Edge-Core ECS4510 Series User manual

Installation Guide
www.edge-core.com
ECS4510 Series
28/52-Port Layer 2+
Stackable GE Switch

Installation Guide
ECS4510-28T Stackable GE Switch
Layer 2+ Stackable Gigabit Ethernet Switch,
with 24 10/100/1000BASE-T (RJ-45) Ports,
2 10-Gigabit SFP+ Ports,
and 1 10-Gigabit SFP+ Extender Module Slot
ECS4510-28P Stackable GE PoE Switch
Layer 2+ Stackable Gigabit Ethernet Switch,
with 24 10/100/1000BASE-T (RJ-45) PoE Ports,
2 10-Gigabit SFP+ Ports,
and 1 10-Gigabit SFP+ Extender Module Slot
ECS4510-28F Stackable GE Switch
Layer 2+ Gigabit Ethernet Switch,
with 22 100/1000BASE-X SFP Slots,
2 Combination Gigabit (RJ-45/SFP) Ports,
2 10-Gigabit SFP+ Ports,
and 1 10-Gigabit SFP+ Extender Module Slot
ECS4510-28F-DC Stackable GE Switch
Layer 2+ Gigabit Ethernet Switch,
with 22 100/1000BASE-X SFP Slots,
2 Combination Gigabit (RJ-45/SFP) Ports,
2 10-Gigabit SFP+ Ports,
and 1 10-Gigabit SFP+ Extender Module Slot
ECS4510-52T Stackable GE Switch
Layer 2+ Gigabit Ethernet Switch,
with 48 10/100/1000BASE-T (RJ-45) Ports,
2 10-Gigabit SFP+ Ports,
and 1 10-Gigabit SFP+ Extender Module Slot
ECS4510-52P Stackable GE PoE Switch
Layer 2+ Gigabit Ethernet Switch,
with 48 10/100/1000BASE-T (RJ-45) PoE Ports,
2 10-Gigabit SFP+ Ports,
and 1 10-Gigabit SFP+ Extender Module Slot
E072015-CS
150200000990A R04

– 3 –
How to Use This Guide
This guide includes detailed information on the switch hardware, including
network ports, power, cabling requirements, as well as plug-in modules and
transceivers. This guide also provides general installation guidelines and
recommended procedures. To deploy this switch effectively and ensure trouble-
free operation it is recommended to first read the relevant sections in this guide so
that you are familiar with all its hardware components.
Who Should Read This
Guide?
This guide is for network administrators and support personnel that install, operate,
and maintain network equipment. The guide assumes a basic working knowledge
of LANs (Local Area Networks) and can be read by either those that are new to
network equipment, or those with more experience.
How This Guide is
Organized
The organization of this guide is based on the switch’s main hardware components.
Each chapter includes information about a specific component with relevant
specifications and installation procedures. A switch overview section is also
provided.
For Users New to Switches — If you are new to network switches, it is
recommended that you first read all chapters in this guide before installing the
switch.
For Experienced Users — If you are already familiar with installing and operating
network switches, the Switch Description and Installation Overview chapters
provide you with enough information to install the switch. Other chapters can be
left for reference, when needed.
The guide includes these chapters:
◆Chapter 1 - Switch Description — Includes a switch overview, key component
identification and key technical specifications.
◆Chapter 2 - Installation Overview — Includes details of the package contents
and an outline of switch installation tasks.
◆Chapter 3 - Switch Chassis — Includes switch chassis rack installaion, and
system cooling requirements.
◆Chapter 4 - Power and Grounding — Includes information on AC power
requirements, switch grounding, and powering on the switch.

How to Use This Guide
– 4 –
◆Chapter 5 - Port Connections — Includes information on network interfaces,
installing optional transceivers, and cabling specifications.
◆Chapter 6 - Switch Management — Connecting to the switch for management,
and information on the system status LEDs.
◆Appendix A - Troubleshooting — Information for troubleshooting switch
installation and operation.
Related
Documentation
This guide focuses on switch hardware and installation, it does not cover software
configuration of the switch. For specific information on how to operate and use the
management functions of the switch, see the following guides:
Web Management Guide
CLI Reference Guide
For all safety information and regulatory statements, see the following documents:
Quick Start Guide
Safety and Regulatory Information
Conventions The following conventions are used throughout this guide to show information:
Note: Emphasizes important information or calls your attention to related features
or instructions.
Caution: Alerts you to a potential hazard that could cause loss of data, or damage
the system or equipment.
Warning: Alerts you to a potential hazard that could cause personal injury.
Revision History This section summarizes the changes in each revision of this guide.
July 2015 Revision
This is the fourth revision of this guide. It includes the following change:
◆Updated graphics for 52-port switches.
April 2015 Revision
This is the third revision of this guide. It includes the following change:

How to Use This Guide
– 5 –
◆Updated stacking information.
◆Modified Diag LED states.
March 2015 Revision
This is the second revision of this guide. It includes the following change:
◆Updated the part number information.
September 2014 Revision Revision
This is the first revision of this guide.

