Eagle Group 317311 User manual

#5 nuts #3
screws
figure 2.3
figure 2.4
S ep 2 - A ach bo om horizon al suppor bar o ver ical pos assemblies.
bottom horizontal
support bar
figure 2.2
figure 2.1
dust cover
component
#2 bolts
dust cover
lid
PART #317311
EG9883 Revised 07/05
H rdw re
Item qty description part number
1.....4....3⁄8˝ Stem Glide . . . . . . . . 316996
2.....*....3⁄8˝-16 x 7⁄8˝ Bolt. . . . . . . . 303378
3.....8....1⁄4˝-20 x 13⁄4˝ Screw . . . . . 318070
4.....4....1⁄4˝-20 x 1⁄2˝ Screw . . . . . 314193**
5.....8....1⁄4˝-20 Acorn ut . . . . . . 313482
6.....2....1⁄4˝ Black Plug . . . . . . . . 317280
* Quantity of 10 on rac s for removable hangers.
Quantity of 12 on rac s for non-removable hangers.
** For non-removable hanger rac s only.
Tools required for ssembly:
•3⁄8˝ slotted screwdriver
•1⁄2˝ combination wrench
ASSEMBLY INSTRUCTIONS
Cantilever Gown Rack
Eagle Foodservice Equipment, Eagle MHC, SpecFAB, and Retail Display are divisions of Eagle Group. ©2005 by the Eagle Group
• 100 Industrial Boulevard, Clayton, Delaware 19938-8903 U.S.A. • www.eaglegrp.com
• Phone: [phone] • (Foodservice) 800/441-8440 • (MHC/Retail) 800/637-5100
• Fax: [phone] or 302/653-3036
CAUTION
I SPECT CO TE TS IMMEDIATELY A D FILE CLAIM WITH DELIVERI G CARRIER FOR A Y DAMAGE.
SAVE YOUR BOX AND ALL PACKING MATERIALS. YOU ARE RESPO SIBLE FOR DAMAGE TO
YOUR U IT IF RETUR ED IMPROPERLY PACKED.
S ep 1 - A ach glides o pos assemblies.
vertical post
assembly
vertical post
assembly
#1 glides
(con inued on back page)
2
3
4 5
1
6
( OT actual size)
(actual size of hardware)

side of
hanger rail
with hole
figure 5.2
top horizontal support bar
ASSEMBLY INSTRUCTIONS
Cantilever Gown Rack
Eagle Foodservice Equipment, Eagle MHC, SpecFAB, and Retail Display are divisions of Eagle Group. ©2005 by the Eagle Group
• 100 Industrial Boulevard, Clayton, Delaware 19938-8903 U.S.A. • www.eaglegrp.com
• Phone: [phone] • (Foodservice) 800/441-8440 • (MHC/Retail) 800/637-5100
• Fax: [phone] or 302/653-3036
figure 5.1
S ep 5 - Ins all hangers. S ep 6 - Plug holes.
Op ional ou er hanger rail cover
(Note: If removable hanger gown rac was ordered, fill hole
openings with #6 plugs.)
S ep 3 - A ach op horizon al suppor bar o
ver ical pos assemblies.
(Mount support bar and dust covers as shown in S ep 2.)
vertical post
assembly
#2 bolt
side of
hanger rail
with louver
hanger
hanger
rail
#5 nut
#4
screw
outer
hanger rail
cover
inner
hanger rail
#6
plug
(End)
S ep 4 - A ach hanger rail.
hanger
rail