Effekta THOR II T50 User manual

Manual
Product name THOR II T50
System Uninterruptible power supply
Type 50 –600 kVA
Revision V1.2
Language EN

1
All rights reserved.
The information in this document is subject to change without notice.
Publish statement
Thank you for purchasing this series UPS.
This series UPS is an intelligent, three phase in Three phase out, high frequency online UPS
designed by our R&D team who is with years of designing experiences on UPS. With excellent
electrical performance, perfect intelligent monitoring and network functions, smart
appearance, complying with EMC and safety standards, The UPS meets the world’s advanced
level.
Read this manual carefully before installation
This manual provides technical support to the operator of the equipment.

2
Contents
1．Safety....................................................................................................................................... 3
1.1 Safety notes ....................................................................................................................................... 3
1.2 Symbols used in this guide............................................................................................................ 3
2．Main Features........................................................................................................................ 4
2.1 Summarization................................................................................................................................... 4
2.2 Functions and Features .................................................................................................................. 4
2.3 Model description ............................................................................................................................. 5
3．Installation.............................................................................................................................. 6
3.1 Unpack checking .............................................................................................................................. 6
3.2 The appearance of the product..................................................................................................... 6
3.3 UPS module appearance .............................................................................................................. 20
3.4 Installation notes ............................................................................................................................ 20
3.5 External Protective Devices.......................................................................................................... 22
3.6 Power Cables................................................................................................................................... 22
3.7 Power cable connect...................................................................................................................... 26
3.9 Battery connection......................................................................................................................... 27
3.10 Online UPS Modules Replacement.......................................................................................... 28
3.11 UPS Multi－Module Installation ................................................................................................. 28
3.11.1 Cabinet installation ........................................................................................................... 28
3.11.2 Parallel cable installation ................................................................................................ 29
3.12 LBS installation (optional).......................................................................................................... 30
3.12.1 LCD setting ......................................................................................................................... 30
3.12.2 LBS cable installation ...................................................................................................... 30
3.12.3 UPS installation ................................................................................................................. 31
4．Operation.............................................................................................................................. 31
4.1 Operation Modes ............................................................................................................................. 31
4.2 Turn on/off UPS ............................................................................................................................... 34
4.2.1 Restart procedure................................................................................................................ 34
4.2.2 Test procedure ..................................................................................................................... 34
4.2.3 Cold start procedure........................................................................................................... 35
4.2.4 MAINTENANCE BYPASS ................................................................................................... 35
4.2.5 Shut down procedure......................................................................................................... 36
4.2.6 Startup procedure for parallel system ........................................................................... 37
4.3 The Display....................................................................................................................................... 37
4.4 Display Messages/Troubleshooting........................................................................................... 67
4.5 Options.............................................................................................................................................. 69
Appendix 1 Specifications ..................................................................................................... 70
Appendix 2 Problems and Solution..................................................................................... 73
Appendix 3 CAN communication port definition............................................................. 75
Appendix 4 RS485 communication port definition ......................................................... 75
Appendix 5 COM communication port definition ............................................................ 76
Appendix 6 LBS port definition ............................................................................................ 76
Appendix 7 REPO instruction ............................................................................................... 77

3
1．Safety
Important safety instructions –Save these instructions
There exists dangerous voltage and high temperature inside the UPS. During the
installation, operation and maintenance, please abide the local safety instructions and relative
laws, otherwise it will result in personnel injury or equipment damage. Safety instructions in this
manual act as a supplementary for the local safety instructions. Our company will not assume the
liability that caused by disobeying safety instructions.
1.1 Safety notes
1．Even no connection with utility power, 220/230/240VAC voltage may still exist at UPS outlet!
2．For the sake of human being safety, please well earth the UPS before starting it.
3．Don’t open or damage battery, for the liquid spilled from the battery is strongly poisonous and
do harmful to body!
4．Please avoid short circuit between anode and cathode of battery, otherwise, it will cause
spark or fire!
5．Don’t disassemble the UPS cover, or there may be an electric shock!
6．Check if there exists high voltage before touching the battery
7．Working environment and storage way will affect the lifetime and reliability of the UPS. Avoid
the UPS from working under following environment for long time
◆Area where the humidity and temperature is out of the specified range (temperature 0
to 40℃, relative humidity 5%-95%)
◆Direct sunlight or location nearby heat
◆Vibration Area with possibility to get the UPS crashed.
◆Area with erosive gas, flammable gas, excessive dust, etc
8．Keep ventilations in good conditions otherwise the components inside the UPS will be
over-heated which may affect the life of the UPS.
1.2 Symbols used in this guide
WARNING!
Risk of electric shock

