EAGLE X PRO STERIONIZER D5 Series User manual

INSTALLATION, OPERATION AND
MAINTAINANCE MANUAL
STERIONIZER™
D5 Fan

INTRODUCTION
The STERIONIZER™ is a unique and environmentally friendly product that kills viruses in
the spaces in which it is installed. The device produces a defense system that
exterminates various viruses (such as COVID-19 and Influenza) as well as bacteria, molds,
smoke, dust and other contaminants in the air and on surfaces in the space. The product
is self-cleaned, maintenance-free, that produces positive and negative ions that
neutralize harmful pollutants and odors in the home. This compact self-cleaning unit
automatically removes dust and dirt build-up on the needles eliminating the need for
maintenance. The device is suitable for installation in residential HVAC systems as well
as, restaurants, offices, shopping malls, theaters, factories, logistics centers, schools &
educational institutions, hospitals, clinics, nursing homes, hotels ect. D6C unit accepts
12V DC or 24V AC without the use of an external power supply.
Technical Specifications
Model
D5 Series
Ion output (Ions/Sec)
D5 – 10B (1010);
Emitter Points
Nickel Plated Needles
Input voltage
12V DC ± 10%
Output voltage
0-8k V DC
Power Consumption
Average 30mA @ 12V DC
Power Supply
Requirements
Over Current Protection 500mA
Operation environment
Temp. (14°F) – (158°F), Hum. <70%
Storage environment
Temp. (14°F) – (158°F), Hum. <85%
Ozone
< 0.001 ppm
CFM
up to 1,500
LED indicator
green: power “on” - orange: “operation”
Color
D5 – white
Dimensions
1.97x1.57x0.47 Inches (LxWxH)
Dimensions Fan (D5)
4.7x2.8x5.7 Inches (LxWxH)
Weight
D5 - 0.88 Lb
Certifications
UL, CSA, CE, IEC, FCC, RoHS 2 compliant
Ion Balance
Inherently self-balancing system < ± 30V
Discharge time
1000V – 100V @ < 10 sec acc. Spec

Installation Instruction
1. Open the STERIONIZER™ box and take the device and the electricity cable (110V)
2. Put the STERIONIZER™ next to an electricity outlet.
3. Connect the cable to the back of the STERIONIZER device.
4. Connect the plug into the electricity outlet.
5. Turn the STERIONIZER™ device on using the switch on the right side of the device.
6. Ready to go.
Up to 500 sq ft (1,500 CFM) per device and is intended to be use in small spaces such as
offices, rooms, and locations with no central heating/cooling system.
Operation
1. When power is applied to the unit, the STERIONIZER™ will be activated. The switch
indicator must be changed from on to off for proper operation.
2. The STERIONIZER™ is a self-balancing and does not require any type of adjustment.
Troubleshooting
If the unit is not operating, check the following:
1. Verify that all power connections are correct and tight. Reconnect the plug to the
electricity if necessary.
5415 Cameron Street St. 121 Las Vegas, NV 89118
phone [phone] eaglexpro.com
[email protected]