Edison Nano t265+ User manual

Congratulations on purchasing an EDISΙON nano T265+

Please note that this information is valid at the time of publication.

Current information and detailed user manuals can be found on the Internet at: www.edision.gr

Unpacking

Connecting and switching on

Package Contents Documentation Service note

Note: For trouble-free signal reception your antenna

and cable installation should be calibrated and

inspected by a qualied professional with a digital

TV-level-measuring instrument.

•

Connect the receiver using HDMI extension cable

via the HDMI port to your TV’s HDMI input port

•

Then connect the coaxial cable via SMA to IEC

adaptor with the terrestrial or cable signal to the ANT

IN input of the receiver.

•

Connect the Jack to IR cable to the IR IN port to

control the STB with the Remote Control unit.

•

Insert the batteries into the remote control. Notes on

the remote control can be found on the back of these

instructions.

•

For STB powering (DC 5V) via TV USB port, connect

the USB cable type-Y to the USB port of the STB

and to the USB port on the TV.

•

The receiver starts with the BOOT process and is

operational with in a short time.

Please contact

your EDISION

specialist dealer

for any further

support

and service.

12mm

nano T265+

Digital Terrestrial & Cable HDMI dongle Receiver DVB-T2/C H.265/HEVC

80 mm

27 mm

The CE certificate of the product is available on our webpage, by visiting this link: https://www.edision.gr/en/support

Support

USB

For information about EDISION Hardware or Software

matters, please contact [email protected] or visit the

DOWNLOAD CENTER: https://www.edision.gr/en/support

“The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo

are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.”

Receiver nano T265+

Note: The scope of delivery may also include parts not listed here.

23 4

567 8

HDMI in

USB 2 USB 1

After the rst start,

choose your language

ANT IN:

coaxial-wire input from

terrestrial / cable signal

coaxial-wire Antenna

Package Contents

1Receiver

2IR Remote Control 2in1

3USB cable type-Y

4HDMI extension cable

5IR cable

6SMA to IEC adaptor

71 x Cable tie

82 x «ΑΑΑ» batteries

9Mini Manual GR/EN/DE/ES/IT/FR

Connections

1HDMI: Connection to an HDTV quality TV

USB: Connection for USB storage devices & Powering (DC 5V)

via TV USB port

3Infrared sensor for the reception of remote control commands

4ANT IN: Input for connecting to terrestrial or cable signal from the

antenna via SMA to IEC adaptor

nano T265+

Digital Terrestrial & Cable HDMI dongle Receiver DVB-T2/C H.265/HEVC

Visit us on:

www.edision.gr

EDISION HELLAS LTD • FARMAKEIKA - 57001 N. RISIO • THESSALONIKI - GREECE

Remote Control UNIVERSAL REMOTE CONTROL 2in1

EDISION UNIVERSAL REMOTE CONTROL 2in1 is compatible with all EDISION STB’s*, plus it is pre-programmed with 4 basic functions

for SAMSUNG & LG** tv sets. Alternatively, you can program its 4 programmable buttons to any 4 functions of your TV.

Power

Switches between operation and standby

Mute

Mutes or unmutes the audio temporarily

PAGE+ / PAGE -

Scrolls the channel-list forward or backwards

V. FORMAT

Changes the display TV standard

FIND

For searching for programms in lists

Open main menu & select sub menu

using by navigation button

INFO

Displays the information bar

EXIT

Stops a menu/pop-up window

EDV

Selection of the electronic program support

EDIVISION

RECALL

Returns to previous channel

TV/RADIO

Switch to TV mode. Switch to Radio mode

NUMERIC KEY (0-9)

Control the numerical operation

and change the Channel/Service

number directly

Displays a le-list

Safe USB Removal

REC

Activates immediately recording-option

PLAY/PAUSE

Play start/pause

Stops timeshift, recording or playing

Allows you to set the time

at which the Receiver autom.

switches to standby mode

Activates the audio-menu

Option button. Switching between

TV/AV mode (Not in HDMI mode)

Activates the menu “Subtitle/teletext”

Web TV key

MANUAL INSTRUCTION FOR LEARN

EDISION UNIVERSAL REMOTE CONTROL 2in1

Your set-top-box remote control has 4 learning-function keys, in the up right hand side TV

keypad panel area. Each one can be used accordingly as the following example:

1. Turning your TV set ON/OFF [SET]

2. Increasing/decreasing volume [VOL+ , VOL-]

3. Switching between TV/AV mode [TV/AV]

The other 39 keys are for the control of the EDISION set-top-box.

SET UP FOR LEARNING FUNCTION

• Press [SET] key in the up right hand side TV keypad panel area continuously for 5 Sec. until the LED lights up and keep lighting, then release the key. This

means the remote control is in the learning mode.

• Within 10 seconds, press the key in the original TV IR control, which needs to be learned, for example the [POWER] key, then the red LED is flashing. It

means this button is ready to receive the learning signal.

• Aim the emission port of the original TV remote control at the front at the emission port at the front of your set-top box remote control (distance between

these two ports has to be about 2~3 CM).

• Then press the key which is to be learned in your original TV remote control, for example the [POWER] key of your original TV remote control continuously

for 3 seconds. If the red LED flashes quickly for three times and keep lighting, it means the set-top box remote control has succeeded in receiving the