Effekta ADIRA Series User manual

Uninterruptible Power Supply
ADIRA 700VA - 3kVA
(Tower and Rack/Tower, including the XL- and
short-versions)
User Manual V 1.1
Item number: ACX11A1Sxxxxxxxx
ACX11A1SxxxxxxXL
ACX11A1Txxxxxxxx
ACX11A1TxxxxxxXL
English Operating Manual (translation)

ADIRA 700VA - 3kVA (XL)
Legal Notice
ADIRA Series
2
Legal Notice
©by EFFEKTA Regeltechnik GmbH
This document is only intended for the user and their staff. The content of this
document (text, figures, drawings, graphs, plans, etc.) may not be, as a whole or
partially, reproduced or distributed without our written consent or utilized without
authorization for the purpose of competition or issued or made accessible to
third parties.
The publication and the copyright for this document belong to the company:
EFFEKTA Regeltechnik GmbH
Rheinwaldstrasse 34
78628 Rottweil, Germany
Telephone: + 49 (0) 741 17451 - 0
Telefax: + 49 (0) 741 17451 - 22
Email: [email protected]
Internet: www.effekta.com
Operating Manual: V 1.1
Language: English
Date of issue: 08/2023
We reserve the right to make changes to the design and device that will improve
the system, the production process, or the product.

ADIRA 700VA - 3kVA (XL)
Table of Contents
ADIRA Series
3
Table of Contents
1. Introduction ............................................................................................................. 5
1.1 Preface...................................................................................................................... 5
1.2 Validity....................................................................................................................... 6
1.3 Storage...................................................................................................................... 6
1.4 Abbreviations, terms and symbols ............................................................................. 6
1.5 Information obligation ................................................................................................ 9
1.6 Warranty conditions ................................................................................................. 10
1.7 Limitation of liability.................................................................................................. 11
2. Safety instructions ................................................................................................ 12
2.1 Introduction.............................................................................................................. 12
2.2 Proper use............................................................................................................... 12
2.3 Prevention of personal injury / property damage ...................................................... 13
2.4 Environmental protection ......................................................................................... 13
2.5 Transport and storage ............................................................................................. 13
2.6 Positioning............................................................................................................... 14
2.7 Connection .............................................................................................................. 15
2.8 Operation................................................................................................................. 16
2.9 Working with accumulators ...................................................................................... 16
2.10 Maintenance, service and malfunctions ................................................................... 17
3. UPS device description......................................................................................... 18
3.1 Topology and operating modes................................................................................ 18
3.2 The device series, format and housing sizes ........................................................... 22
3.3 The UPS and its components in detail ..................................................................... 24
4. Storage and unpacking ......................................................................................... 35
4.1 Storage of the UPS.................................................................................................. 35
4.2 Transport to the installation site ............................................................................... 35
4.3 Unpacking and positioning the UPS......................................................................... 36
4.4 Scope of delivery ..................................................................................................... 37
5. Installation and connection of the UPS................................................................ 39
5.1 External bypass ....................................................................................................... 41
5.2 Connection preparations.......................................................................................... 41
5.3 Connecting the UPS device ..................................................................................... 42
6. Communication ..................................................................................................... 49
7. Device operation and service ............................................................................... 54
7.1 Operation and performance of the UPS ................................................................... 54

ADIRA 700VA - 3 kVA (XL)
Table of Contents
ADIRA Series
4
7.5 Settings for the UPS device ..................................................................................... 58
8. Initial operation of the UPS ................................................................................... 60
9. Error diagnosis ...................................................................................................... 61
10. Troubleshooting .................................................................................................... 64
11. Service hotline ....................................................................................................... 64
12. Maintenance and service....................................................................................... 65
12.1 Measuring the support time (autonomous time) ....................................................... 65
12.3 Maintenance and service contracts.......................................................................... 69
12.4 Service log............................................................................................................... 70
13. Technical data........................................................................................................ 71
13.1 ADIRA T .................................................................................................................. 71
13.2 ADIRA RT................................................................................................................ 72
14. Scope of delivery ................................................................................................... 74
15. Optional accessories............................................................................................. 75
15.1 External battery bank and connection cable............................................................. 75
15.2 External bypass ....................................................................................................... 75
15.3 Communication adapter SNMP................................................................................ 76
15.4 Communication adapter, relay card (Z0C/AS400) .................................................... 76
16. Wear parts list........................................................................................................ 77
17. Declaration of conformity...................................................................................... 78

