Easylife EL6338 User manual

Sensor Safety Lights (2)
INSTRUCTION MANUAL
Model No. EL6338
Please read carefully before use and keep for future reference
Imported and distributed by Easylife Group Ltd, London NW1 0JP
Support Line: 0844 441 8448
For more innovative products from Easylife please visit:
www.easylifegroup.com
IN6338-1 © 2015 Easylife Group Ltd
For more innovative products from Easylife please visit:
www.easylifegroup.com
IN6338-1 © 2015 Easylife Group Ltd
Support Line: 0844 441 8448
For more innovative products from Easylife please visit:
www.easylifegroup.com
PANTONE 072 C
PANTONE 123 C
IMPORTANT SAFETY INSTRUCTIONS
When installing the Sensor Safety Lights, basic precautions should always be followed, which
include the following:
1. Read all the instructions and keep for reference.
DISPOSAL
• Please respect the environment!
• Dispose of the packaging according to the local recycling regulations.
• Dispose of paper and cardboard packaging separately from plastic bags into the corresponding
containers.
WARNING
This product is intended for domestic use only.
TECHNICAL SPECIFICATION
Measures: L8xW6xD3cm
Batteries: Each unit requires 3xAAA 1.5V batteries (not supplied)
Sensor Distance: Up to 3M
Sensor Angle: ≤ 60°
AUTO light time: 25s ± 5s
LED Brightness: 18000-20000 mcd
Paper weight 60gsm
everyday solutions
™
Est. 1992
everyday solutions
™
Est. 1992
Stay safe
with lights
that switch
on and off
automatically
IN6338_Motion Sensor Light-4pp_A5-CMYK.indd 2-3 28/08/2015 11:41

PANTONE 072 C
PANTONE 123 C
Support Line: 0844 441 8448
For more innovative products from Easylife please visit:
www.easylifegroup.com
Dear Customer
Thank you for purchasing the Sensor Safety Lights.
Poorly-lit steps and passageways are accident blackspots. Now you can instantly
reduce the risk of tripping or falling with a pair of quick-fi t Sensor Safety Lights. After
dark the built-in sensor detects movement within a radius of up to 3 metres, triggering
ultra-bright LEDs to switch on and safely light your way. Thirty seconds later they
switch off again. Light head tilts as required to get a directed pool of light as desired.
Very easy to install with to self-adhesive pads, just peel and stick. Battery powered,
so there’s no wiring to worry about, they come in packs of two. Each requires 3xAAA
batteries (not supplied). For indoor use only. Measures: L8xW6xD3cm.
BEFORE USE
• The sensor light can be installed in bedroom, bathroom, kitchen, closet, walkway, corridors, gate, etc
• For indoor use only
INSTRUCTIONS FOR USE
• Open the back case and place 3xAAA batteries (not supplied) into the battery compartment, ensuring
polarities are correct. Always use NEW batteries and ensure they are the same brand.
• For constant light - slide the switch into the “ON” position.
• For motion activated light - slide the switch to “AUTO”. It will switch off automatically after 30 seconds.
3 EASY WAYS TO FIX
1) Stick - Peel off the backing of the double-sided adhesive sticker and press it in place.
2) Magnet - Remove the sticker by simply sliding it, revealing an integral magnet underneath.
3) Hang - Use the mounting-holes at the back of the case (fi xing not included).
MAINTENANCE
• Do not install close to items which release heat, such as refrigerator, stove, air condition etc.
• Remove the batteries if you don’t use the light for a long period of time.
• Always replace batteries with NEW batteries of the SAME type.
Paper weight 60gsm
Genius blue is C90, M7, Y0, K0
Genius green is C90, M7, Y0, K0
everyday solutions
™
Est. 1992
IN6338_Motion Sensor Light-4pp_A5-CMYK.indd 4-5 28/08/2015 11:41