– 6 –
Contents
How to Use This Guide 3
Contents 6
Figures 8
Tables 10
1 Switch Description 11
Overview 11
Power-over-Ethernet 11
Key Hardware Components 12
Key Technical Specifications 15
2 Installation Overview 17
Package Contents 17
Switch Installation Tasks 18
3 Switch Chassis 23
General Installation Guidelines 23
Switch Cooling Requirements 24
Rack Cooling 25
How to Install the Switch in a Rack 25
Rack-Mounting Items 26
Rack-Mount Procedure 26
How to Install the Switch on a Shelf or Desktop 27
Optional Media Expansion Module 28
How to Install an Optional Media Expansion Module 28
4 Power and Grounding 30
AC Power Supply 30
DC Power Supply 31
Optional Redundant Power Supply 32

Contents
– 7 –
Grounding the Chassis 32
How to Connect to AC Power 33
How to Connect to DC Power 34
5 Port Connections 37
Cable Labeling and Connection Records 38
Understanding the Port Status LEDs 38
How to Install an SFP/SFP+ Transceiver 39
How to Connect to Twisted-Pair Copper Ports 40
Copper Cabling Guidelines 41
10/100BASE-TX Pin Assignments 41
1000BASE-T Assignments 42
Power-over-Ethernet 43
Connection Procedure 44
How to Connect to SFP/SFP+ Fiber Optic Ports 45
Connection Procedure 46
Making 10 Gbps DAC Connections 47
Connecting Switches in a Stack 47
6 Switch Management 49
Understanding the System Status LEDs 50
How to Connect to the Console Port 51
A Troubleshooting 54
Diagnosing LED Indicators 54
System Self-Diagnostic Test Failure 54
Power and Cooling Problems 55
Installation 55
In-Band Access 55
Index 56

– 8 –
Figures
Figure 1: Switch Front Panels 12
Figure 2: Rear Panel 14
Figure 3: Installing the Switch in a Rack 18
Figure 4: Connecting AC Power 19
Figure 5: Connecting DC Power 19
Figure 6: System LEDs 20
Figure 7: Console Port 21
Figure 8: Making a Connection to an RJ-45 Port 22
Figure 9: Switch Cooling 24
Figure 10: Switch Cooling (ECS4510-28T) 24
Figure 11: Attaching the Brackets 26
Figure 12: Installing the Switch in a Rack 27
Figure 13: Attaching the Adhesive Feet 27
Figure 14: Dual-Port 10G SFP+ Module 28
Figure 15: Installing an Optional Module 29
Figure 16: AC Power Supply Socket 30
Figure 17: DC Terminal 31
Figure 18: Redundant Power Supply Connector 32
Figure 19: Grounding Terminal 32
Figure 20: AC Power Cord and Power Socket 33
Figure 21: DC Plug Connections 35
Figure 22: Port Status LEDs 38
Figure 23: Inserting an SFP/SFP+ Transceiver into a Slot 40
Figure 24: RJ-45 Connector 41
Figure 25: Making Twisted-Pair Connections 44
Figure 26: Making a Connection to an SFP+ Port 46
Figure 27: Making Stack Connections 48
Figure 28: System Status LEDs 50
Figure 29: Console Port 51

Figures
– 9 –
Figure 30: Console Port Connection 52

– 10 –
Tables
Table 1: Key Technical Specifications 15
Table 2: AC Power Supply Specifications 31
Table 3: DC Power Supply Specifications 31
Table 4: RPS Specifications 32
Table 5: Port Status LEDs 39
Table 6: Maximum Twisted-Pair Copper Cable Lengths 40
Table 7: 10/100BASE-TX MDI and MDI-X Port Pinouts 41
Table 8: 1000BASE-T MDI and MDI-X Port Pinouts 42
Table 9: Maximum 10 Gigabit Ethernet Fiber Cable Lengths 45
Table 10: Maximum Gigabit Ethernet Fiber Cable Lengths 45
Table 11: System Status LEDs 50
Table 12: Console Cable Wiring 51
Table 13: Troubleshooting Chart 54