ADIRA 700VA - 3kVA (XL)
Introduction
ADIRA Series
5
1. Introduction
1.1 Preface
Dear User,
This manual is required for the operation of the uninterruptible power supply
described herein. This operating manual should provide you with support for
working responsibly and give basic information about the uninterruptible power
supply, namely how it works, its application, and, in addition, what steps to take
in the event of malfunctions. Furthermore, this operating manual contains
instructions for the transport and storage as well as for the handling and
installation of the uninterruptible power supply.
The planning guidelines in this operating manual only relate to special
requirements and characteristics of the uninterruptible power supply. All
national and local provisions and regulations for electrical installations must be
adhered to during the installation process. The same applies for the operation
of the device.
The content of this operating manual may change due to technological
progress. We have done our best to present the content accurately and
comprehensibly. If, however, we have made errors, we would be grateful if you
inform us.
We do not assume any liability for errors in this operating manual or any
consequences resulting thereof.
The uninterruptible power supply is intended to protect sensitive electronic
systems and equipment from interferences that could occur due to poor
electrical quality or network failures.
Please read this operating manual carefully and take particular note of the
safety instructions!
If you have questions about the device, the technical supervisor at your
company or our employees will gladly assist you.
Sincerely,
EFFEKTA Regeltechnik GmbH

ADIRA 700VA - 3kVA (XL)
Introduction
ADIRA Series
6
1.2 Validity
The descriptions in this operating manual relate solely to the uninterruptible
power supply (UPS) defined in the technical data as a whole or as it refers to
modules, components, and individual parts that were developed and built by
EFFEKTA Regeltechnik GmbH (Chapter 133 Technical data).
Read this documentation carefully and familiarize yourself with the product
before beginning with its operation.
1.3 Storage
The operating manual of this device must be stored in the vicinity of the
device at all times so it is immediately available if needed.
Pass this manual on to any subsequent users of the products.
1.4 Abbreviations, terms and symbols
In this manual, the abbreviation UPS stands for: uninterruptible power supply.
Typically, accumulators are used for energy storage of the UPS device.
Colloquially, these are referred to as battery banks or batteries. A battery
bank is then the term for the centralization of several accumulators into a
group that forms the energy storage.
Labels of Danger, Warning and Attention are explicitly marked with the
respective symbols (pictograms) and must be adhered to without fail. See the
following list and explanations:
Danger / Warning levels / Attention:
Texts marked with “DANGER!” provide a warning about dangers. If accident
prevention measures are not taken, these dangers result in serious
(irreversible) injuries or even death!

ADIRA 700VA - 3kVA (XL)
Introduction
ADIRA Series
7
Texts marked with “WARNING!”provide a warning about hazards. If accident
prevention measures are not taken, these hazards may result in serious
(irreversible) injuries or even death!
Texts marked with “CAUTION!” provide a warning about hazards. If accident
prevention measures are not taken, these dangerous situations may result in
slight or medium reversible injuries.
Texts marked with “ATTENTION!” contain very important instructions for
situations that, if accident prevention measures are not taken, may result in
damage to the product and/or its functions or an object in its vicinity.
This symbol indicates text that contains notices or instructions/comments or
advice.
Warning about danger areas:
General warning about danger areas!
Specific warnings:

ADIRA 700VA - 3kVA (XL)
Introduction
ADIRA Series
8
Warning about dangerous electrical voltage!
Warning about proper handling of accumulators!
Instruction symbols:
Take note of the documentation(s) and/or instructions provided!
Disconnect before operation!
Environmental symbols:
Indicates instructions for recycling.
Indicates components that are subject to the Electronic Swap Regulation.
Indicates components or parts that must be disposed of properly. Do not
dispose of these in the household waste.

