edishine HLFL02H User manual

Thank you for your purchase.
Please contact us if you have any questions.
We will get back to you within 24 hours.
Please attach your Order ID so that
we can serve you better.
LED Floor Lamp
SKU: HLFL02H
Instruction Manual

01
1. Before assembly, place all parts out on a clean flat surface and inspect
each part for defects that may have occurred during shipping.
2. Inspect wire insulation for any cuts, abrasions or exposed copper that
may have resulted during shipping. If there are any defects in the wire,
DO NOT continue to assemble. Please send an email to our Customer
Service immediately.
3. Consult a qualified electrician if you have any electrical questions.
4. Never drape clothes over the lamp.
5. To reduce the likelihood of tipping over, we recommend placing the lamp
behind furniture and keep children and pets away.
6. To prevent children from suffocating and choking, keep them away from
packing materials.
7. Please keep this manual and hand it over when you transfer the product.
Caution
Packing List

02
Assembly Instruction
Before assembly,please compareto the packing list to make sure
all parts are present;
Part Description Quantity
1 Column Floor Lamp 1
2 Base 1
3 Metallic Gasket 1
4 Screw 1
5 Spanner 1
6 Power Line 1
Adapter
8 Instruction Manual 1
7 1
C
D
3

03
1. Screw the Column Floor Lamp (1) clockwise onto Base (2) through the
screw until tight.
2. Connect the Adapter connector (D) to the Adapter (C) and then Spin
lock(3)
3. Place the floor lamp where you need it and plug it in the power supply.
Foot Switch ＆Stepless Dimming
Short press to turn on/off it; Long press to adjust the level;
After the short press to turn it on, and then Long press the foot switch,
the light will gradually to brighten or darken, just moves your foot away
when you think the brightness is ok.
Memory function: the floor lamp can remember the mode of the brightness
you settled before closing.
Specifications
- Product Height: 46.3 IN
- Base Length: 8.3 IN
- Wire Length:70 IN
- Materials: wood，PC
- Input Voltage: AC100V-240V 60Hz
- Max.Load Power:12W-3000K-600LM
One Year Limited Warranty
EDISHINE warrants this product to be free from defects in material and
workmanship for a period of one year from the date of purchase.
Warranty is void if dam age is caused by misuse or improper installation.
Email: [email protected]
Our dedicated customer service team will get back to you within 24 hours.
Function