EF EFCH 9106 HM SS User manual

THE BEAUTY OF SIMPLICITY
USER MANUAL
SLIM HOOD EFCH 9106 HM SS

Table of Contents
From the Manufacturer
Specifications
SAFETY: Read this before installation
Description of Parts
Ducted vs. Re-circulating
Setting
Installation
Operation
Cleaning & Maintenance
Troubleshooting
2
3
3
4
5
6
7
8,9
10
10
11

From the Manufacturer
This appliance and the packaging are produced by processes that
minimize waste and respect the environment.
Please help us to continue the protection of the environment
by disposing the packaging in a correct way.
Safety!
Please do not allow young children to play with the plastic bag
packaging.
Before disposing of any old appliances, be sure to cut off the power cord
so that others will not be endangered by a defective electric appliance.
Specifications
Input: 220-240V/50Hz
Power
200W
2x1W
100W
2 motor version:
1 motor version:
1x1W
Dimensions
597x501x100mm60cm version:
90cm version: 897x502x100mm
3
LED Lamp：
LED Lamp:

SAFETY: Read this before installation
Do not connect the appliance if there are obvious signs of transportation
damage.
Read this user manual thoroughly before attempting to use this appliance.
Installation and repair should be attempted only by qualified technical
personnel.
It is dangerous to modify any part of this appliance.
The manufacturer declines all responsibility in case of failure to adopt
proper safety measures.
Ensure the location in which this appliance is installed has good,
permanent ventilation.
The distance between the bench top to the lower part of the hood must not
be less than 65cm or higher than 75cm.
Check that the voltage in your area is correct before plugging in.
The electrical connection of this appliance must be connected to earth.
Green & yellow = EARTH
Blue = NEUTRAL
Brown = LIVE
Multiple plugs and extension cables must not be used. Overload is
dangerous and may cause a fire.
Ensure that the power supply cord is free from any heat source or sharp
objects.
The appliance should be switched off and the electrical supply
disconnected before any cleaning or maintenance work can be carried
out.
4

Description of Parts
Stopper
2 Charcoal filters
120mm
3 Aluminium filters( for 90CM)
6 Screws
5
2 Aluminium filters( for 60CM)
2 screws are used for fixing hood unit on the
wall as Installation Step 3.
Other 4 screws are used for fixing hood unit to
cabinet as well if necessary