ECG 24 HS01T2S2 User manual

24 HS01T2S2 32 HS01T2S2
40 FS01T2S2 43 US01T2S2
50 US01T2S2
English
Deutsch
Čeština
Slovenčina
Always read the safety&use instructions carefully before using your appliance for the rst time. The user´smanual must be always included.
Bitte lesen Sie vor der Inbetriebnahme des Produktes diese Anleitung und die darin enthaltenen Sicherheitshinweise aufmerksam durch. Die Bedienungsanleitung muss dem Gerät immer beigelegt sein.
Před uvedením výrobku do provozu si důkladně pročtěte tento návod abezpečnostní pokyny, které jsou vtomto návodu obsaženy. Návod musí být vždy přiložen kpřístroji.
Pred uvedením výrobku do prevádzky si dôkladne prečítajte tento návod abezpečnostné pokyny, ktoré sú vtomto návode obsiahnuté. Návod musí byť vždy priložený kprístroju.
SMART TV
INSTRUCTION MANUAL
SMART TV
BEDIENUNGSANLEITUNG
SMART TV
NÁVOD KOBSLUZE
SMART TV
NÁVOD NA OBSLUHU
Smart_TV_24_32_40_43_50_cz_sk_de_en.indb 1Smart_TV_24_32_40_43_50_cz_sk_de_en.indb 1 19.08.2020 17:19:1419.08.2020 17:19:14

Smart_TV_24_32_40_43_50_cz_sk_de_en.indb 2Smart_TV_24_32_40_43_50_cz_sk_de_en.indb 2 19.08.2020 17:19:1419.08.2020 17:19:14

English
English
3
SMART TV
CONTENTS
SAFETY INSTRUCTIONS...................................................................................................................................................................... 2
CONTROLS AND CONNECTION POINTS ON THE TV.............................................................................................................. 4
Controls............................................................................................................................................................................................... 4
Connection points.......................................................................................................................................................................... 4
CONNECTING EXTERNAL DEVICES ............................................................................................................................................... 5
STAND ASSEMBLY................................................................................................................................................................................. 6
REMOTE CONTROLLER ....................................................................................................................................................................... 7
TV OPERATION....................................................................................................................................................................................... 8
First setup .......................................................................................................................................................................................... 8
TV functions.................................................................................................................................................................................... 13
Signal source selection...............................................................................................................................................................13
Picture ...............................................................................................................................................................................................13
Sound ................................................................................................................................................................................................15
Settings.............................................................................................................................................................................................16
Lock ....................................................................................................................................................................................................18
TV programs....................................................................................................................................................................................19
Special functions...........................................................................................................................................................................26
Turning EPG on and o...............................................................................................................................................................26
Teletext .............................................................................................................................................................................................26
Playing les from USB storage devices.................................................................................................................................26
TROUBLESHOOTING..........................................................................................................................................................................28
TECHNICAL SHEET..............................................................................................................................................................................29
SMART TV
English
Smart_TV_24_32_40_43_50_cz_sk_de_en.indb 3Smart_TV_24_32_40_43_50_cz_sk_de_en.indb 3 19.08.2020 17:19:1419.08.2020 17:19:14

