Extremis WALRUS User manual

PRODUCT
CORNER SEAT (LEFT/RIGHT) – MIDDLE SEAT – FOOTSTOOL –
CONNECTING SEATS – MAINTENANCE
WALRUS
© design by dirk wynants
READ INSIDE
ASSEMBLY INSTRUCTIONS,
HOW TO USE, USEFUL TIPS
FOR KEEPING YOUR TOOL FOR
TOGETHERNESS IN SHAPE
LANGUAGES
EN – NL – DE – FR – IT – ES
MORE
WWW.EXTREMIS.BE

LANGUAGES
ENGLISH P. 3
contents p. 3
assembly corner seat p. 6
assembly middle seat p. 8
assembly footstool p. 10
assembly connection piece p. 11
maintenance p. 12
NEDERLANDS P. 15
inhoud p. 15
montage hoekzit p. 18
montage tussenzit p. 20
montage poef p. 22
montage koppelstuk p. 23
onderhoud p. 24
DEUTSCH P. 27
inhalt p. 27
montage eck-modul p. 30
montage mittel-modul p. 32
montage puf p. 34
montage verbindungsstück p. 35
pege p. 36
FRANÇAIS P. 39
contenu p. 39
montage module central p. 42
montage module d’angle p. 44
montage repose-pied p. 46
montage pièce de connexion p. 47
entretien p. 48
ITALIANO P. 51
contenuto p. 51
montaggio seduto ad angolo p. 54
montaggio seduto centrale p. 56
montaggio puf p. 58
montaggio elemento di connessione p. 59
manutenzione p. 60
ESPAÑOL P. 63
contenido p. 63
montaje asiento esquinero p. 66
montaje asiento medio p. 68
montaje taburete p. 70
montaje pieza de conexion p. 71
mantenimiento p. 72
2 content

3 x M8x20 bolts 3 x M8 cap nuts 6 x M8 at washers
1 x seat cushion 1 x backrest
1 x frame 4 x feet 4 x M10x20 bolts
MIDDLE SEAT P. 8
6 x M8x20 bolts 3 x M8 cap nuts 9 x M8 at washers
1 x seat cushion 1 x backrest 1 x armrest
1 x frame 4 x feet 4 x M10x20 bolts
CONTENTS
CORNER SEAT - LEFT, RIGHT P. 6
english 3

4 content
1 x seat cushion
1 x frame 4 x feet 4 x M10x20 bolts
FOOTSTOOL P. 10
CONTENTS

1 x connector base 1 x connector 2 x M8x50 lock bolts 2 x M8 nuts
1 x cushion
CUSHION 85 X 55 CM
1 x blanket 1 x glass bre rod
(L = 985 mm)
BLANKET
OPTIONAL
CONNECTION PIECE P. 16

6 walrus corner seat
3. Attach the back rest to the back of the frame (the side
with no rods present), with the storage pouch facing
outwards. Make sure the holes in the frame match up
with the holes in the backrest. ere is a rod missing
from the frame where the arm rest will be tted.
Bear this in mind as you are positioning the
backrest.
ASSEMBLING THE CORNER SEAT
no. 17 spanner
2 people
no. 5 hex key
+/- 30 min.
2 to 4 trestles
1. Place the frame on trestles (so that you can reach the
underside more easily). Be sure to place the frame with
the rods facing upwards.
2. Attach the 4 feet to each corner of the frame with an
M10x20 bolt. Tighten them using a no. 17 spanner.
4. Push 3 M8x20 bolts, each with one M8 at washer on
them, through the underside of the frame so that they
come out in the body of the backrest, and attach them
with an M8 cap nut.
WHAT YOU NEED

2
3
1
OPTIONAL
If you want to link the modules together using the connector, it is best to do this before you attach the seat
cushion to the frame. You will nd instructions for linking the modules with the connector on page 11.
english 7
5. Now attach the arm rests to the frame, using 3 M8x20 bolts for each arm rest and an M8 at washer on each bolt.
PLEASE NOTE: make sure the holes match up, and then tighten all the bolts in the arm and backrest. TIP:
tighten the bolt at the front rst , then the one at the back and lastly the one in the middle .
1 32
1. Open the cover of the back rest. Attach the blanket to
the backrest using the glass bre rod (L = 985 mm)
included with the blanket.
2. Drape the blanket over the sofa and add the cushion.
6. Place the seat cushion on the frame and x it in place by attaching the Velcro straps to the two rods in the middle.

8 walrus middle seat
no. 17 spanner
2 people
no. 5 hex key
+/- 30 min.
2 to 4 trestles
WHAT YOU NEED
ASSEMBLING THE MIDDLE SEAT
1. Place the frame on trestles (so that you can reach the
underside more easily). Be sure to place the frame with
the small rods pointing upwards.
2. Attach the 4 feet to each corner of the frame with an
M10x20 bolt. Tighten them using a no. 17 spanner.
3. Attach the backrest to the back of the frame (the side
with no rods sticking out), with the storage pouch
facing outwards. Make sure the holes in the frame
match up with the holes in the backrest.
4. Push 3 M8x20 bolts, each with one M8 at washer on
them, through the underside of the frame so that they
come out in the body of the back rest, and attach them
with an M8 cap nut.

If you want to link the modules together using the connector, it is best to do this before you attach the seat
cushion to the frame. You will nd instructions for linking the modules with the connector on page 11.
english 9
6. Place the seat cushion on the frame and x it in place by attaching the Velcro straps to the two rods in the middle.
OPTIONAL
1. Open the cover of the back rest. Attach the blanket to
the backrest using the glass bre rod (L = 985 mm)
included with the blanket.
2. Drape the blanket over the sofa and add the cushion.

10 walrus footstool - connection piece
4. Fix it in place by attaching the Velcro straps to the two
rods in the middle.
no. 17 spanner
1 person
+/- 15 min.
2 to 4 trestles
WHAT YOU NEED
ASSEMBLING THE FOOTSTOOL
1. Place the frame on trestles (so that you can reach the
underside more easily). Be sure to place the frame with
the small rods pointing upwards.
2. Attach the 4 feet to each corner of the frame with an
M10x20 bolt. Tighten them using a no. 17 spanner.
3. Place the seat cushion on the frame