Edge-Core AS6700-32X Instruction Manual

CLI Reference Guide
www.edge-core.com
10G/40G Top-of-Rack Switches
AS5700-54X
AS6700-32X
Software Release v1.1.166.154

CLI Reference Guide
AS5700-54X
54-Port 10G Ethernet Switch with
48 10GBASE SFP+ Ports,
6 40GBASE QSFP Ports,
2 Power Supply Units,
and 4 Fan Trays (4 Fans – F2B and B2F Airflow)
AS6700-32X
32-Port 40G Data Center Switch
with 20 40G QSFP+ Ports,
2 40G Expansion Slots,
2 Power Supply Units,
and 5 Fan Trays (5 Fans – F2B or B2F Airflow)
E032016/ST-R02
149100000198A

– 3 –
How to Use This Guide
This guide includes detailed information on the switch software, including how to
operate and use the management functions of the switch. To deploy this switch
effectively and ensure trouble-free operation, you should first read the relevant
sections in this guide so that you are familiar with all of its software features.
Who Should Read This
Guide?
This guide is for network administrators who are responsible for operating and
maintaining network equipment. The guide assumes a basic working knowledge of
LANs (Local Area Networks), the Internet Protocol (IP), and Simple Network
Management Protocol (SNMP).
How This Guide is
Organized
This guide describes the switch’s command line interface (CLI). For more detailed
information on the switch’s key features refer to the Administrator’s Guide.
The guide includes these sections:
◆Section I “Getting Started” — Includes information on connecting to the switch
and basic configuration procedures.
◆Section II “Command Line Interface” — Includes all management options
available through the CLI.
◆Section III “Appendices” — Includes information on troubleshooting switch
management access.
Related
Documentation
This guide focuses on switch software configuration through the CLI.
For information on how to manage the switch through the Web management
interface, see the following guide:
Web Management Guide
Note: For a general description of switch features, refer to “Introduction” in the
Web Management Guide.
For information on how to install the switch, see the following guide:
Installation Guide

How to Use This Guide
– 4 –
For all safety information and regulatory statements, see the following documents:
Quick Start Guide
Safety and Regulatory Information
Conventions The following conventions are used throughout this guide to show information:
Note: Emphasizes important information or calls your attention to related features
or instructions.
Caution: Alerts you to a potential hazard that could cause loss of data, or damage
the system or equipment.
Warning: Alerts you to a potential hazard that could cause personal injury.
Revision History This section summarizes the changes in each revision of this guide.
March 2016 Revision
This is the second version of this guide. This guide is valid for software release
v1.1.166.154. It contains the following changes:
October 2015 Revision
This is the first version of this guide. This guide is valid for software release
v1.1.0.152.
Table 1: Revision History
Description of Changes
Added:
Updated:
Deleted:

– 5 –
Contents
How to Use This Guide 3
Contents 5
Figures 43
Tables 45
Section I Getting Started 53
1 Initial Switch Configuration 55
Connecting to the Switch 55
Configuration Options 55
Connecting to the Console Port 56
Selecting Legacy or Hybrid Operation Mode 57
Logging Onto the Command Line Interface 57
Setting Passwords 58
Remote Connections (Network Interface or Craft Port) 58
Obtaining and Installing a License for the Network Ports 59
Configuring the Switch for Remote Management 61
Using the Service Port or Network Interface 61
Setting an IP Address 62
Enabling SNMP Management Access 67
Managing System Files 69
Upgrading the Operation Code 70
Saving or Restoring Configuration Settings 71
Configuring Automatic Installation of Operation Code and Configuration Settings
72
Downloading Operation Code from a File Server 72
Specifying a DHCP Client Identifier 75
Downloading a Configuration File Referenced by a DHCP Server 75

Contents
– 6 –
Setting the System Clock 77
Setting the Time Manually 78
Configuring SNTP 78
Configuring NTP 79
Section II Command Line Interface 81
2 Using the Command Line Interface 83
Accessing the CLI 83
Console Connection 83
Telnet Connection 83
Entering Commands 85
Keywords and Arguments 85
Minimum Abbreviation 85
Command Completion 85
Getting Help on Commands 86
Partial Keyword Lookup 87
Negating the Effect of Commands 88
Using Command History 88
Understanding Command Modes 88
Exec Commands 88
Configuration Commands 89
Command Line Processing 92
CLI Command Groups 93
3 General Commands 95
prompt 95
reload (Global Configuration) 96
enable 97
quit 98
show history 98
configure 99
disable 100
reload (Privileged Exec) 100
show reload 101

Contents
– 7 –
end 101
exit 101
4 System Management Commands 103
Device Designation 103
hostname 104
Banner Information 104
banner configure 105
banner configure company 106
banner configure dc-power-info 107
banner configure department 108
banner configure equipment-info 108
banner configure equipment-location 109
banner configure ip-lan 110
banner configure lp-number 110
banner configure manager-info 111
banner configure mux 112
banner configure note 112
show banner 113
System Status 113
location-led 114
show access-list tcam-utilization 115
show license file 116
show location-led status 117
show memory 117
show process cpu 117
show running-config 118
show startup-config 120
show system 120
show tech-support 122
show users 123
show version 123
show watchdog 124
watchdog software 124
Fan Control 125

Contents
– 8 –
fan-speed force-full 125
Frame Size 125
jumbo frame 126
File Management 126
General Commands 128
boot system 128
copy 129
delete 132
dir 133
onie 134
umount usbdisk 136
whichboot 136
Automatic Code Upgrade Commands 137
upgrade opcode auto 137
upgrade opcode path 138
upgrade opcode reload 139
show upgrade 140
TFTP Configuration Commands 140
ip tftp retry 140
ip tftp timeout 141
show ip tftp 141
Line 142
line 142
databits 143
exec-timeout 144
login 144
parity 145
password 146
password-thresh 147
silent-time 148
speed 148
stopbits 149
timeout login response 149
disconnect 150
terminal 151

Contents
– 9 –
show line 152
Event Logging 153
logging facility 153
logging history 154
logging host 155
logging on 155
logging trap 156
clear log 157
show log 157
show logging 158
SMTP Alerts 159
logging sendmail 160
logging sendmail host 160
logging sendmail level 161
logging sendmail destination-email 162
logging sendmail source-email 162
show logging sendmail 163
Time 163
SNTP Commands 164
sntp client 164
sntp poll 165
sntp server 166
show sntp 166
NTP Commands 167
ntp authenticate 167
ntp authentication-key 168
ntp client 169
ntp server 169
show ntp 170
Manual Configuration Commands 171
clock summer-time date 171
clock summer-time predefined 172
clock summer-time recurring 173
clock timezone 175
clock timezone-predefined 175

Contents
– 10 –
calendar set 176
show calendar 177
Time Range 177
time-range 178
absolute 178
periodic 179
show time-range 180
5 SNMP Commands 181
General SNMP Commands 182
snmp-server 182
snmp-server community 183
snmp-server contact 184
snmp-server location 184
show snmp 185
SNMP Target Host Commands 186
snmp-server enable traps 186
snmp-server host 187
snmp-server enable port-traps mac-notification 189
show snmp-server enable port-traps 190
SNMPv3 Commands 190
snmp-server engine-id 190
snmp-server group 191
snmp-server user 193
snmp-server view 194
show snmp engine-id 195
show snmp group 196
show snmp user 197
show snmp view 198
Notification Log Commands 199
nlm 199
snmp-server notify-filter 199
show nlm oper-status 201
show snmp notify-filter 201