English
English
4
5
SAFETY INSTRUCTIONS
Read carefully and save for future use!
Warning: The safety measures and instructions,
contained in this manual, do not include all conditions
and situations possible. The user must understand
that common sense, caution and care are factors that
cannot be integrated into any product. Therefore,
these factors shall be ensured by the user/s using
and operating this appliance. We are not liable for
damages caused during shipping, by incorrect use,
voltage uctuation or the modication or adjustment
of any part of the appliance.
To protect against a risk of re or electric shock, basic
precautions shall be taken while using electrical
appliances, including the following:
ATTENTION
RISK OF ELECTRIC SHOCK, DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT OPEN THE COVER OR
BACK PANEL OF THE DEVICE. THERE ARE NO COMPONENTS INSIDE THAT
THE USER SHOULD REPAIR THEMSELVES. ALWAYS REFER TO TRAINED
SERVICE EMPLOYEES.
The lightning ash with arrowhead symbol, within an equilateral triangle, is intended to alert
the user to the presence of uninsulated “dangerous voltage” within the product that may be of
suciently high to constitute a risk of electric shock to persons.
An exclamation mark within an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the literature enclosed with the
appliance.
1. Read all of the instructions carefully.
2. Keep the instructions for future reference.
3. Pay attention to the warnings in the manual.
4. Follow all instructions.
5. Do not use the device close to water.
6. Clean only with dry cloth.
7. Do not block exhaust vents. Place it according to the instructions from the manufacturer.
8. Do not install near any heat sources such as radiators, heaters, stoves, or other appliances (including
ampliers) that produce heat.
9. Do not bypass the safety function of a grounded outlet. The plug of the power cord is equipped with two
pins and one grounding contact, ensuring your safety. If your outlet does not match the plug of thisTV, ask
an electrician to replace the obsolete outlet.
10. Protect the power cord, do not step on it, or pinch it, especially near the plug and the place where it comes
out of the device.
11. Only use attachments and accessories recommended by the manufacturer.
12. Unplug this device during lightning storms or when unused for long periods of time.
13. Refer to qualied service workers for all necessary repairs. The device requires service if it is damaged in
any way. For example, if the power cord or plug is damaged, liquid has been spilled in the device or an
object has fallen into it, it was exposed to rain or moisture, dropped, or is not operating as usual.
14. The socket to which the TV is connected is used to unplug the device from the mains and must be easily
accessible at all times.
Smart_TV_24_32_40_43_50_cz_sk_de_en.indb 4Smart_TV_24_32_40_43_50_cz_sk_de_en.indb 4 19.08.2020 17:19:1419.08.2020 17:19:14

English
English
4
5
15. Ventilation holes shall not be covered by objects such as newspapers, tablecloths, curtains etc., because
this prevents the necessary ventilation of the device.
16. Do not place any sources of open re on the device, for example burning candles.
17. Respect the ecological disposal of batteries.
18. The device is designed for operation in temperate climates.
19. Prevent water from dripping onto the device and entering it. Do not place objects lled with liquids, such
as ower vases, on the device.
20. Electric discharge can lead to failing device functions. You can manually restore device functionality by
turning the power o and on again.
WARNING:
Do not expose the device to rain or moisture, this reduces the risk of re or electric shock.
WARNING:
Protect the batteries against exposure to high temperatures, e.g. direct sunlight. Do not
throw batteries into a re.
This symbol means that the device is in the second protection class, with double
insulation between dangerous mains voltage and user-accessible parts. Only use
identical spare parts when performing service work.
Warning
This television receiver uses high voltage for operation. Do not remove the back cover of the device. Have all
service operations carried out by qualied workers.
Reminder
Make sure the power cord does not get caught under the TV.
Warning
Do not expose the device to rain or moisture, this reduces the risk of re or electric shock.
Reminder
Do not lean on the TV, tilt it or push it. Pay close attention to the presence of children. A falling device could
cause serious injury.
Warning
Prevent foreign objects entering the ventilation holes of the device. Protect the TV against liquid spills.
Reminder
Prevent foreign objects entering the ventilation holes of the device. A fall could damage the device or cause
injury.
Reminder
Do not cover the ventilation holes in the back cover of the device. Sucient ventilation is necessary for the
proper functioning of electrical components.
Reminder
Minimum spacing distances must be respected if the TV is installed in the entertainment centre compartment
or other enclosed area. Overheating can shorten the life of the device and can also be dangerous.
Reminder
If you are not going to use the TV for a long time, we recommend unplugging the power cord from the
electrical outlet
Risk of injury to children!
Follow these precautions to prevent the TV from tipping over and possibly injuring children:
• Never place the TV on a surface covered with a cloth or other removable material.
• Make sure that no part of the TV protrudes beyond the edge of the mounting surface.
• Never place the TV on tall furniture, such as a bookcase, without anchoring the furniture and theTV to the
wall or a suitable support.
Smart_TV_24_32_40_43_50_cz_sk_de_en.indb 5Smart_TV_24_32_40_43_50_cz_sk_de_en.indb 5 19.08.2020 17:19:1419.08.2020 17:19:14