ADIRA 700VA - 3kVA (XL)
Introduction
ADIRA Series
9
Text symbols:
●
This dot indicates descriptions of activities that should be carried out.
✓
A requirement that must be fulfilled, for example:
✓The circuit breaker is “OFF.”
–
This dash marks specification lists.

This arrow marks a cross reference.
If a cross reference to another chapter is necessary in the text, this is
shortened for clarity.
Example: OM, 2 Safety Instructions
This means: see Operating Manual,
Chapter 2 Safety Instructions.
If the cross reference refers to a page, figure or position number, this
information is added at the end of the cross reference.
Example: Fig. 4-4, Pos. 1
This means: see (Chapter 4 in this manual) in
Figure 4, position number 1.
(3)
Numbers in brackets refer to the positions in the figures.
**
Annotations within the text are marked with ** and explained accordingly.
1.5 Information obligation
This operating manual must be read and understood by all persons and
qualified personnel working with this device (of the system).
This applies, in particular, to maintenance, operating and cleaning personnel
including persons responsible for transportation and/or disposal.
EFFEKTA Regeltechnik GmbH is not liable for damage incurred or caused by
staff who have not been trained or who have been insufficiently trained.

ADIRA 700VA - 3kVA (XL)
Introduction
ADIRA Series
10
1.6 Warranty conditions
The receipt of delivery is considered to be the record for the initial purchase
and should be kept in a safe place. It will be necessary for making use of the
warranty. If the product is passed on to another user, this user has the right to
the warranty for the remainder of the warranty period. The purchase receipt
as well as this declaration should also be given to the new owner if the device
is passed on.
We guarantee that this device, upon delivery, is in a functional state and
technically conforms to the descriptions in the enclosed documentation.
The warranty period for UPS devices corresponds to the minimum periods
stipulated by law.
This warranty ceases to apply in the following cases:
–if the defect is caused by: freight damage, accident, natural
disasters, misuse, vandalism;
–in cases of improper use, defective maintenance, or incorrect
repair by third parties;
–in the event of changes, unauthorized intervention, improper
operation, false installation, or other modifications we have not
approved;
–in the case of improper use such as the connection of the device
to unsuitable energy sources or unsuitable loads or general use in
an unsuitable environment, etc.;
–in the event of failure to follow instructions in the provided
documentation;
–for any defects caused by a lack of due care, e.g. splash water
etc.;
–in the event that the product is incompatible due to possible
technical innovations or regulations (policies) that occur after the
purchase;
–in the case of malfunctions or damage caused by the connection
of incompatible devices or accessories;
–in the event of developments that are related to the normal ageing
process of the product (wear parts);
–in the event of defects that were caused by external fixtures, e.g.
electrical outlets;
–in the event of failure to provide due maintenance and care for the
product.
The warranty period for replaced and/or repaired parts as part of this warranty
expires together with the original warranty for the product.

ADIRA 700VA - 3kVA (XL)
Introduction
ADIRA Series
11
Devices that are supplied without accessories are replaced without
accessories. The return of the device is only accepted if it is returned in the
original packaging.
Incurred transport costs are generally not included in the warranty.
In general, you shall bear the cost of repair and exchange of the device.
We are not liable for damage or consequential damage, whether caused
directly, unintentionally or by negligence.
EFFEKTA Regeltechnik GmbH provides neither explicit nor implicit
warranties related to this device and its quality, performance, saleability or
suitability for a certain purpose. In some countries, the exclusion of implicit
warranties is not permitted by law. In this case, the validity of all explicit and
implicit warranties is limited to the warranty period. With the expiration of
these periods, all warranties lose their validity. In some countries, a limitation
of the validity period of implicit warranties is not permitted by law so that the
aforementioned limitation will not take effect.
1.7 Limitation of liability
Claims for damage compensation are excluded unless they involve intent or
gross negligence by EFFEKTA Regeltechnik GmbH or its employees. This
does not affect the liability according to the Product Liability Act. Under no
circumstances are we liable for:
–claims that third parties make against you due to losses or
damage;
–loss or damage of your records or data or the costs of recovering
this data;
–subsequent economic damage (including lost profits or savings) or
collateral damage, even in the event we were informed of the
possibility of such damage.
Under no circumstances is EFFEKTA Regeltechnik GmbH responsible for any
accidental, indirect, specific, consequential or other damages of any kind
(including, without any limitation, damages related to a loss of profits,
interruption of business, loss of business information or any other losses) that
result from the use of the device or are in any way associated with the device
whether they are based on the contract, damage compensation, negligence,
strict liability or other claims, even if EFFEKTA Regeltechnik GmbH was
informed of the possibility of such damage in advance. This exemption also
includes any liability that can result from the claims of third parties against the
initial purchaser.

