ECCB OUTDOOR EO-OB-SET-3PC-DELUXE-INT-HARBOR-SQ User manual

966 Perry Highway, Mercer, PA 16137 • Phone [phone]
ECCBOutdoor.com
Congratulations on the purchase of your new
poly lumber side table. These easy step-by-step
instructions can be used for assembling either the
Harbor Side Table (shown)
or
Outer Banks Square Side Table.
Important
Please Read All Instructions Carefully Before Assembling This Product
• Inspect all parts to make sure that nothing is broken or missing. If something is broken
or missing, please contact our service department at [e-mail].
• The side table must be completely assembled before attempting to use it. Failure to do so
could result in damage to the table or the user.
• Use proper safety gear and follow appropriate safety precautions when assembling this product.
• Important - Do not overtighten the screws.
• Only hand tools should be used for assembly. Do not use power tools.
• ECCB Outdoor will not be liable for any injury or damage resulting
from improper assembly and/or use of this product.
• Failure to follow all instructions will result in the product warranty being voided.
Assembly Instructions
Harbor and Outer Banks Side Table
ECCB
OUTDOOR
V1

966 Perry Highway, Mercer, PA 16137 • Phone [phone]
ECCBOutdoor.com
Parts
Make sure you have received everything. If anything is missing or damaged, please contact our service department
at [e-mail].
Legs - 2 pieces
BMiddle Brace - 2 pieces CTop - 1 pieceA
Hardware - Shown at Actual Size
GNuts - 4 pieces
Important: When attaching the nuts, ALWAYS start with the metal part screwing onto
the bolt/screw. Starting with the plastic part will not work and may cause the chair not
to be properly assembled. See illustration to the right. Plastic Insert
DBolts - 4 pieces
ELag Screws - 4 pieces
Washers - 4 pieces
F
Tools - Provided Tools - Not Included
Allen Wrench 716 in. (11mm) open ended wrench

966 Perry Highway, Mercer, PA 16137 • Phone [phone]
ECCBOutdoor.com
Let’s Get Started!
Step 1 - Attach the Leg
• Flip over the top (A) so the bottom is facing up
• Line up the leg (B) with the pre-drilled holes of the top (A)
• Insert the bolt (D) and tighten on the inside of the leg with a washer (F) and nut (G)
using your open ended wrench
Step 2 - Attach the Middle Braces
• Align the middle brace’s (C) pre-drilled holes with the leg’s (B) pre-drilled holes
• Attach the middle brace (C) to the leg (B) using only the lag screws (E) and Allen wrench provided
• Repeat this step with the other middle brace (C)
The legs are interchangeable
so it doesn’t matter which one
you start with.
Tip
A
B
DGF
E
A
B
C
C

966 Perry Highway, Mercer, PA 16137 • Phone [phone]
ECCBOutdoor.com
Step 3 - Attach the Other Leg
• Line up the other leg (B) with the pre-drilled holes of the top (A)
• Insert the bolt (D) and tighten on the inside of the leg with a washer (F) and nut (G)
using your open ended wrench
• Attach the middle brace (C) to the leg with the remaining lag screws (E) and Allen wrench
Care
Poly lumber is easy to clean and maintain. Dust with a soft cloth or soft bristle brush, and tend to spills and
stains with a mild soap and water. No waterproong, no staining, and no painting is ever required!
IMPORTANT! Periodically check to make sure that all screws are properly tightened.
That’s all there is to it and now you have a great side table that we hope you will enjoy.
Thank you for your business!
DGF
E
B
C
C
A
B