ECCB OUTDOOR Poly Ridge Rocker User manual

ECCB
OUTDOOR
Assembly Instructions
Poly Ridge Rocker
V1
Congratulations on the purchase of your new Poly Ridge Rocker.
You will soon be sitting back and relaxing in the comfort of this
lodge style rocking chair when you follow these easy
step-by-step instructions.
966 Perry Highway, Mercer, PA 16137 • Phone [phone]
ECCBOutdoor.com

Important
Please Read All Instructions Carefully Before
Assembling This Product
• Inspect all parts to make sure that nothing is broken or missing.
If something is broken or missing, please contact our service
department at [e-mail].
• The rocker must be completely assembled before attempting to use it.
Failure to do so could result in damage to the chair or the user.
• Use proper safety gear and follow appropriate safety precautions when
assembling this product.
• Important - Do not overtighten the screws.
• Only hand tools should be used for assembly. Do not use power tools.
• ECCB Outdoor will not be liable for any injury or damage resulting
from improper assembly and/or use of this product.
• Failure to follow all instructions will result in the product warranty
being voided.
966 Perry Highway, Mercer, PA 16137 • Phone [phone]
ECCBOutdoor.com
Hardware - Shown at Actual Size
2 ½” Screws - 20 pcs
A
Tools - Provided
Square Screwdriver

966 Perry Highway, Mercer, PA 16137 • Phone [phone]
ECCBOutdoor.com
Back Spindle - 1 pc
D
Front Spindles - 2 pcs
C
Back - 1 pc
F
Rockers - 2 pcs
H
Arms - 2 pcs
B
Parts
Make sure you have received everything.
If anything is missing or damaged, please contact our service department
at [e-mail].
Seat - 1 pc
E
Top - 1 pc
G
Place the back on a at
surface. If the back can be
rocked, the side facing up
should be placed facing front.

Step 1 - Assembling Side One
• Lay an arm on its side with the pockets facing up. To make this
easier, place the arm on a table with the armrest hanging off the
edge of the table. You can start this process with either arm.
• Then place the following items into the pockets in this order:
Loosely attach each piece with screws before moving
onto the next piece. You will tighten them later in step 3.
• (C) Front Spindles
• (D) Back Spindle - This one is slightly shorter than the front spindles
• (E) Seat - The front of the seat is slightly wider
• (F) Back - See previous page to determine the front and back
• (G) Top - Make sure the curved part is at the top and the tag is on the back
of the rocker
966 Perry Highway, Mercer, PA 16137 • Phone [phone]
ECCBOutdoor.com
G
C
C
D
E
F
C
C
D
E
F
G

Step 2 - Attaching Side Two
• Flip the rocker over with the unassembled side facing up
so that you can attach the second arm (B)
• First insert the spindles into the pockets on the second arm
• Then insert the seat into the pockets and continue moving up the
rocker until everything is aligned.
• Begin to attach the arm using the provided screws.
These screws can be fully tightened during this step.
• Once side two is all attached - tighten the screws on the other
side from Step 1.
966 Perry Highway, Mercer, PA 16137 • Phone [phone]
ECCBOutdoor.com
B
A

A
H
H
Step 3 - Attaching the Rocker Bottoms
• Turn the rocker upside down.
• Attach the rockers (H) to the bottom using the remaining
hardware. The front of the rockers have the hole closest
to the end. See bottom illustration.
966 Perry Highway, Mercer, PA 16137 • Phone [phone]
ECCBOutdoor.com
Back
Front

Care For Your Rocker
Poly lumber is easy to clean and maintain. Dust with a soft cloth or soft
bristle brush, and tend to spills and stains with a mild soap and water.
No waterproong, no staining, and no painting is ever required!
IMPORTANT! Periodically check to make sure that all screws are
properly tightened.
That’s all there is to it and now you have a comfortable rocking chair
that we hope you will enjoy. Thank you for your business!
We would love to see photos of your chairs! Send us your pictures to
[e-mail]
to be entered to win a $50 ECCBOutdoor.com store credit. Rules for the
contest can be found at www.eccboutdoor.com/photocontest.
966 Perry Highway, Mercer, PA 16137 • Phone [phone]
ECCBOutdoor.com
Send Us Your Pictures
Get Entered in a Giveaway!

966 Perry Highway, Mercer, PA 16137 • Phone [phone]
ECCBOutdoor.com
We Hope You Enjoy Your New
Adirondack Chair!
For more great poly lumber
products, check out our full line at
ECCBOutdoor.com
Adirondack Chairs
Side Tables
Rocking Chairs
Dining Sets
Swings
Gliders
Benches
Deep Seating
Harbor Side Table Monaco Collection