Easylife Eco Heater EL6372 User manual

Eco Heaters
INSTRUCTION MANUAL
Model No. EL6372 / 6373/ 6374
Please read carefully before use and keep for future reference
Imported and distributed by Easylife Group Ltd, London NW1 0JP
Customer service: 0844 441 8448
For more innovative products from Easylife please visit:
www.easylifegroup.com
IN6372/3/4-1 © 2015 Easylife Group Ltd
For more innovative products from Easylife please visit:
www.easylifegroup.com
IN6372/3/4-1 © 2015 Easylife Group Ltd
Customer service: 0844 441 8448
For more innovative products from Easylife please visit:
www.easylifegroup.com
PANTONE 072 C
PANTONE 123 C
IMPORTANT SAFETY INSTRUCTIONS
When installing the Eco Heaters, basic precautions should always be followed. You should always read all
the instructions and keep for reference.
• The heater should always be positioned low down, on a wall or non-fl ammable surface.
• The heater must not be free standing; it must be securely mounted on the wall.
• It is recommended that the heater is not positioned under shelving but if it is, any shelving must be at least
30cm away, to allow air to circulate.
• Do not mount below a mains wall socket.
• Ensure there are no wires or pipes in the wall before fi xing.
• Do not cover the heater at any time. Air must be allowed to circulate freely.
• Do not use if the unit, cable or plug is damaged in any way, no user serviceable parts.
• This heater must not be installed in a bathroom, or any area where it can get wet.
• Do not use the heater until securely fi xed to the wall and the cover fi tted.
• The surface of this heater will get hot. Do not touch.
• Keep away from children.
• The unit is fi tted with a thermal fuse which will cut the power off if the unit overheats.
• Do not allow to get wet.
• For indoor use only.
• Not for commercial use.
DISPOSAL
• Please respect the environment!
• Dispose of the packaging according to the local recycling regulations.
• Dispose of the appliance at the end of its life span according to environmental considerations.
WARNING
• Do not use the Eco Heaters until securely fi xed to the wall and the cover fi tted.
• The surface of this heater will get hot. Do not touch.
• Keep away from children.
• The unit is fi tted with a thermal fuse which will cut off the power if the unit overheats.
• Do not allow to get wet.
• For indoor use only.
• The plug is fi tted with a 5amp fuse . Only replace with a 5amp fuse and never use without a fuse fi tted.
• Not for commercial use.
• Not for use in a bathroom or wet room.
• Do not use if the unit, cable or plug is damaged in any way, no user serviceable parts.
TECHNICAL SPECIFICATION
Thermostat - maximum 130 degree. Rubber cable 1.1m length
Measurements:
6372 60W Heater, with cover: 5cm Dia x 250cm L
6373 120W Heater, with cover: 5cm Dia x 550cm L
6374 180W Heater, with cover: 5cm Dia x 860cm L
Paper weight 60gsm
everyday solutions
™
Est. 1992
everyday solutions
™
Est. 1992
CHEAPER
TO RUN
THAN
A LIGHT
BULB
IN6372_Energy_Heaterss-4pp_A5-CMYK.indd 2-3 25/08/2015 14:40

PANTONE 072 C
PANTONE 123 C
Customer service: 0844 441 8448
For more innovative products from Easylife please visit:
www.easylifegroup.com
Dear Customer
Thank you for purchasing the Eco Heaters.
Keep warm for less with these space-saving, money-saving heaters. Highly effi cient,
they generate more heat from less electricity. Highly versatile, they’re ideal for
providing a secondary, ambient source of heat. There’s a 60W model for utility
rooms, passages and wardrobes; a 120W - ideal for bedrooms and a 180W for larger
rooms and conservatories. In addition, they are rated IP55 for enhanced water
resistance and each heater comes with a protective cover. Which means you can
use your Eco-Heater in a shed, garage or the damp atmosphere of a greenhouse (but
not a bathroom). Fitted with indicator light, safety guards and 1.1m power leads, our
white enamel Eco Heaters are supplied with easy-fi t wall-mounting brackets.
Paper weight 60gsm
everyday solutions
™
Est. 1992
INSTALLATION
This heater must be installed in a horizontal position only. Please do not mount it vertically.
Before installation please check you have all the parts listed below.
4 x Small screw
8 x Large screws with wall plug
2 x Wall attachments
1 x Tube heater
1 x Guard
Secure the Eco Heaters to the Wall Attachments, and screw in place with Small Screw
Hold the heater against the wall and mark the position of the fi xing holes. If fi xing to a studded wall, or a
wooden surface, use the large screw and wall plug. If the wall is hollow, or you are drilling into masonry,
using the pilot holes as guide, drill again using a 6.5mm drill bit and insert a wall plug into each hole.
Once holes are prepared, mount the Tube and secure. Then position and fi x the Guard
Now plug into a mains wall socket. When you switch the wall socket on, the red indicator light will switch on.
And your heater is now on. To turn your heater off, switch the wall socket off, or unplug.
PLEASE NOTE:
• The Eco Heaters can not be used in the bathroom or any area where it can get wet.
• After switching on for the fi rst time, the element may emit a vapour/smell. This is completely normal and
should pass in a few minutes.
• This heater is supplied with a guard. It is recommended that the guard is used at all times as the heater
gets very hot in use.
MAINTENANCE
• Ensure the unit is switched off and cold and wipe with a soft damp cloth and fi nish with a dry cloth.
• Do not use any abrasive cleaners.
IN6372_Energy_Heaterss-4pp_A5-CMYK.indd 4-5 25/08/2015 14:40