Edision primo IP S2 User manual

Congratulations on purchasing an EDISION primo IP S2
Please note that this information is valid at the time of publication.
Current information and detailed user manuals can be found on the Internet at: www.edision.gr
Unpacking
Connecting and switching on
Remote control with 2 AAA batteries Documentation Service note
1
2
Receiver primo IP S2
Notes: The front is factory tted with a protective foil
which can be removed easily and with caution. (Protective foil only for devices with display)
The scope of delivery may also include parts not listed here
Front Panel
1POWER button: Activates/Deactivates the device
2CH- / CH+ buttons: for moving in the program lists
3
Infrared sensor for the reception of remote
control commands
4
Display LED, displays current information
5Card reader
Back Panel
6LNB IN: Connection for the coaxial cable
to the signal from the satellite system
7S/PDIF: Audio interface for amplier/audio console
8ETHERNET: Ethernet port RJ45 10/100 Mbps
9HD OUT: Connection to an HDTV quality TV
10
SCART: For connecting to a TV set,
using SCART cable [not for HD TV]
11
Connection for an adapter (DC 12V/1,0A)
Subpages
12
/ 2 x USB: Connection for USB storage devices
13
RS 232: For connecting to a PC, for receiver software update.
14
IR IN: Infrared connection port
Note: For interference-free satellite TV reception,
a specialist technician must calibrate your satellite
TV system with a digital TV level meter
• Connect the receiver using HDMI cable via the
HD OUT output port to your TV’s HD OUT input port
• Now connect the receiver to the satellite
antenna cable via the LNB IN input.
• Insert the batteries into the remote control.
Notes on the remote control can be found on
the back of these instructions.
• Connect the receiver to the power supply.
• The receiver starts with the BOOT process and
is operational within a short time
Please contact
your EDISION
specialist dealer
for any further
support
and service.
primo IP S2
Full HD Sat Receiver
35mm
110mm
146mm
DC 12V/1,0 A
S/PDIF HD OUT
LNB IN 13/18V
400mA MAX
ETHERNET SCART
1
HDMI in
2
HD mi
kabel
HDMI
kabel
Power socket
HD OUT:
Output receiver
HDMI cable
TV set connection panel
Use an HDMI input!
LNB IN: Connecting
the cable to the satellite
signal
coaxial-wire Antenna
primo IP S2
POWER CH- CH+
1 2
3
4
5
RS 232 IR IN
12
13 14
DC 12V/1,0 A
S/PDIF HD OUT
LNB IN 13/18V
400mA MAX
ETHERNET SCART
678
9
10
11
RIGHT LEFT

primo IP S2
Full HD Sat Receiver
Visit us on:
www.edision.gr
Remote Control UNIVERSAL 1
3
Notes: Many of the listed buttons have multiple functions, which, are displayed in the
menus. Some buttons and functions are optional. Important functions and buttons are
briey explained below. The buttons to be used are marked in red in the diagrams.
Power
Switches between operation and standby
< (PREV)
Return to the previous channel/service or
move to the end of the Service List or the Play List
Help
This provides users with a quick guide of
using Edision OS nino
Menu
Open main menu & select sub menu using
by navigation buttons
EXIT
Close and return to the previous menu and screen
RADIO - TV
Switch to TV mode.
Switch to Radio mode
COLOR BUTTONS
Activates certain menu functions.
Usage instructions are shown in each OSD menu
Audio
Select an audio track and a sound mode
PLAY
Starts timeshift if available
REC
Activates immediately recording-option
NUMERIC KEY (0-9)
Control the numerical operation
and change the Channel/Service
number directly
> (NEXT)
Go to the next channel/service
or move to the beginning of the
Service List or the Play List
TIMER
Start timer function
INFO
Displays the Electronic Program Guide (EPG)
information if provided
EPG
Displays the Electronic Program Guide (EPG)
information if provided
Mute
Mutes or unmutes the audio temporarily
TEXT
Switch between the teletext and TV modes
SUBTITLE
Display the subtitle language list
<
PREV
MANUAL INSTRUCTION FOR LEARN REMOTE CONTROL EDISION UNIVERSAL 1
Your set-top-box remote control has 5 learning-function keys, in the up right hand side TV keypad panel area. Each one can be used accordingly
as the following example:
1. Turning your TV set ON/OFF [TV POWER]
2. Selecting screen RATIO [Auto, 16:9, 4:3, etc)]
3. Increasing/decreasing volume [VOL+ , VOL-]
4. Command confirmation [BACK or EXIT]
The other 48 keys are for the control of the EDISION set-top-box.
SET UP FOR LEARNING FUNCTION
• Press [TV POWER] key in the up right hand side TV keypad panel area continuously for 5 Sec. until the LED lights up and keep lighting, then release the
key. This means the remote control is in the learning mode.
• Within 10 seconds, press the key in the original TV IR control, which needs to be learned, for example the [POWER] key, then the red LED is flashing. It
means this button is ready to receive the learning signal.
• Aim the emission port of the original TV remote control at the front at the emission port at the front of your set-top box remote control (distance between
these two ports has to be about 2~3 CM).
• Then press the key which is to be learned in your original TV remote control, for example the [POWER] key of your original TV remote control continuously
for 3 seconds. If the red LED flashes quickly for three times and keep lighting, it means the set-top box remote control has succeeded in receiving the
signal and you have completed the learning procedure of ON/OFF [TV POWER] key.
• Then release the [POWER] key of your original TV remote control.
If the copying procedure fails , the red LED will blink and stay OFF. In this case please repeat the procedure.
For the next programmable function, please repeat steps 1 to 3:
• Selecting screen ratio with RATIO [Auto, 16:9, 4:3, etc]
• Increasing/decreasing volume [VOL+ , VOL-]
• Command confirmation [BACK or EXIT]
Now you can operate your TV with the 5 programmed by you keys of your set-top box remote control. During the operation, the LED will flash to indicate that the
signal is transmitted!
EDISION UNIVERSAL 1 REMOTE CONTROL is compatible with all EDISION STB’s*, plus it is pre-programmed with 5 basic functions
for SAMSUNG & LG** tv sets. Alternatively, you can program its 5 programmable buttons to any 5 functions of your TV.
* For EDISION STB compatibility, please visit our webpage
**LG & SAMSUNG are brand names that belong solely to LG Electronics Inc. and Samsung Electronics Co., Ltd
respectively. Any brand name reference in this text is only for informational purposes towards the consumer
that is interested in the product.
VOL +
RATIO
BACK
VOL -
TV POWER