– 11 –
1Switch Description
This chapter includes these sections:
◆“Overview” on page 11
◆“Key Technical Specifications” on page 15
Overview
The ECS4510-28T, ECS4510-28P, ECS4510-52T, and ECS4510-52P are Gigabit
Ethernet Layer 2+ stackable switches with 24/48 10/100/1000BASE-T ports, two 10-
Gigabit (10G) Small Form Factor Pluggable Plus (SFP+) transceiver slots. The
ECS4510-28F and ECS4510-28F-DC are Layer 2 + switches that provid 22 SFP 1G
transceiver slots, two combination Gigabit RJ-45/SFP ports, and two 10G SFP+ slots.
The ECS4510-28P and ECS4510-52P front-panel ports also support Power-over-
Ethernet Plus (PoE+).
All switches also provide one rear-panel slot for a dual-port 10G hot-swappable
expansion module.
The switches include an SNMP-based management agent, which provides both in-
band and out-of-band access for managing the switch. Further, the switches
support both web and CLI-based configuration.
These switches include built-in stacking ports that enable units to be connected
together through a 40 Gbps stack backplane. The switch stack can be managed
from a master unit using a single IP address.
Power-over-Ethernet All of the 10/100/1000 Mbps ports on the ECS4510-28P and ECS4510-52P support
the IEEE 802.3at Power-over-Ethernet Plus (PoE+) standard that enables DC power
to be supplied to attached devices using wires in the connecting Ethernet cable.

Chapter 1 | Switch Description
Overview
– 12 –
Key Hardware
Components
This manual describes each specific component, or related components, together
with their installation requirements and procedures in each chapter. To understand
each component in detail, refer to the relevant section.
Figure 1: Switch Front Panels
10/100/1000BASE-T RJ-45 Ports
The switch contains 24/48 RJ-45 ports that support 10/100/1000BASE-T copper
links to other devices. The ports on the ECS4510-28P and ECS4510-52P also
support PoE+ connections. For more information, see “How to Connect to Twisted-
Pair Copper Ports” on page 40.
87
12
3
6
5
4
9
10
ECS4510-28P
ECS4510-28F
ECS4510-52T
ECS4510-52P
ECS4510-28T
ECS4510-28F-DC
System LEDs 100/1000BASE-X SFP Slots
1000BASE-T RJ-45 Port LEDs 1000BASE-T RJ-45 Ports
10G SFP+ Port LEDs Expansion Module Port LEDs
Combination Gigabit RJ-45/SFP Ports RJ-45 Console Port
10G SFP+ Slots / Stacking Ports USB Port
1
6
2
7
3
8
4
9
5
10

Chapter 1 | Switch Description
Overview
– 13 –
10G SFP+ Slots / Stacking Ports
The switch contains two 10G SFP+ transceiver slots that operate at 10 Gbps full
duplex. For more information, see “How to Connect to SFP/SFP+ Fiber Optic Ports”
on page 45.
The SFP+ ports can also be used as stacking ports, providing a 40 Gbps stack
backplane connection between switches. For more information, see “Connecting
Switches in a Stack” on page 47.
Combination Gigabit RJ-45/SFP Ports
The ECS4510-28F switch contains two Gigabit combination ports. You can connect
to either an RJ-45 port or an SFP transceiver (purchased separately).
◆ SFP Slots — The SFP transceiver slots operate at 100 Mbps or 1 Gbps full
duplex. For more information, see “How to Connect to SFP/SFP+ Fiber Optic
Ports” on page 45.
◆ 1000BASE-T RJ-45 Ports — The RJ-45 ports support 10/100/1000BASE-T
copper links to other devices. For more information, see “How to Connect to
Twisted-Pair Copper Ports” on page 40.
100/1000BASE-X SFP Slots
The ECS4510-28F and ECS4510-28F-DC switches contain 22 1G SFP transceiver slots
that operate at 100 Mbps or 1Gbps full duplex. For more information, see “How to
Connect to SFP/SFP+ Fiber Optic Ports” on page 45.
System LEDs
For information on system status LED indicators, see “Understanding the System
Status LEDs” on page 50.
Port LEDs
For information on port status LED indicators, see “Understanding the Port Status
LEDs” on page 38.
USB Port
Reserved for future use.
Console Port
The RJ-45 connector on the front panel labeled “Console” provides an out-of-band
serial connection to a terminal or a PC running terminal emulation software. The
port can be used for performing switch monitoring and configuration. For more
information, see “How to Connect to the Console Port” on page 51.

