCHER(11) AND RIGHT POST(6) TO THE
RIGHT SIDE FRAME(4) WITH ALLAN HEAD BOLT(H3),FLAT WASHER(H4),BY TURNING ALLEN
WRENCH(H6). DO NOT TIGHTEN CONNECTIONS UNTIL AFTER STEP 4

5 of 10
Step 3
CONNECT WOODEN SHELF(7) TO THE ASSEMBLED LEFT SIDE PART( STEP 1) WITH
ALLAN HEAD BOLT(H2),FLAT WASHER(H4),BY TURNING ALLEN WRENCH(H6).
Assembly Instructions

6 of 10
Step 4
Assembly Instructions
CONNECT TOP FRONT STRETCHER (8) TO THE ASSEMBLED LEFT & RIGHT PARTS( STEP 1&2) WITH
ALLAN HEAD BOLT(H3),FLAT WASHER(H4),BY TURNING ALLEN WRENCH(H6), AFTER THAT CONNECT
THE SHELF(7) TO RIGHT ASSEMBLED PART WITH ALLAN HEAD BOLT(H2),FLAT WASHER(H4),
BY TURNING ALLEN WRENCH(H6).TIGHTEN ALL BOLTS.

7 of 10
Step 5
CONNECT KEYBOARD DRAWER(2) TO THE BOTTOM OF THE WOODEN TOP(1) WITHALLAN HEAD
BOLT(H1),FLAT WASHER(H4),SPRING WASHER(H5),BY TURNING ALLEN WRENCH(H6).
THEN TIGHTEN
Assembly Instructions

8 of 10
Step 6
Top front stretcher
Assembly Instructions
CONNECT THE TABLE TOP TO THE ASSEMBLED FRAME WITH ALLAN HEAD BOLT(H2),
FLAT WASHER(H4),BY TURNING ALLEN WRENCH(H6).
THEN TIGHTEN

9 of 10
Step 7
Assembly Instructions
CONNECT CROSSED STRETCHER(12) TO THE FIXED TABLE WITH ALLAN HEAD BOLT(H2),
FLAT WASHER(H4),BY TURNING ALLEN WRENCH(H6) AND TIGHTEN

10 of 10
Corner writing desk hutch
Corner writing desk
Assembly Instructions
ADJUSTABLE LEVER