English
English
6
7
CONNECTING EXTERNAL DEVICES
DVD Set-top box
AV input
Connection to HDMI input
USB connection
Antenna connection
Connection of the Ethernet cable
to the RJ45 connector
AV input
AV output
TV LOCATION AND CONNECTION
Positioning
Place the TV on a solid, stable surface that can support its weight.
To prevent damage, do not place the TV near water or heat sources
(light sources, candles or heaters) or cover the ventilation holes on
the back of the TV.
Antenna and power connection
aConnect a cable from a terrestrial or common antenna,
cable TV and / or satellite dish to the appropriate sockets on the
back of the TV.
bPlug the TV's power cord into a 100-240V AC outlet;
50/60 Hz.
Turning on the TV
cTo switch on the TV from standby, press the appropriate
button on the TV or remote control. The color of the indicator
light (LED) on the TV changes from red to green.
Smart_TV_24_32_40_43_50_cz_sk_de_en.indb 7Smart_TV_24_32_40_43_50_cz_sk_de_en.indb 7 19.08.2020 17:19:1519.08.2020 17:19:15

English
English
8
9
REMOTE CONTROLLER
Inserting the batteries
The battery door is located on the back of the remote control. Slide it down
to open it. Insert two 1.5 V AAA batteries into the battery compartment.
Observe their correct polarity as marked at the bottom of the controller.
Do not mix old and new batteries or batteries of dierent type. Replace the
battery compartment cover and slide it until the latch clicks.
ATTENTION! The manufacturer is not liable for damage caused by leaking
batteries!
Using the remote control
The remote control is used to control all the functions of your TV.
For proper operation, point the remote control at the remote control sensor
located next to the indicator light (LED) on the front panel of the TV.
Description of remote control buttons
1 1(power button) turns the TV on or o from or into stanby mode.
2 Mute the sound (indicated by a pictogram on the screen).
3 0–9 buttons for numeric selection (e.g. channels).
4 Electronic program guide. (EPG)
5 Teletext. (TXT)
6 Switching signal inputs.
7 Display of the home page menu.
8 Increases volume
9 Lowers volume
10 Gradual switching (stepping) TV programs upwards
11 Gradual switching (stepping) TV programs downwards.
12 Enter the system menu with TV settings
13 Displays information about the program, le, signal or input being
watched
14 Conrming selection; display of the toolbar with overview and
editing of programs
15 Cursor button to select menu items
16 Cursor button to select menu items and change their settings
17 Return to the previous menu / up a level
18 Exit a menu, end an active service or function
19 Direct access to Netix
20 Direct access to YouTube server
21 Direct access to the NetRange application store
22 Direct access to the storage medium connected to the USB input
23 Colored buttons (red, green, yellow and blue) for various functions
as described in the respective applications.
24 Fast reverse playback in USB player mode
25 Fast forward playback in USB player mode
26 Play and pause in USB player mode
27 Button without function
28 Stops playback / display in USB player mode
29 Selection of the soundtrack for multichannel broadcasts
A
C
D
H
L
Q
S
U
W
X
wk
E
M
R
T
S
Y
wl
B
F
G
I
J
K
NO
P
wj
wj
Smart_TV_24_32_40_43_50_cz_sk_de_en.indb 9Smart_TV_24_32_40_43_50_cz_sk_de_en.indb 9 19.08.2020 17:19:1619.08.2020 17:19:16

English
English
10
11
bB
TV OPERATION
First setup
Menu language selection
When you turn on the TV for the rst time, the initial setup menu starts up. It will guide you step by step
through the selection of the country, language, internet connection and other parameters, including tuning
TV programs.
1. Use vV buttons to select the required OSD (On Screen Display) menu and conrm by pressing OK.
2. A page appears with information about data collection and rmware updates. Using vV buttons select
the required option:
VIEW ADDITIONAL DETAILS
Displays more details about collecting data and updating rmware from the Internet.
ACCEPT
Accept all agreements and agree to automatically download rmware updates.
Smart_TV_24_32_40_43_50_cz_sk_de_en.indb 10Smart_TV_24_32_40_43_50_cz_sk_de_en.indb 10 19.08.2020 17:19:1619.08.2020 17:19:16