4
CAUTION!
Read this information to avoid equipment damage
2．Main Features
2.1 Summarization
Our UPS is a kind of three-in- three -out high frequency online UPS, it provides three
specifications: The 150~600kVA. The products are modularized and adopt the N+X redundancy.
It can flexibly increase the number of the UPS modules according to the load capacity which is
convenient for flexible allocation and gradually investment.
The UPS can solve most of the power supply problems, such as blackout, over-voltage,
under-voltage, voltage sudden drop, oscillating of decreasing extent, high voltage pulse, voltage
fluctuation, surge, inrush current, harmonic distortion (THD), noise interference, frequency
fluctuation, etc..
This UPS can be applied to different applications from computer device, automatic equipment,
communication system to industry equipment
2.2 Functions and Features
◆Digital control
◆19-inch standard cabinet
1.2-meter, 1.6-meter and 2-meter high cabinets are provided according to the user’s
requirement.
◆Modularized design
◆High power-density design
The height of the single module is 3U.
◆N+X parallel redundancy
This series UPS adopts N+X parallel redundancy design, user can set different redundancy
according to the importance of the load. While the redundancy modules are set more than two,
the availability of UPS system will achieve 99.999%, which may satisfy the required reliability of
the critical load connected. Through LCD display setting, you may configure the required quantity
of the redundancy unit. When the load connected is over the number of the redundancy, the UPS
will alert right away. The design of the MTBF (Meantime before Failure) is up to 250,000 hours.
This series can set the number of redundancy modules. When the load exceeds the
redundancy setting, the UPS can still work normally and simultaneously send out corresponding
warning as long as the load doesn’t exceed the total capacity of modules.
◆Parallel redundant control system
◆Optimizing distributed convergence for the cabinet
◆Centralized bypass
◆Common Battery
◆Automatic charge current adjustment according to battery capacity connected.

5
◆3-Stage intelligent charging
◆Touch-screen Super-large LCD display
◆Remote monitoring via SNMP
◆Optional Accessories available such as Isolation transformer, distribution Panel, SNMP Card,
Relay Contact Board, etc...
◆Equip with Maintenance Bypass Switch for easy maintenance purpose.
◆Superior MTTR (Meantime to repair) & Short shutdown time in maintenance
◆Centralized monitoring module is also available
◆EPO and REPO function
2.3 Model description
This document describes the following UPS models:
◆150kVA
The models provide 3 configurations: 50kVA, 100kVA and 150kVA.
◆250kVA
The models provide 5 configurations: 50kVA, 100kVA, 150kVA, 200kVA and 250kVA.
◆200kVA
The models provide 4 configurations: 50kVA, 100kVA, 150kVA and 200kVA
◆300kVA
The models provide 6 configurations: 50kVA, 100kVA, 150kVA, 200kVA, 250kVA and
300kVA.
◆400kVA
The models provide 8 configurations: 50kVA, 100kVA, 150kVA, 200kVA, 250kVA, 300kVA,
350kVA and 400kVA.
◆500kVA
The models provide 10 configurations: 50kVA, 100kVA, 150kVA, 200kVA, 250kVA,
300kVA, 350kVA, 400kVA, 450kVA and 500kVA.
◆600kVA
The models provide 12 configurations: 50kVA, 100kVA, 150kVA, 200kVA, 250kVA,
300kVA, 350kVA, 400kVA, 450kVA, 500kVA, 550kVA and 600kVA.

