ECCB OUTDOOR Outer Banks Deluxe Poly Lumber Folding Adirondack... User manual

966 Perry Highway, Mercer, PA 16137 • Phone [phone]
ECCBOutdoor.com
Congratulations on the purchase of your
new Outer Banks Deluxe Poly Lumber
Folding Adirondack Chair. You will soon
be sitting back and relaxing in the comfort
of this classic chair when you follow these
easy step by step instructions.
Important
Please Read All Instructions Carefully Before Assembling This Product
• Inspect all parts to make sure that nothing is broken or missing. If something is broken
or missing, please contact our service department at [e-mail].
• The chair must be completely assembled before attempting to use it. Failure to do so
could result in damage to the chair or the user.
• Use proper safety gear and follow appropriate safety precautions when assembling this product.
• Important - Do not over-tighten the screws.
• Only hand tools should be used for assembly. Do not use power tools.
• ECCB Outdoor will not be liable for any injury or damage resulting
from improper assembly and/or use of this product.
• Failure to follow all instructions will result in the product warranty being voided.
Assembly Instructions
Deluxe Adirondack Chair
ECCB
OUTDOOR
V3

966 Perry Highway, Mercer, PA 16137 • Phone [phone]
ECCBOutdoor.com
Parts
Hardware - Shown at Actual Size
Make sure you have received everything. If anything is missing or damaged, please contact our service department at
[e-mail].
Lag Screws - 2 pcs
Back - 1 pc Seat - 1 pc Arms - 2 pcs
1 Right (with cupholder)
1 Left (with wine holder)
Bolts - 6 pcs Washers - 6 pcs
Nut - 6 pcs
E
A B C Brace D
F G
H
Tools - Provided Tools - Not Included
Allen Wrench
Important: When attaching the nuts, ALWAYS start with the metal part screwing onto
the bolt/screw. Starting with the plastic part will not work and may cause the chair not
to be properly assembled. See illustration to the right. Plastic Insert
716 in. (11mm) open ended wrench

966 Perry Highway, Mercer, PA 16137 • Phone [phone]
ECCBOutdoor.com
Let’s Get Started!
Step 1 - Attach the Seat to the Brace
• Attach the brace (D) to the seat (B) using the lag screws (E)
D
B
E
Step 2 - Attach the Back to the Seat
• Lay the seat and the back on a at surface with the legs extended
• Line up the movable joints on the back (A) with the holes in the rear of the seat (B)
• Attach the back (A) to the seat (B) with the hardware
A
E
FGH
Lay the seat on its side
when attaching the brace
Tip

966 Perry Highway, Mercer, PA 16137 • Phone [phone]
ECCBOutdoor.com
Step 3 - Attach the Arms to the Chair
• Attach the arms (C) to the back (A) and the brace (D)
• Make sure the bolt is inserted from the inside of the chair when attaching the arm to the brace
C
E
FGH
G HF
Care
Poly lumber is easy to clean and maintain. Dust with a soft cloth or soft bristle brush, and tend to spills
and stains with a mild soap and water. No waterproong, no staining, and no painting is ever required!
IMPORTANT! Periodically check to make sure that all screws are properly tightened.
That’s all there is to it and now you have a comfortable chair that we hope you will enjoy.
Thank you for your business!
Loosely attach the arms
to the back of the chair,
then fold up the chair back
to attach the arms to the
brace
Tip