Chapter 1 | Switch Description
Overview
– 14 –
Figure 2: Rear Panel
Grounding Terminal
The switch includes a grounding terminal that must be connected to a ground
source that provides local earth potential. For more information, see “Grounding
the Chassis” on page 32.
RPS Connector
The switch supports an optional Redundant Power Supply (RPS), that can supply
power to the switch in the event the internal power supply fails. For more
information, see “DC Power Supply” on page 31.
Expansion Module Slot
The switch includes one slot on the rear panel for a hot-swappable dual-port
10GBASE module. For more information, see “Optional Media Expansion Module”
on page 28.
AC Power Socket
The switch requires a 100-240 VAC, 50-60 Hz AC power source. For more
information on the switch power input, how to connect it, and how to power-on
the switch, see “How to Connect to AC Power” on page 33.
DC Power Socket
The switch requires a 36 to 75 VDC, 3.82 A power source. For more information on
the switch power input, how to connect it, and how to power-on the switch, see
“How to Connect to DC Power” on page 34
2
1
3
DC Model
AC Models
4
5
Grounding Terminal Expansion Module Slot
RPS Connector DC Power Socket (ECS4510-28F-DC only)
AC Power Socket
1
4
2
5
3

Chapter 1 | Switch Description
Key Technical Specifications
– 15 –
Key Technical Specifications
The following table contains key system specifications for the switch.
Table 1: Key Technical Specifications
Item Specification
Ports ECS4510-28T/P: 24 1000BASE-T RJ-45 ports with Auto-negotiation
ECS4510-52T/P: 48 1000BASE-T RJ-45 ports with Auto-negotiation
ECS4510-28F/F-DC: 22 100/1000BASE-X SFP slots
ECS4510-28F/F-DC: 2 Combination 1G RJ-45/SFP ports
2 10G SFP+ transceiver slots (for uplink or stacking)
1 expansion module slot (supporting dual-port 10G SFP+ module)
Network Interface ECS4510-28T/P:
Ports 1~24: RJ-45 connector, auto MDI/X
Ports 25~26: 10G SFP+ transceivers
Ports 27~28: Dual-port module supporting 10G SFP+ transceivers
ECS4510-52T/P:
Ports 1~48: RJ-45 connector, auto MDI/X
Ports 49~50: 10G SFP+ transceivers
Ports 51~52: Dual-port module supporting 10G SFP+ transceivers
ECS4510-28F/F-DC:
Ports 1~22: 1G SFP transceivers
Ports 23~24: RJ-45 connector, auto MDI/X or 1G SFP transceivers
Ports 25~26: 10G SFP+ transceivers
Ports 27~28: Dual-port module supporting 10G SFP+ transceivers
Buffer Architecture 1.5 Mbytes
Aggregate Bandwidth ECS4510-28T/P/F/F-DC: 128 Gbps
ECS4510-52T/P: 176 Gbps
Switching Database 16K MAC address entries
1024 static MAC addresses
32 IP interfaces
1023 multicast groups
AC Input Power ECS4510-28T: 100 to 240 V, 50-60 Hz, 1.5 A
ECS4510-28P: 100 to 240 V, 50-60 Hz, 10 A
ECS4510-28F: 100 to 240 V, 50-60 Hz, 2 A
ECS4510-52T: 100 to 240 V, 50-60 Hz, 2 A
ECS4510-52P: 100 to 127 V, 12 A ; 200 to 240 V , 6 A , 50-60 Hz
DC Input Power ECS4510-28F-DC: 36 to 75 V, 3.82 A
Power Consumption* ECS4510-28T: 35 W max. (with expansion module)
ECS4510-28P: 515 W max. (with expansion module and PoE enabled)
ECS4510-28P Max. PoE Load: 410 W
ECS4510-28F/F-DC: 50 W max. (with expansion module)
ECS4510-52T: 70 W max. (with expansion module)
ECS4510-52P: 960 W max. (with expansion module and PoE enabled)
The ECS4510-52P maximum power consumption is reduced to 780 W
when the device is powered from a connected RPS.

