Edison picco T265 User manual
Congratulations on purchasing an EDISΙON picco T265
Please note that this information is valid at the time of publication.
Current information and detailed user manuals can be found on the Internet at: www.edision.gr
Unpacking
Connecting and switching on
Remote control with 2 AAA batteries Documentation Service note
1
2
1
HDMI in
2
HD mi
kabel
HDMI
kabel
Receiver picco T265
Notes: The front is factory tted with a protective foil
which can be removed easily and with caution. (Protective foil only for devices with display)
The scope of delivery may also include parts not listed here
Front Panel
1
/ USB: Connection for USB storage devices
2
Display LED, displays current information
3
Infrared sensor for the reception of remote control commands
4CH- / CH+ buttons: for moving in the program lists
5POWER button: Activates/Deactivates the device
Back Panel
6ANT IN: Input for connecting the signal from the antenna
7S/PDIF: Audio interface for amplier/audio console
8HD OUT: Connection to an HDTV quality TV
9SCART: For connecting to a TV set,
using SCART cable [not for HD TV]
10
Connection for an adapter (DC 5V)
Subpages
11
IR IN: Infrared connection port
Note: For trouble-free signal reception your antenna
and cable installation should be calibrated and
inspected by a qualied professional with a digital
TV-level-measuring instrument.
•
Connect the receiver using HDMI cable via the
HD OUT output port to your TV’s HDMI input port
•
Then connect the coaxial cable from the terrestrial
antenna to the ANT IN input of the receiver.
•
Insert the batteries into the remote control.
Notes on the remote control can be found on
the back of these instructions.
•
Connect the receiver to the power supply.
•
The receiver starts with the BOOT process and
is operational within a short time
Please contact
your EDISION
specialist dealer
for any further
support
and service.
Power socket
HD OUT:
Output receiver
HDMI cable
TV set connection panel
Use an HDMI input!
ANT IN:
coaxial-wire
input from terrestrial
antenna.
picco T265
Digital Terrestrial Receiver DVB-T2 H.265/HEVC
88 mm
126 mm
30 mm
coaxial-wire Antenna
picco T265
1
23 4
5
67
8
910
IR
11
After the rst start,
choose your language
The CE certificate of the product is available on our webpage, by visiting this link: https://www.edision.gr/en/support
Support
Visit us on:
www.edision.gr
picco T265
Digital Terrestrial Receiver DVB-T2 H.265/HEVC
EDISION HELLAS LTD • FARMAKEIKA - 57001 N. RISIO • THESSALONIKI - GREECE
Remote Control UNIVERSAL REMOTE CONTROL 2in1
3
EDISION UNIVERSAL REMOTE CONTROL 2in1 is compatible with all EDISION STB’s*, plus it is pre-programmed with 4 basic functions
for SAMSUNG & LG** tv sets. Alternatively, you can program its 4 programmable buttons to any 4 functions of your TV.
Power
Switches between operation and standby
Mute
Mutes or unmutes the audio temporarily
PAGE+ / PAGE -
Scrolls the channel-list forward or backwards
V. FORMAT
Changes the display TV standard
FIND
For searching for programms in lists
Menu
Open main menu & select sub menu
using by navigation button
INFO
Displays the information bar
EXIT
Stops a menu/pop-up window
EDV
Selection of the electronic program support
EDIVISION
RECALL
Returns to previous channel
TV/RADIO
Switch to TV mode. Switch to Radio mode
NUMERIC KEY (0-9)
Control the numerical operation
and change the Channel/Service
number directly
Displays a le-list
Safe USB Removal
REC
Activates immediately recording-option
PLAY/PAUSE
Play start/pause
Stops timeshift, recording or playing
Allows you to set the time
at which the Receiver autom.
switches to standby mode
Activates the audio-menu
Option button. Switching between
TV/AV mode (Not in HDMI mode)
Activates the menu “Subtitle/teletext”
Web TV key
MANUAL INSTRUCTION FOR LEARN
EDISION UNIVERSAL REMOTE CONTROL 2in1
Your set-top-box remote control has 4 learning-function keys, in the up right hand side TV
keypad panel area. Each one can be used accordingly as the following example:
1. Turning your TV set ON/OFF [SET]
2. Increasing/decreasing volume [VOL+ , VOL-]
3. Switching between TV/AV mode [TV/AV]
The other 39 keys are for the control of the EDISION set-top-box.
SET UP FOR LEARNING FUNCTION
• Press [SET] key in the up right hand side TV keypad panel area continuously for 5 Sec. until the LED lights up and keep lighting, then release the key. This
means the remote control is in the learning mode.
• Within 10 seconds, press the key in the original TV IR control, which needs to be learned, for example the [POWER] key, then the red LED is flashing. It
means this button is ready to receive the learning signal.
• Aim the emission port of the original TV remote control at the front at the emission port at the front of your set-top box remote control (distance between
these two ports has to be about 2~3 CM).
• Then press the key which is to be learned in your original TV remote control, for example the [POWER] key of your original TV remote control continuously
for 3 seconds. If the red LED flashes quickly for three times and keep lighting, it means the set-top box remote control has succeeded in receiving the
signal and you have completed the learning procedure of ON/OFF [TV POWER] key.
• Then release the [POWER] key of your original TV remote control.
If the copying procedure fails , the red LED will blink and stay OFF. In this case please repeat the procedure.
For the next programmable function, please repeat steps 1 to 2:
• Switching between TV/AV mode [TV/AV]
• Increasing/decreasing volume [VOL+ , VOL-]
Now you can operate your TV with the 4 programmed by you keys of your set-top box remote control.
During the operation, the LED will flash to indicate that the signal is transmitted!
* For EDISION STB compatibility, please visit our webpage
**LG & SAMSUNG are brand names that belong solely to LG Electronics Inc. and Samsung Electronics Co., Ltd
respectively. Any brand name reference in this text is only for informational purposes towards the consumer
that is interested in the product.
Other Edison Receiver manuals
