egton Sunvisor Bluetooth Handsfree Car Kit User manual

EGTfNG
Sunvisor Bluetooth Handsfree Car Kit
Chinese,English and Spanish Voice report
User Manual

1 About Bluetooth Speakerphone
This portable mini-shape Bluetooth speakerphone is specially designed to give you
convenience and freedom of wireless communication, which can be used as hands-free
car kit when you are in car or as conference Speakerphone on desk-top when you are at
home, office, etc With advanced built-in microphone which adopts D S P solution for
Echo Cancellation & Noise Suppression, this speakerphone creates an outstanding full
duplex sound quality for you
2 About Bluetooth Technology
Bluetooth wireless technology is set to revolutionize the personal connectivity by
providing freedom from wired connections-enabling links and connectivity between
notebook/laptop, mobile phones, portable handheld devices and other Bluetooth enable
Devices meters • it inin,GISMtra smissi nM dgtaldat & Utiliz ng lobal sound , it
makes global communication in the way you are never dreamed of!
3 Appearance and function
(1) Microphone
(2) Volume Down
(3) Volume Up
(4) Speaker
(5) Audio transfer
(6) On/Off/Pairing/End
(7) Answer/Voice dial
(8) Blutooth Indicator
(9) Back clip
(10) Charger Port
(11) Magnet
4 Charging the Battery
The product with built-in rechargeable battery can be charged random by the equipped
charger To use your Bluetooth speakerphone for the first time, please charge the
__ e^s-
О

speakerphone fully
(1) Prior to using the speakerphone, it is recommended to charge the battery fully for
the first time Normal fullcharging time is 3 hrs (Approx)
(2) While charging, the Red LED Indicator will light up, after charging finished, the
Red LED Indicator will be off and voice report "Power off'
Important Notice:
(1) Charging indication will be delayed for a few minutes if the
speakerphone has not been used fora longtime or the battery is
drained
(2) To prolong durability of battery and ensure the stability of
Speakerphone's functioning, it's recommended to charge the
speakerphone immediately whenever low battery voltage appeare-
thered LED will flash on every 3 seconds It will shutdown soon
under very low battery condition
(3) The red LED will flash every 3 seconds whenever the battery low and
turn off in 30 seconds
5 Power On/off the Speakerphone
Power on: Press and hold the "On/Off" button for 6 seconds until you hear a short beep,
then the blue LED indicator will be on and flash 5 times, voice report the "Power on"
Power off: In standby mode, press and hold the “On/OfTbutton for 6 seconds until you hear
three beep sound and red LED flash 3 times,also voice reporf’Power off1
6 Pairing
Automatic or manual connection after searching will apply to the mobile phone's
configuration Prior to use the speakerphone for the first time, you must pair it manually
with Bluetooth-enabled mobile phones The paring process is as following:
(1) Place the speakerphone and mobile phone no farther than 1 meter apart
(2) Ensure the speakerphone is under OFF mode
(3) Press and hold the “On/Off” button for 6 seconds until you hear voice
report"Ready to pair", The LED indicator will flash between redand bluealternately lt is
now ready for pairing
(4) Activate your mobile phone's Bluetooth function and search for available
Bluetooth devices by referring to your mobile phone user manual for details
(5) Select "ВТ Speaker “from the list
(6) Enter the pre-programmed code"0000" to pair the mobile phone with the
speakerphone When pairing is completed, you may hear a long beep and blue LED
indicator will flash slowly for3 times, it means successful paring,also the voice repprt
"Phone 1 connected", then the speakerphone will goto standby mode, the blue LED
indicator will flash every 3 seconds
(7) Ensure your speskerphone and mobile phone is placed within 10meters-Bluetooth
sensing distance,and there is no much interference around
Pair the second phone: m