ADIRA 700VA - 3kVA (XL)
Introduction
ADIRA Series
12
In some countries, the exemption or the limitation of collateral or
consequential damage is not permitted by law so that the aforementioned
declaration does not enter into force.
2. Safety instructions
2.1 Introduction
The UPS is a device that has been produced according to the rules and
regulations of technology for an uninterruptible power supply.
The device is safe when used properly and in compliance with the safety
requirements and instructions provided in this operating manual.
2.2 Proper use
The UPS and its related components may only be used for purposes according
to its design for the supply of electrical loads from a primary power source and
for the short-term supply of loads from a secondary power source which do not
exceed the nominal power in its entity.
Any other use is considered improper and can lead to injury or person or
property and/or damage to the device!
The device is not designed for use:
–in explosive;
–in dusty or humid;
–in radioactive or
–in biological or chemically contaminated atmospheres!
For information about the respective IP protection class of the device, please
contact our service centers.

ADIRA 700VA - 3kVA (XL)
Safety Instructions
ADIRA Series
13
In addition, the device class must be taken into account with regard to
“electromagnetic compatibility” (EMC).
This is a UPS device of Class C2, which is designed for use in commercial and
light industry companies. In residential settlements, this can cause radio
interference, and it can be necessary that the operator is required to switch off
the UPS until the problem with radio interference is rectified. This may require
qualified personnel or an organization trained in EMC-related issues.
2.3 Prevention of personal injury / property damage
–Please read this operating manual carefully to familiarize yourself
with the device and its function. Under no circumstances should you
ignore the safety information.
–Pay particular attention to the information on the installation and
initial operation of the device.
–Operate this device only in the proper and appropriate manner and
always within the mandated performance parameters (13
Technical data).
–Perform only the maintenance and service work that is described in
the documentation. Observe the prescribed instruction steps. Use
only original replacement parts from EFFEKTA Regeltechnik GmbH.
2.4 Environmental protection
Return the product to EFFEKTA Regeltechnik GmbH after the end of its
service life. We will ensure that it is disposed of in an environmentally friendly
manner.
2.5 Transport and storage
The UPS can only be transported to the intended location in the original
packaging. The same applies to transfers or returns.
The packaging serves as excellent device-specific protection. Conversely, all
devices damaged during transport must be inspected by EFFEKTA