English
English
10
11
3. If you select VIEW ADDITIONAL DETAILS, detailed information on data collection and rmware download
is displayed. You can move up and down iin the text of the agreement using the vV buttons up and
down. When you reach the end, you can use vV buttons to select and conrm by pressing OK one of the
following options:
ACCEPT ALL
Accept all agreements and agree to automatically download rmware updates from the Internet.
ACCEPT AUTOMATIC UPDATES
Accept all agreements and agree to a possible rmware update via the Internet manually.
ACCEPT USAGE INFORMATION COLLECTION
Once approved, vendors will be able to collect some non-personal information about users.
DECLINE ALL
Reject all agreements and disable rmware updates over the Internet.
4. Use vV buttons to select the country where you will operate the TV. Press OK to conrm the selection.
Smart_TV_24_32_40_43_50_cz_sk_de_en.indb 11Smart_TV_24_32_40_43_50_cz_sk_de_en.indb 11 19.08.2020 17:19:1719.08.2020 17:19:17

English
English
12
13
Connection to internet
There are two options to connect the TV to a data network and thus to the Internet. Either wirelessly via Wi-Fi,
or by cable directly to the LAN router. Use the cable connection if it is possible.This avoids the problems caused
by interference or outages that can occur with a Wi-Fi wireless connection.
Wi-Fi
1. The TV automatically searches for and displays a list of names / identiers (SSIDs) of available Wi-Fi
networks. Use vor Vto select the networks to wchich you want to connect and press the OK button.
2. Use bvV Band OK buttons enter the network password and conrm it by pressing ENTER. When the
connection is successful, the message Successfully completed appears, if not Error appears.
Ethernet cable
Connect the Ethernet cable to LAN RJ45 connector on the back of the TV, selectt Ethernet cable, press OK and
select the Connect option. If the the connection is successful, the message Successfully compketed appears,
if not Error appears.
Skip the internet connection
1. If you do not want to connect to a data network and internet, select and conrmthe option Skip.
2. If you still want to go back and connect to the network, select the option Connect to network. Conrm
Skip again to omit the network settings. The signal source selection and TV tuning will follow.
Log in to your Netix account
If you want to log in to the Netix service conrm by pressingOK the selection Start Netix. You will then be
prompted to log in to your Netix account. If you do not have an account yet, you can create one now.
If you want for now to skip the Netix log in, select the option Skip. The signal source selection and tuning of
the TV will follow.
If you connected to Netixu press EXIT to end the service. To continue the initial TV setup select the signal
input, then press and select item in the menu TV programs. Select the item Automatic tuning for
automatic programs tuning.
TV tuning
If you selected Skip instead of log in to Netix, selection of signal source and program tuning will follow. If you
are watching TV through a set-top box, you can skip this section by selecting the correct HDMI input to which
the set-top box is connected.
Smart_TV_24_32_40_43_50_cz_sk_de_en.indb 12Smart_TV_24_32_40_43_50_cz_sk_de_en.indb 12 19.08.2020 17:19:1719.08.2020 17:19:17

English
English
12
13
Receiving DVB-T/T2
1. The Signal source menu appears on the screen. Use vV to select TV and press OK.
2. On the digital TV signal modulation selection page use vV buttons to select the item DVB-T.
3. The TV will now start searching for all available TV channels. The whole process can take several minutes.
The progress of tuning is indicated by a scale below which the number of found programs is displayed.
Smart_TV_24_32_40_43_50_cz_sk_de_en.indb 13Smart_TV_24_32_40_43_50_cz_sk_de_en.indb 13 19.08.2020 17:19:1819.08.2020 17:19:18

