EarthQuake Kompressor K-10 User manual

B
A
S
E
S
R
-
O
L
M
E
.
S
.
.
S
E
S
C
P
A
A
P
C
S
E
S
.
.
S
.
E
M
L
O
-
R
S
E
S
B
A
A
B
S
E
S
R
-
O
L
M
E
.
.
S
.
S
E
C
S
A
P
P
A
S
C
E
S
.
S
..
E
M
L
O
-
R
S
E
S
A
B
B
A
S
E
S
R
.
.
O
.
M
The Sound That Will MOVE You...
5
YEARS
LIMITED
WARRANTY
www.earthquakesound.com

B
A
S
E
S
R
-
O
L
M
E
.
S
.
.
S
E
S
C
P
A
A
P
C
S
E
S
.
.
S
.
E
M
L
O
-
R
S
E
S
B
A
A
B
S
E
S
R
-
O
L
M
E
.
.
S
.
S
E
C
S
A
P
P
A
S
C
E
S
.
S
..
E
M
L
O
-
R
S
E
S
A
B
B
A
S
E
S
R
.
.
O
.
M
Getting tired of the “just me” type of
subwoofer tube, Joseph Sahyoun (VP of
Earthquake Sound Corporation)
integrated the newly patented
Symmetrically Loaded Passive System -
SLAPS into the smallest most compact
tube; thus creating the “KOMPRESSOR”.
The latest and most advanced bass
cylinder to ever exist.
The SLAPS allows to tune the subwoofer
tube in the car to ridiculous low
frequencies, and at the same time get
massive amount of SPL in the sub-
harmonic range. The KOMPRESSOR -
compression - is technologically the most
advanced tube available in the market
today. The small package address looks
and performance: the drivers move clearly
beyond the norms of any other drivers -
over 3”. The KOMPRESSOR is
guaranteed to shake loose the trunk of
your car and its contents.
Here at Earthquake, we believe that good
bass does not have to be expensive, it
does not have to eat up your trunk space
either. Earthquake engineers wrote the
book on deep bass extension. First, they
molded tube enclosures from high density
material; next they developed new drivers
optimized specifically for use in these
tubes... Hence, the “K” subwoofer tube:
the easiest and the most economical way
to add deep, clean, all around bass to your
existing car audio system.
The tube construction is rugged, with
durable moldings designed to blend with
any car interior. All hardware needed to
securely mount the tube is included in the
package. The “K” subwoofer tubes are
passive tuned with the “SLAPS” for
optimum bass response and long lasting
performance. The drivers feature 4-wound
flat wire voice coils (2" diamete
r), for deeper low frequency re sp on
se and smooth high frequency roll off;
thus eliminating the need for
external
crossover.
The Long
Throw piston assembly
provides excellent sub-
harmonic extension.
kompressor
5
YEARS
LIMITED
WARRANTY
K-8”
600 watts max
FR-25Hz-2kHz
impedance 4-ohms
Dimensions
91/2” x 16” (DxL)
K-10”
800 watts max
FR-20Hz-1.5kHz
impedance 4-ohms
Dimensions
12” x 19” (DxL)
2 MODELS TO CHOOSE
FROM
2 MODELS TO CHOOSE
FROM
CAUTION: the
KOMPRESSOR
tube subwoofer is
capable of generating
high sound pressure
levels. You should exercise
caution when operating
these speakers. Long term
exposures to high levels of
sound pressure will cause
permanent damage to your
hearing. Sound pressure levels
exceeding 85dB can be dangerous
with constant exposure, set your audio
system to a comfortable loudness level.
Earthquake Sound Corporation does not
assume liability for damages
resulting from the direct use
of the KOMPRESSOR ,
and urges users to
play music in
moderate
levels.

