E-Ready Furniture THREE SHELF BOOKCASE LB-DUR-BS44 User manual

Questions, problems, missing parts? Before returning to the store call
Customer Service
Time available: 8:00 am - 5:00 pm PST
Hotline: [phone]
Thank you for choosing E-Ready Furniture.
1 of 8
Assembly Instructions
THREE SHELF BOOKCASE (LB-DUR-BS44)

2 of 8
Part List:
Part
1Left back leg 1
2
3
Right back leg
Front leg
1
2
4Metal shelf frame 3
5Wooden shelf 3
6Top frame 1
7Crossed stretcher 1
Description Quantity
Getting to know your product
Assembly Instructions

3 of 8
Assembly Instructions
Part
H1 4
Description Quantity
Hardware List:
H2
H1
NOTE: Hardware not shown to actual size.
H3 H4
Allen Head Bolt(1/4”x5/8”)
Allen Head Bolt(1/4”x5/16”)
Flat Washer
H2
H3 16
1H4
12
Wall Anchor
Allen Wrench
H5 1
Wall Screw
H6 1
Wall Strap
H7 1
H6 H7H5
Two persons are recommended for assembly.
Unpack the inventory parts on a soft and smooth surface.
Do not use power tools.
Do not overtighten any connectors.
A Philips head screwdriver is required (not included) for the assembly.

4 of 8
Step 1
Step 2
Assembly Instructions
CONNECT METAL FRAME (4) TO RIGHT BACK LEG(2) & FRONT LEG(3) WITH ALLAN HEAD BOLT(H2),
FLAT WASHER(H3),BY TURNING ALLEN WRENCH(H4). DO NOT TIGHTEN CONNECTIONS UNTIL
AFTER STEP 3
PUT ONE WOODEN SHELF(5) ON BOTTOM METAL FRAME
CONNECT LEFT BACK LEG(1) & FRONT LEG(3) TO THE ASSEMBLED PART(STEP1) WITH
ALLAN HEAD BOLT(H2),FLAT WASHER(H3),BY TURNING ALLEN WRENCH(H4).
TIGHTEN ALL BOLTS

5 of 8
Step 3
Assembly Instructions
INSERT THE TOP FRAME(6) ONTO THE ASSEMBLED SHELF(STEP 1 & STEP 2)

6 of 8
Step 4
PUT THE OTHER WOODEN SHELFS(5) ONTO THE FRAME
Assembly Instructions

7 of 8
Step 5
CONNECT CROSSED STRETCHER(7) TO THE FIXED FRAME WITH ALLAN HEAD BOLT(H1),
FLAT WASHER(H3),BY TURNING ALLEN WRENCH(H4) AND TIGHTEN
Assembly Instructions

8 of 8
Step 6
H5
Wall Pared Mur
Step 7
Mark a desired position on the wall and drill a 17/64" hole,
tap the Wall Anchor (H5) into the wall with care.
Connect the Wall Strap (H7) to the Wall Anchor (H5) on
the wall
with a Wall Screw (H6) by turning the Philips
Head screwdriver clockwise until tight.
Assembly Instructions