English
English
14
15
4. To skip the digital TV tuning (DTV), press OK and conrm by pressing OK when asked if you really want to
cancel tuning.
5. After tuning the entire range, your receiver is ready to watch TV programs.
Receiving DVB-S/S2
1. The Signal source menu appears on the screen. Use vV to select TV and press OK.
2. On the digital TV signal modulation page use vV buttons to select the item DVB-S.
3. Window Automatic tuning appears. To select parameters use the buttons bvV B. Start tuning by
conrming the item Scan.
Satellite
Select the desired satellite according to the name and position in orbit.
Transponder
Selects a transponder with the appropriate frequency.
Coding
Select if you want to search for Free + encoded / Encoded / Free programs.
Type of service
Select whether to search for DTV+radio / Radio / DTV programs.
Network search
Turn on this function if you want to download the program list from the NIT table broadcast from the satellite
by the provider. The option is available if Quick scan is selected in Scan mode .
Scan mode
Select whether the receiver should tune through the entire frequency band (Blind scan) or tune only programs
on frequencies preset on TV (Quick scan).
Search
4. The TV starts searching for all available TV channels. The whole process can take several minutes. The
progress of tuning is indicated by a scale below which the number of found programs is displayed.
5. If you want to skip the DTV scanning, press OK and conrm by pressing OK when asked if you really want
to abort tuning.
6. After tuning the entire range, your receiver is ready to watch TV programs.
Receiving DVB-C
1. The Signal source menu appears on the screen. Use vV to select TV and press OK.
Smart_TV_24_32_40_43_50_cz_sk_de_en.indb 14Smart_TV_24_32_40_43_50_cz_sk_de_en.indb 14 19.08.2020 17:19:1819.08.2020 17:19:18

English
English
14
15
2. On the digital TV signal modulation selection page use vV to select the item DVB-C.
3. The TV will now start searching for all available TV channels. The whole process can take several minutes.
The progress of tuning is indicated by a scale below which the number of found programs is displayed.
4. If you want to skip the DTV scanning, press OK and conrm by pressing OK when asked if you really want
to abort tuning.
5. After tuning the entire range, your receiver is ready to watch TV programs.
TV functions
Home page
1. Press the button to display the TV control menu (OSD) home page.
2. Use vV buttons to switch between sections Applications, NETFLIX, Source and Setting.
3. Use bBbuttons to select the required application, signal source or setting. Press OK to conrm selection.
Signal source selection
1. Press SOURCE on TV or on remote control to display selection bar of the input sources.
2. Use bBbuttons to select the required input. DVB-T / DVB-S / DVB-C / AV / HDMI1 / HDMI2 / HDMI3 / USB
/ Home.
3. Press OK to conrm selection. If you do not press OK , the TV nestisknete, the TV automatically switches to
the selected input within a few seconds.
Picture
It allows you to set all parameters and preferences related to the image.
Smart_TV_24_32_40_43_50_cz_sk_de_en.indb 15Smart_TV_24_32_40_43_50_cz_sk_de_en.indb 15 19.08.2020 17:19:1819.08.2020 17:19:18

English
English
16
17
1. Press to enter the main OSD menu.
2. Press OK to conrm the rst item Picture.
3. Use vV buttons to select one of the picture setting options and press OK to conrm. Use bBbuttons to
change the setting of each parameter.
Display mode
It allows you to switch between the following picture modes: Standard / Film / User / Dynamic.
Contrast
It sets the dierences of brightness between the lightest and darkest areas of the picture (only in the User
mode).
Brightness
Increases or decreases the level of white in the picture (only in the User mode).
Colour
Sets the color saturation of the picture (only in the User mode.
Sharpness
Sets the sharpness of the picture (only in the User mode).
Colour Tint (NTSC)
Tone balance between red and green (only when receiving an analog TV signal in the NTSC color system in
User mode).
Backlight
Setting the backlight intensity of the TV display. It aects the brightness and contrast of the picture and the
power consumption of the TV.
Colour temperature
Select one of the presets of the picture color temperature: Standard / Warm / Cold.
Aspect Ratio
Allows you to adjust the aspect ratio of the image: 16:9 / Film / Subtitles / Auto / 4:3. Depending on the
selected signal source, dierent aspect ratio settings are available.
Noise reduction
Selection of the picture noise reduction ratio: O / Low / Medium / High / Auto.
Smart_TV_24_32_40_43_50_cz_sk_de_en.indb 16Smart_TV_24_32_40_43_50_cz_sk_de_en.indb 16 19.08.2020 17:19:1819.08.2020 17:19:18