Chapter 1 | Switch Description
Key Technical Specifications
– 16 –
* Maximum power consumption values are measured under a 100 percent loading test and
should be used as estimates for planning purposes.
Maximum Current ECS4510-28T: 1.1 A @ 110 VAC (with expansion module)
ECS4510-28P: 4.56 A @ 110 VAC (with expansion module and PoE enabled)
ECS4510-28F: 0.51 A @ 100 VAC (with expansion module)
ECS4510-52T: 0.58 A @ 110 VAC (with expansion module)
ECS4510-52P: 7.92A @110 VAC (with expansion module and PoE enabled)
Weight ECS4510-28T: 3.7 kg (8.16 lb)
ECS4510-28P: 4.95 kg (10.91 lb)
ECS4510-28F: 3.8 kg (8.38 lb)
ECS4510-28F-DC: 3.8 kg (8.38 lb)
ECS4510-52T: 4.8 kg (10.52 lb)
ECS4510-52P: 6.58 kg (14.51 lb)
Size (W x D x H) ECS4510-28T/P/F/F-DC: 44.0 x 31.5 x 4.4 cm (17.3 x 12.4 x 1.7 in.)
ECS4510-52T/P: 44.0 x 39.1 x 4.4 cm (17.3 x 15.4 x 1.7 in.)
Temperature Operating: 0° C to 45° C (32° F to 113° F)
Storage: -40° C to 70° C (-40° F to 158° F)
Humidity Operating: 10% to 90% (non-condensing)
Forwarding Mode Store-and-forward
Throughput Wire speed
Flow Control Full Duplex: IEEE 802.3x
Half Duplex: Back pressure
Table 1: Key Technical Specifications (Continued)
Item Specification

– 17 –
2Installation Overview
This chapter includes these sections:
◆“Package Contents” on page 17
◆“Switch Installation Tasks” on page 18
Package Contents
After unpacking the switch, check the contents to be sure you have received all the
components.
◆ECS4510-28T, ECS4510-28P, ECS4510-28F, ECS4510-28F-DC, ECS4510-52T, or
ECS4510-52P Switch
◆AC Power Cord—either US, Continental Europe or UK
◆DC connector plug (ECS4510-28F-DC only)
◆Rack Mounting Kit — includes two brackets and eight screws
◆Four adhesive foot pads
◆Console cable — RJ-45 to DB-9
◆Documentation — Quick Start Guide and Regulatory and Safety Information
◆Documentation CD — includes Installation Guide, Web Management Guide, and
CLI Reference Guide.

Chapter 2 | Installation Overview
Switch Installation Tasks
– 18 –
Switch Installation Tasks
Follow these tasks to install the switch in your network. For full details on each task,
go to the relevant chapter or section by clicking on the link.
Caution: Before installing your switch, first review all the safety statements and
guidelines in the Regulatory and Safety Information document.
Unpack Package and Check Contents
Unpack your switch and check the package contents to be sure you have received
all the items. See “Package Contents” on page 17.
Install the Chassis
The switch is designed to be installed in a standard 19-inch equipment rack. Plan
your rack installation and install the switch chassis in the rack. Be sure to take into
account switch cooling requirements.
Go to the chapter “Switch Chassis”.
Figure 3: Installing the Switch in a Rack
Task 1
Task 2
Attach the brackets to the switch.
Use the screws supplied with the rack to secure the switch in the rack.
2
1
1
2

Chapter 2 | Installation Overview
Switch Installation Tasks
– 19 –
Ground the Switch and Power On
Connect a ground wire to the switch, and then use a AC power cable to connect the
switch to a AC power source..
Go to the chapter “Power and Grounding”.
Figure 4: Connecting AC Power
Connect DC Power
Connect a ground wire to the switch, and then use a DC power cable to connect the
switch to a DC power source.
Go to the chapter “Power and Grounding”.
Figure 5: Connecting DC Power
Task 3
Connect a grounding wire to the grounding terminal..
Connect an external AC power source to the AC power socket of the switch using the supplied
AC power cord.
Connect a grounding wire to the grounding terminal..
Connect an external DC power source to the DC power socket of the switch using a DC power
cable.
1
2
1
2
1
2
1
2

Chapter 2 | Installation Overview
Switch Installation Tasks
– 20 –
Verify Switch Operation
Verify basic switch operation by checking the system LEDs.
When operating normally, the Power and Diag LEDs should both be on green. If
either of these LEDs are on amber, see “Diagnosing LED Indicators” on page 54.
Go to the section “Understanding the System Status LEDs” on page 50.
Figure 6: System LEDs
Make Initial Configuration Changes
At this point, you may need to make a few basic switch configuration changes
before connecting to the network. It is suggested to connect to the switch console
port to perform this task.
The serial port’s configuration requirements are as follows: 115200 bps, 8
characters, no parity, one stop bit, 8 data bits, and no flow control.
You can log in to the command-line interface (CLI) using default settings: User
“admin” with the password “admin”.
Go to “How to Connect to the Console Port” on page 51
Task 4
System Status LEDs.
1
1
Task 5