The Bluetooth speskerphone allow to match two cell phone at the same time, please refer
the follow steps to pairing
(1) After the first cellphone pairing successfully, please turn off the speakerphone then
turn on it
(2) Please pairing for the second cellphone as the above steps, after the second
cellphone pairing successfully voice reporf'Phone 2 connected"
IMPORTANT NOTICE:
During the paring process , if you can not get successful paring within 2 minutes, the
speakerphone will power off Please repeat the above steps to pair again
Automatically re-connection between Speakerphone and Mobile Phone
(1) The speakerphone will automatically connect to the mobile phone matched last
time;
(2) When the speakerphone is power off, or the connected mobile phone is more
than 10 meters away from the speakerphone, they will be out of connection
automatically and voice reporf'Phone 1&2 disconnected"
(3) Once the speakerphone is power on again within 10 meters away from the
paired mobile phone, their connection will be rdbuilt automatically There
will be a report to indicate this successful re-connection from the
speakerphone
(4) Otherwise,the speakerphone will power off automatically after 10 minutes'
disconnection (Automatic or manual connection will apply to the mobile phone's
configuration )
(5) You may want to connect your speskerphone with another Bluetooth phone
Select"disconnecting" to remove connection from your phone list,as a result, the
speakerphone will disconnect with its pre-paired phone and voice report
"Phone 1 disconnected",
Notice: When losing the connecting, the blue LED indicator will blink shortly and quickly,
then the speakerphone will power off automatically after 10 minutes
7 Using the Speakerphone
a Ensure your speakerphone and mobile phone is placed within 10meters-Bluetooth
sensing distance
b After successful Bluetooth connection,any incoming or outgoing call will automatically
connected to this speskerphone first, you can operate your mobile phone and transfer
back to mobile phone
Once pairing is completed and battery is fully charged, the follow functions would be
available for you:
(1) Making a call:
You can initiate calls from your mobile phone, or directly from this speakerphone using
voice dialing commands (If this feature is supported by your mobile phone)