English
English
16
17
Press BACK to return to the previous menu. Press EXIT to exit menu.
Sound
Allows you to set all parameters and preferences related to the sound.
1. Press to enter the main OSD menu.
2. Use vV buttons to select the item Sound and conrm by pressing OK.
3. Use vV buttons to select one of the options of sound setting and press OK to conrm. Use bBbuttons
to change the setting of each parameter.
Audio mode
This function is available when surround sound is turned o. Use bBbuttons to sele3ct one of the sound
presets: Standard / Music / Film / Sport / User.
Equalizer
This function is available only in the User mode. Allows you to change the color of the sound by increasing or
decreasing the levels from 0 to 100 at 120 Hz / 500 Hz / 1.5 kHz / 5 kHz / 10 kHz.
Balance
Volume balance between left and right speaker.
Automatic volume limitation
When turned on, the volume will automatically be kept constant so that, for example, commercials are not
louder than other programs.
Surround Sound
It creates virtual surround sound through the TV's speakers, which is characterized by rich bass, clear treble
and clear dialogues.
Audio Description (only in the DTV mode)
Audio Description (AD) is a form of narration describing the scene depicted for the blind and visually impaired.
This special audio channel can be broadcast in parallel with the main audio.
Set to "O" for normal sound reproduction.
Set to "On" for audio reproduction, including audio description, if available for the broadcast. You can adjust
the volume of the audio description In the item AD volume relative to the main soundtrack. The availability of
the Audio Description audio track is usually indicated in the program overviews, and can also be found in the
program guide (EPG) of this TV.
Smart_TV_24_32_40_43_50_cz_sk_de_en.indb 17Smart_TV_24_32_40_43_50_cz_sk_de_en.indb 17 19.08.2020 17:19:1819.08.2020 17:19:18

English
English
18
19
Digital out
Selecting the surround audio encoding format on the digital audio output: Auto / Dolby DD / Dolby DD+ /
PCM.
Audio mode (only in the DTV mode).
Switching audio output for the disabled: Normal / Deaf / Vis. impaired.
Audio delay
Independent audio delay setting from 0 to 250 ms on digital output, speakers and HDMI output.
Press BACK to return to the previous menu. Press EXIT to exit menu.
Settings
In this menu, you can set various expanded functions and parameters of the TV.
1. Press to enter the main OSD menu.
2. Use vV buttons to select the item Settings and conrm by pressing OK.
3. Use vV buttons to select one of the options and conrm it by pressing OK. Use bBbuttons to change
the setting of each parameter.
Language
OSD Language
Select the language in which the OSD menu is displayed.
Audio language
Allows you to select the desired audio language. Digital TV broadcast oers this option if multiple language
tracks are broadcast.
Press the OK button to enter the submenu and select the primary and secondary audio language.
Subtitle language
Allows you turn on subtitles and select the desired language. Digital TV broadcasts oer this option if subtitles
are broadcast. Press OK to enter the submenu where you can turn o and on the subtitles, select their primary
and seconday language and turn o or on the subtitles for hearing impaired.
OSD display time
To set the length of time the OSD menus appear on the screen: 5 seconds / 10 seconds / 15 seconds /
Permanently. If you select Permanently, the menu continues to be displayed until you close it by pressing
EXIT.
Smart_TV_24_32_40_43_50_cz_sk_de_en.indb 18Smart_TV_24_32_40_43_50_cz_sk_de_en.indb 18 19.08.2020 17:19:1919.08.2020 17:19:19