ADIRA 700VA - 3kVA (XL)
Safety Instructions
ADIRA Series
14
Regeltechnik GmbH before the initial operation. The same generally applies for
any damages to the device.
Should the device be in storage for more than 4 months, charging the battery
bank of the UPS system becomes imperative. For more information, see
4. Storage and unpacking
Due to the possibility of existing energy storage (accumulators) within a UPS,
devices must generally be inspected by EFFEKTA Regeltechnik GmbH or a
qualified service center for transportation damages. Overall, transport damages
present a high risk that the energy storage units and/or their electrical
connections have been affected. As a result, short circuits and/or the leaking of
electrolytes cannot be ruled out. For this reason, the unit must be isolated until
an inspection has been performed.
Furthermore, the UPS device should not be transported or stored in an upside-
down position.
2.6 Positioning
Operate the UPS only in well-ventilated rooms, observing the specified ambient
temperature range (according to 133 Technical data).
The UPS should not be placed in the vicinity of heat sources.
Always take the operating conditions into account when positioning the device.
Maintain the required minimum distance to adjacent equipment and walls for
ventilation purposes (see 133 Technical datand 5 Installation and
connection of the UPS). Ensure that the necessary air circulation is provided.
Never place the device in a damp environment. Liquids must, as a rule, be kept
away from the UPS device.
Due to major temperature differences, the formation of condensation may occur
after the positioning of the UPS. Therefore, an acclimatization period of at least
two hours must be observed before any further steps are taken. Make sure the
temperature adjustment has been completed and that any internal and external
surfaces of the devices with condensation have dried completely.
Never operate the UPS in an explosive and/or unventilated setting.

ADIRA 700VA - 3kVA (XL)
Safety Instructions
ADIRA Series
15
2.7 Connection
Always use the connection terminals provided for the purpose of connecting the
UPS.
To avoid electrical hazards, the connection of the device must only be made
under de-energized conditions.
The PE (protective earth) conductor must be connected without fail. The UPS
device, as well as the connected loads, must not be used under any
circumstances without the PE conductor!
The UPS output is supplied with power even in the event of a power outage;
according to the provisions covered in EN62040-1, the lines and power outlets
supplied by the UPS must be clearly labelled!
In addition, the following points must always be observed when connecting the
UPS:
–Install all connections properly and keep the cable length as short as
possible;
–Only use suitable power cables when connecting the UPS to the
mains power supply and pay attention to the required current
carrying capacity;
–Only use suitable power cables when connecting loads or appliances
to the UPS and pay attention to the required current carrying
capacity;
–The safeguarding of any load must always be performed immediately
in front of a load and should never be performed centrally in front of
the UPS;
–Never operate any household devices or tools such as, e.g. fan
heaters, vacuum cleaners, electric drills, hairdryers, toasters, etc., by
means of the UPS;
–Do not connect any loads or appliances to the UPS that could
overload the device;
–In general, only use appropriate tools for the installation.

ADIRA 700VA - 3kVA (XL)
Safety Instructions
ADIRA Series
16
2.8 Operation
Only qualified personnel are permitted to access and operate the device.
In all situations, it must be kept in mind that the UPS includes an energy storage
unit or is connected to an external energy storage unit. This means that the UPS
outlet could be carrying a current even when the UPS has already been
disconnected from the mains power supply.
Consequently, the UPS output is guaranteed to be de-energized only when the
device has completely shut down and has been disconnected from the mains
power supply.
2.9 Working with accumulators
When handling accumulators, there is always a risk of electric shock, burns and/or
chemical burns.
For this reason, unauthorized personnel should not have access to
accumulators.
Accumulators and their connections can cause electric shock.
In the event of a short circuit of the accumulators, touching the current-carrying
parts can result in severe burns.
Do not place accumulators in the vicinity of heat sources and do not allow them
to come into contact with open flames. Risk of explosion!
Accumulators should never be opened or destroyed. The electrolyte released is
very hazardous to your health and the environment. It could result in chemical
burns of skin and eyes; additionally, the electrolyte is very toxic.
Defective accumulators must be disposed of in an environmentally friendly
manner!
Never dispose of accumulators with regular household waste!
Local disposal regulations must be observed!

ADIRA 700VA - 3kVA (XL)
Safety Instructions
ADIRA Series
17
2.10 Maintenance, service and malfunctions
Attention—risk of electric shock.
Even after switching off the power supply via the power button or after
disconnecting the accumulator feed, parts of the UPS could still be carrying high
voltages.
The following precautions must be taken when working on the UPS and the
accumulators:
–Before beginning work on the UPS, it must first be switched off and
disconnected from the mains power supply and the loads;
–Remove wristwatches, jewelry, and other metallic objects;
–Only use isolated tools;
–Work on live equipment must only be performed by specially trained
personnel. These persons must wear the appropriate personal
protective equipment (PPE) at all times;
–The UPS may not be disassembled;
–Work on the accumulators must only be carried out and supervised
by personnel with the required expertise concerning safety
regulations;
–Unauthorized personnel are to be kept away from the UPS and the
accumulators.

