EDIFIER XM3BT User manual

XM3BT
Multimedia Speaker
User manual
Unpack the Box 1
Box contents
Left satellite speaker Subwoofer Right satellite speaker
3.5mm-3.5mm audio cable
User manual

Illustrations 2
1. Press:
Bluetooth/USB/SD card mode: previous track
FM mode: quick adjustment to low frequencies
Press and hold:
USB/SD card mode: previous folder
2. Press: play/pause (Bluetooth/USB/SD card mode)
Press and hold: search for full frequencies (FM mode)
3. Press:
Bluetooth/USB/SD card mode: next track
FM mode: quick adjustment to high frequencies
Press and hold:
USB/SD card mode: next folder
4. Mode switch: AUX/Line in/Bluetooth/SD card/USB/FM
5. LED indicator
Green: AUX/Line in
Red: SD card/USB
Orange: FM
Blue: Bluetooth
6. Power switch
7. Power cable
8. Master volume control
9. SD card slot
10. Bass adjustment
11. USB connector
12. AUX input
13. Line in input
14. Output to satellite speakers

Connection 3
1. Connect satellite speakers to subwoofer using connecting cables from the satellite speakers,
please pay attention to color matching: red port is right sound channel and white port is left
sound channel.
2. Connect subwoofer to power source using power cable from the subwoofer and turn on
power switch, LED indicator will be lit and the speakers should be ready to go.
3. Connect to audio sources.

Operational Guide 3
1. Connect to audio source.
2. Select audio source.
3. Play music on the connected device and adjust the settings to a desired level.
Green:AUX/Line in
Blue: Bluetooth
Orange: FM radio
Red: SD card/USB

Operational Guide 4
1. Press the “”button on the side panel of the subwoofer to select FM mode, LED
indicator will turn orange.
2. Press and hold the “”button on the side panel of the subwoofer to start searching for
and presetting radio stations, orange indicator will flash during searching and will be
constantly lit after searching is complete.
3. Press the “ ” button to adjust FM frequency.
Note:
①It can preset 70 radio stations during FM search.
②The default frequency range is 87.5MHz~108MHz.
FM Mode
Orange: FM

Operational Guide 5
1. Press the “”button on the side panel of the subwoofer to select Bluetooth mode, LED
indicator will turn blue.
2. Set your Bluetooth device to search for and connect to “EDIFIER XM3BT”.
3. Pin code for connection is “0000”if needed.
4. Play music on the connected device and adjust the settings to a desired level.
Note:
* To enjoy all Bluetooth functions of this product, please ensure your audio source device has
A2DP (Advanced Audio Distribution Profile) profile.
* Bluetooth connectivity and compatibility may be different between different source devices,
depending on the software versions of source devices.
Bluetooth mode

Specifications 6
Power output: R/L: 8W+8W SW: 18W
Frequency response: R/L: Hz-KHz SW: Hz-Hz
Mid-range and treble unit: 3 1/2 inch (88mm)
Bass unit: 5 1/4 inch (148mm)
Audio input: AUX/Line in/Bluetooth/USB/SD card