English
English
18
19
HbbTV
HbbTV (Hybrid Broadcast Broadband TV) is a service oered by some providers on some digital television
programs. This function combines TV broadcasting with broadband internet. To use HbbTV, make sure the TV
is connected to the Internet and the HbbTV function is turned on there.
HDMI Setup
For HDMI interface to function properly, all devices and cables used must be HDMI-CEC compliant and the
correct inputs, usually HDMI / ARC, must be used for connection.
HDMI - CEC
Allows you to control external devices (set-top box, DVD player) connected via HDMI interface with the TV
remote control. The condition is that the devices must support the HDMI-CEC function. This function also
allows HDMI-CEC-enabled devices to control each other without user intervention.
HDMI - ARC
This function allows digital audio output from the TV to an external device (such as an AV receiver, audio
projector ...) connected to the HDMI - ARC socket. HDMI-CEC must rst be activated to enable this function.
Select O to turn o the audio feedback via the HDMI interface.
Auto power on
If the HDMI - CEC function is active, you can enable devices that support the CEC function together with the
TV to turn on automatically.
Automatic shut o
If the HDMI - CEC function is active, you can enable the automatic switch-o of devices that support the CEC
function together with the TV.
Time
Aut. synchronization
When automatic time synchronization is on, the date and time are set and synchronized automatically from
the broadcast TV signal. If you want to enter the date and time manually, turn o auto-synchronization.
Time
When the auto-synchronization function is o press OK to enter the menu for manual time and date setting.
Use then bvV Bbuttons to enter the current year, month, day, hour and minute.
O time
Allows you to set the time for the TV to turn o automatically. Press OK to open the submenu where you can
select the O / Once / Every day / Mo-Fr / Mo-Sat / Sat-Sun / Sunday mode and then enter the hour and
minute for turning o. The TV must have the time and date set before using this function.
Time On
Allows you to set the time for the TV to turn on automatically. Press OK to opent he submenu where you can
select O / Once / Every day / Mo-Fri / Mo-Sat / Sat-Sun / Sunday mode and then enter the hour and minute
for turning on. Then use the Signal source parameter to select at which input or tuner the TV is to be switched
on. The TV must have the time and date set before using this function.
Smart_TV_24_32_40_43_50_cz_sk_de_en.indb 19Smart_TV_24_32_40_43_50_cz_sk_de_en.indb 19 19.08.2020 17:19:1919.08.2020 17:19:19

English
English
20
21
Sleep timer
The sleep timer automatically switches theTV to standby after the selected time has elapsed.The TV must have
the time and date set before using this function. Use bBbuttons to select the time after which the TV should
turn o automatically: O / 10 min / 20 min / ... / 180 min / 240 min. The o time starts countdown as soon
as you make a selection
Aut. O
When this automatic sleep mode is active, the TV switches o to standby 4 hours after the last command you
used to control it. Before this auto-shutdown, a countdown alert will appear informing you of an impending
shutdown.
Time zone
The time of the TV can be adjusted to GMT (Greenwich Mean Time) by manually selecting the appropriate city
and thus the time zone.
Operating mode
Allows you to select the home mode (Homeí) for optimal energy eciency or for demo mode (Store), if you
want a stronger and clearer picture.
Reset
Clears all TV tunings and resets all TV settings to factory defaults.
Press BACK to return to the previous menu. Press EXIT to exit menu.
Lock
You must rst enter a numeric code before entering this menu. Enter the default code 0000 for the rst use.
You can then change the code as you wish in the item Change numeric code.
The number lock prevents unwanted retuning of the TV, changes in program layout and children watching
unsuitable programs. If the lock is on, you need to enter the appropriate numeric code to tune programs,
change the order and delete programs, set the LNB and reset the TV to factory settings.
1. Press to enter the main OSD menu.
2. Press vV buttons to select the menu Lock and press OK.
3. You will be prompted to enter a four-digit code to enter the menu. Use the number buttons 0–9 on the
remote control for selection. The default code is 0000.
Smart_TV_24_32_40_43_50_cz_sk_de_en.indb 20Smart_TV_24_32_40_43_50_cz_sk_de_en.indb 20 19.08.2020 17:19:1919.08.2020 17:19:19