Easypix Cyber Scanner Basic User manual

0

1
Table of Contents
1. Precautions…………………………………..……... 2
2. Preparation……………………………………..…… 5
!Standard Accessories…………………...…… 5
!Parts Names……………………………..…… 6
3. Install The Software…………………………..…….7
!Install the Software in Windows…..…..…….7
!Install the Software in Mac…….………….…8
4. Place Film/Slide into the Holder………………..….9
5. Connecting the Digital Image Copier..…………….10
6. Acquire Picture……………………………………… 11
!Acquire Picture from Windows……………… 11
!Acquire Picture from Mac…………………… 15
7. Edit The Pictures / Photo Editing Tools................. 19
!Adjust…………….………………………….... 19
!Retouch…………..…..……………………….23
!Clipboard…………………………………..….. 25
8. Appendix………………………………………………26
!Specifications…………………………………..26
!Trouble Shooting…………………….…………27
!System Requirements…………………………29
EN

2
Welcome
Thank you for purchasing a Digital Image Copier.
Please take a moment to read through this manual. Its
contents will send you on an educational journey into your
recorder multiple capabilities.
1. Precaution
Before using Digital Image Copier, please ensure that you
read and understand the safety precautions described
below. Always ensure that the image copier is operated
correctly.
•Never operate Digital Image Copier inside of an
aircraft or anywhere else where operation of such
devices is restricted. Improper use creates the risk
of serious accident.
•Do not try to open the case of Digital Image Copier
or attempt to modify Digital Image Copier in any
way. High-voltage internal components create the
risk of electric shock when exposed. Maintenance
and repairs should be performed only by authorized
service providers.
•Keep Digital Image Copier away from water and
other liquids. Do not use Digital Image Copier with
wet hands. Never use Digital Image Copier in the
rain or snow. Moisture creates the danger of fire and
electric shock.
•Keep Digital Image Copier and its accessories out of
the reach of children and animals to prevent
accidents or damage to the image copier.

3
•If you notice smoke or a strange odor coming from
Digital Image Copier, turn the power off immediately.
Take Digital Image Copier to the nearest authorized
service center for repair. Never attempt to repair
Digital Image Copier on your own.
•Use only the recommended power accessories. Use
of power sources not expressly recommended for
Digital Image Copier may lead to overheating,
distortion of the equipment, fire, electrical shock or
other hazards.
•Digital Image Copier may become slightly warm
during use. This does not indicate malfunction.
•If the exterior of Digital Image Copier needs
cleaning, wipe it with a soft, dry cloth.
EN

4
FCC Notice
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses
and can radiate radio frequency energy. If not installed
and used in accordance with the instruction, it may cause
harmful interference to radio communication. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception, which
can be determined by turning the equipment on the off,
the user is encouraged to try to correct the interference by
one or more the following suggestion.
!Reorient or relocate the receiving antenna.
!Increase the distance between the equipment and
the receiver.
!Connect the equipment to a different power outlet
other than the one where the receiver is connected.
!Consult an experienced television or radio
technician for help.
CAUTION
To comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules, this device must
only be installed on computer equipment certified to
comply with the Class B limits.

5
2. Preparation
Standard Accessories
Image Copier QSG CD
135 Slide Holder 135 Negative Film Holder
Clean Brush
EN

6
Part Names
Note: We strongly suggest using the supplied Clean Brush to
insert into the image copier slot and clean the glass surface
periodically to produce a clear image. Please make sure your
film negatives/ mounted slides and cover trays are clean before
inserting into the copier as well. Dust or dirt from the negatives
and cover trays will affect the quality of your scanned images.

7
3. Install the Software
This Digital Image Copier is supported by Microsoft / Mac
UVC (Universal Video Class) and Plug & Play technology.
Therefore, it does not need a separate driver.
To use the Digital Image Copier you must install ArcSoft
MediaImpression in the CD in advance.
Installing the Software in Windows OS computer
1. Insert the installation CD into the CD-ROM drive and
the installation CD menu should appear.
2. When you see the following screen, choose “ArcSoft
MediaImpression” to install the software.
3. Follow the on-screen instructions.
4. The installed software will automatically create a
MediaImpression logo on your desktop.
5. Restart the computer.
EN

8
Installing the Software in Mac OS computer
1. Insert the installation CD into your computer’s CD-ROM
drive and click CD icon.
2. Click” MediaImpression Installer”
3. Follow the on-screen instructions.