ADIRA 700VA - 3kVA (XL)
Device Description
ADIRA Series
18
3. UPS device description
This UPS device is an ONLINE UPS according to the double conversion
principle. Based on the outstanding performance in compliance with EN 62040-
3, the UPS is classified as (VFI-SS-111). This allows for subsequently
connected appliances to be optimally supplied, entirely irrespective of how the
primary power source (mains power supply) behaves.
Malfunctions such as: mains power failure, power supply undervoltage, power
supply overvoltage, temporary mains voltage changes (transients), subtle mains
voltage deviations, frequency changes, etc., will not be transferred to the
connected loads in standard and autonomous operating modes.
The UPS is used for the support of sensitive devices and systems, such as e.g.:
computers, servers, emergency systems, electronic cash registers, instruments
critical to operation, telecommunications systems, processor control systems,
surveillance and management systems, etc.
The ADIRA series contains an internal battery bank as well as a secondary
power source. A possible extension of the autonomous times occurs through
the adaption of an external battery bank or its capacity. If very high autonomous
times (capacities) are required, a reversion to the XL device variants must take
place because these variants supply a considerably higher charging current.
3.1 Topology and operating modes
The following figure (Fig. 3-1), a block diagram of the UPS device, clearly
shows the double conversion principle. The mains power supply is converted to
the DC intermediate circuit whereby the energy storage unit (battery bank) will
be charged. The loads, or appliances, on the UPS output are supplied by an
additional conversion (INVERTER) without failures or interruptions.
Fig. 3-1 Topology, function groups for the UPS device.
It is clear that, within the mains power supply, failures do not extend to the UPS
output and, consequently, the loads. Furthermore, all operating modes of the
UPS device can be derived from and represented by the block diagram
presented above:

ADIRA 700VA - 3kVA (XL)
Device Description
ADIRA Series
19
Standard operation mode (INVERTER MODE)
The standard operation mode is characterized here by a classic double
conversion. The supply network is converted to the DC intermediate circuit
which then feeds the UPS output through an inverter (DC/AC converter). The
bypass is inactive here.
Fig. 3-2 Operating mode: Standard operation.
Support or autonomous mode (BATTERY MODE)
In the event the supply network temporarily fails, the inverter draws power
directly from the battery bank and thereby supplies the UPS output without
interruption. The battery mode is limited by the capacity of the battery bank and
its charging status.
Fig. 3-3 Operating mode: battery mode.

ADIRA 700VA - 3kVA (XL)
Device Description
ADIRA Series
20
Static bypass operating mode (FAULT MODE)
Often, in the case of a device fault (fault mode) within the inverter, the UPS
automatically switches to the static bypass operating mode without interrupting
the UPS output. In doing so, the load feed is securely maintained over the
power supply, albeit without the support function of the UPS. Once the fault has
been eliminated, the device returns to the standard operation mode.
Malfunctions can also be caused by the loads when, for example, the UPS is
overloaded.
Fig. 3-4 Operating mode: static bypass.
Never leave the UPS in the static bypass mode, or the fault mode, for an
extended period of time. The loads will continue to be supplied but without any
support function from the UPS.
The static bypass mode can also be intentionally switched on, e.g., for
screening.
Power-saving mode (ECO MODE)
The “power-saving mode,” called the ECO MODE, is a unique feature of the
ADIRA series. The UPS device is intentionally operated in the static bypass
mode for this purpose. In this case, the inverter remains inactive but operation
ready whereby the UPS consumes considerably less power (LINE
INTERACTIVE). The device automatically converts to autonomous mode only
in the event of power failures/faults. However, the use of the ECO MODE is
only sensible when the loads are “robust” devices which have low tolerance for
switching and power supply fluctuations while in the bypass mode.