EDP GEIST COOL SwitchAir 83-SA2-004 User manual

83-SA2-004 Installation Guide
SwitchAir Active Network Switch Cooling
Effective cool air delivery for rear rack mounted
switches with front (port) air intake.
Installation Precaution:
●Install SwitchAir such that the required airow for safe operation of equipment is not compromised.
●Take precaution to avoid interference with the switch input power cords when installing on a live unit.
SwitchAir Installed in Rack
Installs in minutes while network switch is live.
83-SA2-004 Specications
Rail Depth Range 26.625” to 29.625”
(676mm to 752mm)
Input Connector C14
Chassis Depth 9” (229mm) Airow 94 CFM
Channel Depth 26” (660mm) Switch
Intake / Exhaust
Front/Rear
Input
Power / Indicator
90-264 VAC 50/60Hz
15 watts
LED Power Indicator
Safety / Approvals UL, cUL 60950, CE,
FCC Class A
www.edpeurope.com

Installing the SwitchAir
1. A The channels attach to the inside of
the rack using cage nuts and screws.
The front side channels use the top
and bottom holes for their attachment.
The rear channels are supported by the
stabilising tabs that attached to the air
trunk. When the air trunk is inserted into
place the stabilising tabs slide into the
channels.
2. Insert Air Trunk between channels on
top of network switch. The stabilising
tabs slide into the opening on each
channel. Secure the air trunk to the rack
using cage nuts and screws.
3. Attach Wipers to chassis using provided
pan head screws.
4. Slide Chassis into channels and attach
to rack using customer provided cage
nuts and screws.
Ver: EDPSA2004IG1118.1
üwww.edpeurope.com [e-mail] Å+44 (0)1376 510337