9
4. Place Film / Slide Into The Holder
1. Open the negative/ positive slide holder as Illustrated.
2. Put a negative film/ positive slide into holder as
shown.
3. Close the holder and please make sure the holder
close properly.
EN

10
5. Connecting the Digital Image Copier
1. Plug the USB cable of Image Copier into your
computer’s USB 2.0 port. Once connected the Power
LED light will turn on.
2. Insert the loaded film/ slide holder properly into the
slot according to the triangular signs as shown.
IMPORTANT: INSERTING HOLDERS INCORRECTLY
MAY DAMAGE YOUR IMAGE COPIER
(Insert through front entrance)

11
6. Acquire Picture
Acquire Picture from Windows
1. Click on the MediaImpression icon on the desktop
and you will see the following.
2. Click “Acquire”.
Select “Acquire from Film Scanner”.
EN

12
3. Define your save as settings:
a) There are two formats JPG or TIF for setting.
b) There are four quality levels (Highest/ High/
Normal/ Low) for selection in JPG format.
c) Select the location to save your image.

13
d) There are two film sizes (135 film, 110 film) to
choose from. You are suggested to select 135
film, most users do not have 110 film.
110 Film Holder is an optional part.
e) Select the film type you are going to scan.
f) Click “OK”.
EN

14
4. Capturing images
You will see the image to be captured in the live view
window, move the holder to avoid dark edge of the
holder appears in the live view window, the dark edge
will be captured if it appears. If the dark edge is on top
or bottom when taking slide image, tilt the device left
or right will help to locate the image correctly.
Click “Capture” to save image to your computer.
5. Move the film holder and press “Capture” for the next
film scan.

15
Acquire Picture from Mac
1. Click on the MediaImpression icon on the desktop
and you will see the following.
2. Click “Acquire”.
Select “Acquire from Film Scanner”.
EN

16
3. Define your save as settings:
a) There are two formats JPG or TIF for setting.
b) There are four quality levels (Highest/ High/
Normal/ Low) for selection in JPG format.
c) Select the location to save your image.

17
d) There are two film sizes (135 film, 110 film) to
choose from. You are suggested to select 135
film, most users do not have 110 film.
110 Film Holder is an optional part.
e) Select the film type you are going to scan.
f) Click “OK”.
EN

18
4. Capturing images
You will see the image to be captured in the live view
window, move the holder to avoid dark edge of the
holder appears in the live view window, the dark edge
will be captured if it appears. If the dark edge is on
top or bottom when taking slide image, tilt the device
left or right will help to locate the image correctly.
Click “Capture” to save image to your computer.
5. Move the film holder and press “Capture” for the next
film scan.

19
7. Editing The Pictures
First, click on the picture you wish to edit, and then use
the ArcSoft tools to edit.
Edit
Photo Editing Tools
The Photo Editing Tools module includes a complete set
of photo enhancement, editing and retouching tools.
The windows can be stretched to provide a large size
view of the active photo. Double click the module’s tool
bar to maximize the window to fill the computer screen.
In addition to the large photo workspace, the Photo
Editing Tools module includes five distinct sets of tools:
1. Adjust
1.1 Enhance
The Enhance feature includes two types of tools:
- Auto Enhance
Click the “Auto Enhance” button to improve the overall
quality of your pictures with a single click.
- Manual Fix
For precise image enhancement control, adjust the
brightness, contrast and sharpen sliders.
How to enhance a photo manually:
1. Move the sliders to adjust the level of brightness,
contrast, saturation, hue and sharpness.
2. Use the zoom slider to get a closer look at how the
adjustment affects the photo.
3. Click “Apply” if you like the result. Click “Cancel” if you
do not.
EN
EN