EDP SwitchAir 83-SA2-002 User manual

83-SA2-002 Installation Guide
SwitchAir Active Network Switch Cooling
Effective cool air delivery for multiple rear rack mounted
1U switches Universal for rear intake or side intake
switch types.
Installation Precaution:
●Install SwitchAir such that the required airow for safe operation of equipment is not compromised.
●Take precaution to avoid interference with the switch input power cords when installing on a live unit.
SwitchAir Installed in Rack
Installs in minutes while network switch is live.
Specications
Rail Depth Range 26.625” to 29.625”
(676mm to 752mm)
Input Connector C14
Chassis Depth 9” (229mm) Airow 94 CFM
Channel Depth 26” (660mm) Switch
Intake / Exhaust
Dual Side/Rear
Input
Power / Indicator
90-264 VAC 50/60Hz
15 watts
LED Power Indicator
Safety / Approvals UL, cUL 60950, CE,
FCC Class A
www.edpeurope.com

Installing the SwitchAir
1. Attach Rear Air Channel to the Side Air
Channel for rear air intake switches only.
Discard for side air intake switches.
2. Place cage nuts in all four channel
mounting holes. Attach Channel to
inside of front rail using screws at top
and bottom cage nuts positions (rack rail
cage nuts and screws not included).
3. Attach SwitchAir Wipers to the sides of
the SwitchAir Chassis using the screws
provided. Do not install Wipers for
network switches with rear air intake.
4. Connect to power before attaching
SwitchAir Chassis to rack front. Slide
the SwitchAir Chassis into the SwitchAir
Channels from the front of the rack.
Attach the SwitchAir Chassis using four
screws (not included).
Ver: EDPSA2002IG1118.1
üwww.edpeurope.com [e-mail] Å+44 (0)1376 510337