6
3．Installation
3.1 Unpack checking
1. Don’t lean the UPS when moving it out from the packaging
2. Check the appearance to see if the UPS is damaged or not during the transportation, do
not switch on the UPS if any damage found. Please contact the dealer right away.
3. Check the accessories according to the packing list and contact the dealer in case of
missing parts.
3.2 The appearance of the product
150kVA(Full configuration), bottom entry
Front View Side View Rear View

7
Front View (internal)
200kVA & 250kVA(Full configuration) , bottom entry
Front View Side View Rear View
200kVA (Full configuration) , bottom entry

8
Front View (internal) Front View (Copper bar)
250kVA(Full configuration) , bottom entry
Front View (internal) Front View (Copper bar)
200/300/400kVA(Standard and Full configuration) , top or bottom entry

9
Front View Side View Rear View
200kVA(Standard and Full configuration) , top entry

10
standard configuration full configuration
Connect copper bar
200kVA(Standard and Full configuration) , bottom entry
standard configuration full configuration

11
Connect copper bar
300kVA(Standard and Full configuration) , top entry
standard configuration full configuration

12
Connect copper bar
300kVA(Standard and Full configuration) , bottom entry
standard configuration full configuration

13
Connect copper bar
400kVA (Standard configuration), top entry
Standard configuration Connect copper bar

14
400kVA (Standard configuration), bottom entry
Standard configuration Connect copper bar
400/500/600kVA (Standard and Full configuration), top and bottom entry
Front View Side View Rear View
400kVA (Full configuration) , top and bottom entry

15
Full configuration
Connect coppper bar Mains-bypass common copper bar
500kVA(Standard and Full configuration) , top and bottom entry

16
Standard configuration Full configuration
Connect coppper bar Mains-bypass common copper bar
600kVA (Standard and Full configuration) , top and bottom entry

17
Standard configuration Connect copper bar
Connect coppper bar Mains-bypass common copper bar
(1) LCD panel : Display UPS data and status
(2) EPO key : for location energy power stop
(3) Front door lock
(4) Power module
(5) Control unit

18
(6) Mains switch
(7) Output switch
(8) Maintenance switch
(9) Bypass switch
(10) Bypass module
(11) Mains-A input copper bar
(12) Mains-B input copper bar
(13) Mains-C input copper bar
(14) Input neutral copper bar
(15) Battery negative copper bar
(16) Battery neutral copper bar
(17) Battery positive copper bar
(18) Output-A input copper bar
(19) Output-B input copper bar
(20) Output-C input copper bar
(21) Output neutral copper bar
(22) Bypass-A input copper bar : Wiring must be used when mains-bypass separation
(23) Bypass-B input copper bar : Wiring must be used when mains-bypass separation
(24) Bypass-C input copper bar : Wiring must be used when mains-bypass separation
(25) Phase A mains-bypass common input connect copper bar
(26) Phase B mains-bypass common input connect copper bar
(27) Phase C mains-bypass common input connect copper bar
Control unit
(1) ECU1/2 : Centralized control unit
(2) Dry-contact unit
(3) monitor unit
(4) Intelligent slot
ECU unit

19
(1) PARALLEL port
(2) LBS port
(3) LED
Dry-contact unit
(1) EPO port : NO-12V : normaly open port; NC-12V : normaly close port;
(2) SWITCH STATUS : OUT-0V : output breaker auxiliary contact singnal port; MT-0V :
maintenance breaker auxiliary contact singnal port; BP-0V : bypass breaker auxiliary contact
singnal port; BAT-0V : battery breaker auxiliary contact singnal port;
(3) The other port : BTG-0V : battery grounding detect singnal input port; DRV-0V : battery
breaker driver singnal output port; SPD-0V : SPD detect singnal input port; GEN-0V :
generator detect singnal input port;
(4) BP_FEEDBACK : PIN1_NC, PIN2_NO,PIN4_common
(5) Optional dry contacts : 6 ports, can optional by LCD.
Monitor unit
(1) BAT_T : NTC temperature sensor port
(2) R-CAN : CAN communication resistor adjust
(3) USB port : for software updata and history download
(4) RS232 port : for communication