Before you begin:
1) Locate an area in the rear of the vehicle where you would
like to install your tube subwoofer.
2) Orient the subwoofer so that the active driver- front of
the tube- fires into a corner, about 2 to 4 inches away.
3) Inspect the mounting area to ensure that the mounting
screws will not damage the gas tank, electrical wiring, fuel
lines, spare tire, or any other parts of the vehicle.
4) Ensure that the chosen surface is solid enough to
withstand the stress of subwoofer mounting.
In a hatchback: the tube should lay parallel to the rear of
the vehicle, firing into the corners.
In a sedan: the tube should be secured against the sides of
the trunk, firing toward the rear of the vehicle.
In a trunk: the tube should be mounted behind seat, firing
outward.
RULE OF THUMB: Position the tube so the active
driver is facing a hard reflective surface (3-5”away).
This adds a 3dB gain to the total system response.
Mounting instructions:
1) Place the tube subwoofer in the desired mounting
location and mark the correct place on your vehicle to drill
the required mounting holes.
2) Mount the tube subwoofer by screwing or bolting to the
vehicle through both holes in each leg. Be sure that your
tube subwoofer is securely fastened to your vehicle!
Note: Due to the shifting and jarring that will occur in a
vehicle, the mounting legs should be checked periodically
to ensure that they are fastened securely in place.
Wiring instructions:
Locate the terminal cup on the rear of the tube subwoofer.
Insert the positive speaker output lead from your amplifier
into the gold plated red terminal on your subwoofer tube.
Repeat the process with the negative amplifierlead and
black terminal
Wiring multiple tubes:
Care should be taken to wire all speakers in proper
relativephase. However, if your bass response does not
increaseafter wiring an additional tube, you must reverse
its' polarity.To accomplish this, turn off your system, then
reverse the leads on the second tube subwoofer. If the
bass response improves, your phasing is correct.
In a hatchback: the tube should lay parallel to the
rear of the vehicle, firing into the corners.
In a sedan: the tube should be secured against the
sides of the trunk, firing toward the rear of the
vehicle.

Cut along dotted line & return to Earthquake Sound Corporation. 2727 Mc Cone Avenue, Hayward, CA 94544..
First name:_____________________________________________________
Last name:_____________________________________________________
Street address:__________________________________________________
City:________________________ State:__________ Zip:_____________
Phone number:__________________________________________________
Model number:__________________________________________________
Date of purchase:________________________________________________
Purchase price:__________________________________________________
Serial number:__________________________________________________
Dealer name:___________________________________________________
Dealer address:__________________________________________________
Signature:______________________________ Date:_________________
Apply/write Serial Number
PLEASE RETURN
THE WARRANTY CARD
WITH A COPY OF
SALES RECEIPT.
VALID IN US MAINLAND ONLY
Earthquake warrants the original purchaser that the new car audio product (KOMPRESSOR tube speaker system) be free
from defects in material and workmanship, under normal and proper use, for a period of five (5) years from the date of purchase
(as shown on the original bill of sale with serial number).
Earthquake agrees to repair or replace - at our option - all such defective parts at no charge for labor or materials, subject to the
following provisions: Inspection must disclose that all defects are as specified, and that the defective equipment has not been
altered or repaired by other than factory approved technicians, subjected to negligence, misuse, or accident, damaged by
improper line voltage, or had its serial number or any part of it altered, defaced or removed, or has been used in any way that is
contrary to Earthquake’s written instructions.
WARRANTY LIMITATIONS: Earthquake warranty does not cover products that have been modified or abused. Including but
not limited to damaged speaker cabinet, damaged cabinet finish, bent speaker frame, bent amplifier casing, holes in speaker
cone, surround & dust cap, burnt speaker voice coil, burnt tracers on PCB. A warranty claim will not be valid if the warranty
registration card is not properly filled & returned to Earthquake Sound Corporation, with a copy of the sales invoice.
SERVICE REQUEST: To receive product service, contact the service department at [phone] and request an RMA
number (Return Material Authorization). Items shipped without a valid RMA number will be refused. In most cases, our
technicians might be able to resolve the problem over the phone, thus eliminating the need to ship the product.
SHIPPING INSTRUCTIONS: Product must be packaged in its original protective box/es to minimize transport damage.
Shipper claims regarding items damaged in transit must be presented to carrier. Earthquake Sound reserves the right to refuse
product improperly packed. Original bill of sale must accompany product returned for service. We encourage you to include
with the package a written description of the problem. Ship product to: Hohmann International Group/Earthquake Sound Corp.
2727 Mc Cone Avenue, Hayward, CA94544. Ph [phone].
5
YEARS
LIMITED
WARRANTY