EAW KF465 User manual

A
C
O
U
S
T
I
C
A
L
P
E
R
F
O
R
M
A
N
C
E
P
A
R
T
N
E
R
S
H
I
P
TECHNICAL SPECIFICATIONS KF465
EASTERN ACOUSTIC WORKS
One Main Street, Whitinsville, MA 01588 • (508) 234 - 6158 • FAX (508) 234 - 8251 • Email [email protected] • Web http://www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice. • PUB# KF465/1 p/7/9/99 • Printed In USA
PRELIMINARY DATA
NOMINAL DATA
Frequency Response (1 Watt @ 1m)
±3 dB 47 Hz to 17 kHz
-10 dB 40 Hz
Axial Sensitivity (dB SPL, 1 Watt @ 1m)
LF 97
MF/HF 105
Impedance (Ohms) LF 8
MF/HF 8
Power Handling, AES Standard (Watts)
LF 600
MF/HF 360
Calculated Maximum Output (dB SPL @ 1m)
LF Peak 130.8
MF/HF Peak 136.6
LF Long Term 124.8
MF/HF Long term 130.6
Nominal Coverage Angle/-6 dB points (degrees)
Horizontal 60
Vertical 40
Recommended High-Pass Frequency
24 dB/Octave 40 Hz
Dimensions inches millimeters
Height 33.25 845
Width (front) 19.25 489
Width (rear) 12.79 325
Depth 19.75 502
Trapezoid Angle 10°Per Side
Weights pounds kilograms
Net Weight 115 25.3
Shipping Weight 123 55.8
DESCRIPTION
Abiamplified3-wayfullrangesystem(passivemid/highcross-
over) in a trapezoidal enclosure. Includes a 15-in woofer
(vented), a horn-loaded 8-in MF cone and a 1.4-in exit/
44mm voice coil HF compression driver on a 60 x 40 con-
stant directivity horn.
APPLICATION
The KF465 is engineered for use in portable A/V sound rein-
forcement applications. Includes comprehensive 3/8"-16
mounting/suspension points. Six year warranty.
Applications include:
Ballroom A/V
Corporate A/V
DESCRIPTIVE DATA
Configuration 3-way, Full Range
Powering Biamplified (passive MF/HF
crossover)
LF Subsystem & Loading 1x 15-in, Vented
MF Subsystem & Loading 1x 8-in, Horn-Loaded
HF Subsystem & Loading 1x 1.4-in exit/44mm voice coil
Compression Driver on Constant
Directivity Horn
Cabinet Type (shape) Trapezoidal
Enclosure Materials Baltic Birch Plywood
Finish Black Polyurethane
Connectors 2x AP4 (1 each m/f)
Suspension Hardware 9x 3/8”-16 Mounting Points (2
each top, bottom and sides, 1
back) plus 2x Balance -Optimized
Flyrings (top)
Grill Powder Coated Perforated Steel