ECCB OUTDOOR Outer Banks Adirondack User manual

966 Perry Highway, Mercer, PA 16137 • Phone [phone]
ECCBOutdoor.com
Important
Please Read All Instructions Carefully Before Assembling This Product
• Inspect all parts to make sure that nothing is broken or missing. If something is broken
or missing, please contact our service department at [e-mail].
• The chair must be completely assembled before attempting to use it. Failure to do so
could result in damage to the chair or the user.
• Use proper safety gear and follow appropriate safety precautions when assembling this product.
• Important - Do not over-tighten the screws.
• Only hand tools should be used for assembly. Do not use power tools.
• ECCB Outdoor will not be liable for any injury or damage resulting
from improper assembly and/or use of this product.
• Failure to follow all instructions will result in the product warranty being voided.
Assembly Instructions
Adirondack Chairs
ECCB
OUTDOOR
V1
Congratulations on the purchase of your new Poly Lumber Folding Adirondack Chair.
You will soon be sitting back and relaxing in the comfort of this classic chair when
you follow these easy step-by-step instructions.
These instructions will work for any of the following styles in deluxe or integrated styles.
Outer Banks
Adirondack Chair
(This style is used for instructions)
Harbor
Adirondack Chair
Lake Shore
Adirondack Chair
Captain’s
Adirondack Chair

966 Perry Highway, Mercer, PA 16137 • Phone [phone]
ECCBOutdoor.com
Parts
Hardware - Shown at Actual Size
Make sure you have received everything. If anything is missing or damaged, please contact our service department at
[e-mail].
Back - 1 pc Seat - 1 pc Arms - 2 pcs
1 Right (with cupholder)
1 Left
¼” Washers - 6 pcs
¼” Nut - 6 pcs
A B C Brace D
G
H
Tools - Provided Tools - Not Included
Important: When attaching the nuts, ALWAYS start with the metal part screwing onto
the bolt/screw. Starting with the plastic part will not work and may cause the chair not
to be properly assembled. See illustration to the right. Plastic Insert
¼” x 2” Lag Screws - 2 pcs ¼” x 2 ½” Bolts - 6 pcs
E F
Allen Wrench 716 in. (11mm) open ended wrench

966 Perry Highway, Mercer, PA 16137 • Phone [phone]
ECCBOutdoor.com
Let’s Get Started!
Step 1 - Attach the Seat to the Brace
• Attach the brace (D) to the seat (B) using the lag screws (E)
Step 2 - Attach the Back to the Seat
• Lay the seat and the back on a at surface with the legs extended
• Line up the movable joints on the back (A) with the holes in the rear of the seat (B)
• Attach the back (A) to the seat (B) with the hardware
Lay the seat on its side
when attaching the brace
Tip
B
E
D
A
FGH

966 Perry Highway, Mercer, PA 16137 • Phone [phone]
ECCBOutdoor.com
Step 3 - Attach the Arms to the Chair
• Attach the arms (C) to the back (A) and the brace (D)
• Make sure the bolt is inserted from the inside of the chair when attaching the arm to the brace
To Use the Footrest (only for models with an integrated footrest)
Care
To use the integrated footrest, gently pull it out and unfold the legs. When putting the footrest back, fold up
the legs and push the footrest back in.
Poly lumber is easy to clean and maintain. Dust with a soft cloth or soft bristle brush, and tend to spills
and stains with a mild soap and water. No waterproong, no staining, and no painting is ever required!
IMPORTANT! Periodically check to make sure that all screws are properly tightened.
That’s all there is to it and now you have a comfortable chair that we hope you will enjoy.
Thank you for your business!
Loosely attach the arms
to the back of the chair,
then fold up the chair back to
attach the arms to the brace
Tip
C
FGH
G HF