EasyPro EPW2 User manual

Linear Diaphragm Compressors
Instructions for
Operation • Safety • Warranty
These linear diaphragm compressors are very durable and the continuous
duty motors are designed for years of service. Ideal for aerating ponds,
water features, bait tanks and large aquariums.
• 115 volt motors are super quiet
• Weatherproof enclosures - can sit outdoors without damage
• Energyecient-operatesononlyafewwattsofpower
• Reliable - linear compressors have few moving parts making them very reliable
CFM Air Flow and Water Depth:
Watts @ 115v 0 2' 4' 6' 8' 10'
EPW2 15 0.8 0.6 0.5 0.4 - -
EPW4 35 1.8 1.6 1.3 1.0 0.9 0.6
EPW6 45 2.5 2.3 2.0 1.8 1.7 1.4
EPW10 96 5.2 5.0 4.6 4.1 3.6 3.1
Installation Instructions:
1. Therststepofinstallationistoattachoneendofthetubingtothecompressor.Sometubingwillattach
directly to the compressor, other sizes may need to use the short piece of rubber hose that is included
with the compressor. If tubing is connected directly, simply slide tubing onto outlet of compressor and
clamp. If an adapter hose is needed, slide one end onto compressor and clamp - the other end can be
connected to the tubing using an adapter so the two sizes will hook to each other.
2. Beforeattachingtheotherendofthetubingtotheairdiuser,trimthetubingtoyourdesiredlength.Once
trimmedyoucanattachthetubingtoyourdiuserandsecurewithaclamp.Youmayhavetoaddweights
to the tubing to get it to sink. If you purchased self weighted tubing then you will not need to add weights.
3. Installthediuserinthelocationofchoiceinyourpond.Note: In freezing climates it is recommended
that you do not locate the diuser in the deepest part of the pond — this is the warmest water in
freezing conditions and should not be disturbed.
4. Put the air compressor in a location so that it cannot fall into the water. While the compressors are weath-
er resistant, it is still advised that you shelter your compressor from the elements. Direct rain and snow
may shorten the life span of the unit. Note: In the winter damp air can condense on the inside wall of the
hose. This can eventually block the hose completely, it is important to check the hose frequently during
freezing temperatures.
EPW2 • EPW4 • EPW6 • EPW10
(Recommended operation in shaded area)

Warning:
For your protection - always unplug the unit from its power source before installing or servicing.
Should the unit appear not to be working, do not attempt to reach, remove or disassemble before
disconnecting from the power source.
1. This pump is solely intended to pump air. Do not use for oil, solvents or any petroleum products (gasoline,
diesel, etc.).
2. Always use a properly grounded AC outlet. Do not immerse the pump's plug in water or attempt to plug in
a wet plug.
3. Provide a “drip loop” for the line cord. This is a loop in the cord below the level of the receptacle or plug
that prevents water from traveling along the cord into the receptacle.
4. Be sure that a Ground Fault Circuit Interrupter (GFCI) is installed in the branch circuit supplying the aquari-
um, fountain or pond equipment.
5. Never remove the ground pin from the plug.
Note: A multiple valve assembly is included for use with aquarium lines, this is an accessory item and can be
discarded if not needed.
Replacement Diaphram Kits:
Part # Fits Part # Fits
EPW2RKN EPW2 EPW6RK EPW6
EPW4RK EPW4 EPW10RK EPW10
Warranty:
Thisproductiswarrantiedagainstanymechanicalormaterialdefectsforaperiodoftwoyearsfromthedateofpurchase(airlter,
appervalvesanddiaphragmsarewearableitemsandarenotcovered).Warrantyonlycoversproperlyinstalledandmaintainedunits.
Thewarrantydoesnotcovernormalwearandtear,noranydeteriorationsueredthroughoverloading,improperuse,negligenceor
accident.Similarly,anymodicationmadebythepurchasertotheproductwillcausethewarrantytobenullandvoid.
All returned items will be inspected to determine cause of failure before warranty is approved.
Warranty does not cover any cost associated with the installation or removal of the product subject to warranty claim.
An RA number must be obtained by calling EasyPro Pond Products at 800-448-3873. It is your responsibility to pay the return ship-
ping charges. Be sure to include the RA number, original receipt (in the form of an invoice or sales receipt), name, return address and
phone number inside of the package. No warranty claims will be honored without the original receipt.
Ensure the product is properly packaged and insured for the replacement value. Damage due to improper packaging is the responsi-
bility of the sender.
The manufacturer or supplier shall not be held liable for any damages caused by defective components or materials of this product;
or for loss incurred because of the interruption of service; or any consequential/incidental damages and expenses arising from the
production, sale, use or misuse of this product.
Themanufacturerorsuppliershallnotbeheldliableforanylossofsh,plantsoranyotherlivestockasaresultofanyfailureordefect
of this product.
800-448-3873 • Grant, Michigan • www.easypropondproducts.com • [e-mail]
6-15
Complete aeration kits available with compressor,
tubing & diffusers. Visit our website for more
information www.easypropondproducts.com