Making a call from your mobile phone
Dial directly from Bluetooth-connected mobile phone, the outgoing call will automatically
connect to this speakerphone and with voice report"Out going call 1"
Voice-dialing:
Ensure your mobile phone can support the voice dialing function and you hed set it
before you use this function In standby mode, short press the "Answer" button to activate At
this time,the voice dialingfunction in mobile phone will be automatically activated please
speak out the name of your expected toward the microphone, (Please refer to mobile
phone's user manual)
Caution: only apply to the mobile phone with function configuration of voice dialing
(2) Answering a call:
Whenever there is an incoming call, or receive the call via your mobile phone in the
normal way
Once the call coming,the speakerphone will ring when the call is coning, short press the
"Answer" button to receive call If the phone is set under auto-answering mode, the user
needn't press"Talk"to access calls It’ll bediverted to speakerphone automatically
(3) Ending a call:
During talking status,if you want to end this call,just short press the "On/Off'button once to
end the call or end the call via your mobile phone in the normal way
(4) Reject a Call:
Whenever you would like to reject an incoming call,press and hold the "End" button for 3
seconds
(5) Last Number Re-dialing:
Under standby mode, short press "Answer" button twice for the last number redialing with
voice report "Out going call 1"
(6) Adjusting the Volume:
Once the speakerphone is paired with the mobile phone, press the "volume+"
or "volume-"button repeatedly until it reach the proper volume level and ovice report
"Volume highesfor” Volume lowesf'once arrived to the limitation
(7) Conversation switch between speskerphone and the mobile phone
A From speakerphone to mobile phone:
When the conversation is in progress through the Spearkphong,press the “Audio transfer"
buttonactivate, then the conversation will be switched from the speakerphone to the
mobile phone,press the “Audio transfer" button again,the conversation will be switched
from the mobilephone to speakerphone
Remark: This function is not available for all Bluetooth-enabled device;it depends on the
compatibility of the paired device
8 Disconnection
You may disconnect the Speakerphone from your mobile by powering off the
Speakerphone or select:BT Speaker “on you phone and disconnected
In case of disconnection from the mobile phone when the Speakerphone is on,the
speakerphone will be shut down automatically after 10 minutes
&
14 Care and Maintenance
(1) Do not expose the speakerphone to liquid, moisture or humidity, as it is not water
proof
(2) Do not use abrasive cleaning solvents to clean the speakerphone
(3) Do not place the speakerphone in high temperature, as it may result in an
explosion
(4) Do not expose the speakerphone to contract with sharp objects as this will
cause scratching and damage
(5) Do not attempt to disassemble the speakerphone, as it does not contain
serviceable components
(6) If you do not use the speakerphone for the longtime, be sure to store it in a dry
place, free extreme temperature, humidity and dust
15 Safety Information
(1) Check local laws regarding use of a mobile phone and speakerphone while
driving If you use the speakerphone while driving, ensure your attention and
focus remains on your responsibility of driving safety
(2) Never allow children to lay with the speakerphone Small parts may be a
choking hazard
(3) Observe all signs that require an electrical device or RF radio product to be
switched off in the designated areas These could include hospitals, blasting
areas, and potentially explosive atmosphere
(4) Turn off your speakerphone prior to boarding an aircraft Do not use your
speakerphone in an aircraft
(5) Never place orstore the speakerphone over the area of the automobile's safety
airbag deployment,or it may cause serious injury when a safety airbag deploys
16 Troubleshooting
If you are unable to connect the speakerphone and mobile phone,please try as follows:
(1) Ensure the speakerphone is paired with your mobile phone
(2) Ensure your mobile phone's Bluetooth feature is activated Please refer to
your mobile phone user guide for specific instruction
(3) Ensure the speakerphone is within a maximum of 10 meters of your mobile
phone(s) and there are no obstructions, such as wall or other electronic device in
between as it may cause shorter of imterference transmission
(4) If all the above steps do not resolve your problem, please remove your
battery for a while
The Bluetooth speakerphone is compliant with and adopts the Bluetooth Specification 2 0
However,interoperability between the device and other bluetooth-enable products is not
guaranteed because it depends on compatibility For more infomation on the
compatibility between the device and other Bluetooth-enabled products, please check
with the manufacture/importer
©
9 Conversation from second phone
After connected with two phone at the same time,the first connected one is primary
phone that can usb"Answer" button for voice dial and redial
Note:The other function refere above operation step of first phone
10 Voice report selection
This device with three language report the different state,there are Chinese,English and
Spanish To exchange the language,press "End" button for 3 seconds will be report
3 language one by one,if you need the English voice,once you head the English report
and tell you press the"Answer" button to confirm,then will be change into English report
For select the Chinese and Spanish follow the same operation
11 Restore to Default settings-Remove Previous Pairing & Connection
To reset the speakerphone with its default settings and clear the previous pairing
information,please take the following steps
(1) Ensure the speakerphone is under standby mode
(2) Press and hold the volume+ and Volume- buttons simultaneously for 5 seconds until
blue & red LED indicators flash alternately Then release the Buttons and the Speaker
phone back too oiginal setting and after power on the speakerphone again,it will enter
pairing mode automatically
12 Lower voltage protection of battery
When the voltage of battery decreased to 3 3V,the red LED will flash in every 3 seconds
and the speakerphone will be power of automatically when the voltage under 3 0V
13 LED indication
17 Product specifications
Bluetooth Specifications Version30, Class2,10meters
Bluetooth profile supported Speakerphone & Hands-free profiles
Operating Frequency Band 2 4Ghz to 2 48GHz unlicensed ISM band
Rechargeable Battery 3 7VDC,650mAH
AD/DC Charger DC5 to 6V,400mA
Normal Charge Time up to 3hrs (approx)
Talking time upto20hrs
Standby Time up to 10OOhrs
Dimension Bluetooth Speakerphone: L12 9cm*W4 9cm*H1 4cm
Weight Bluetooth Speakerphone: 64g
Note: The above configuration may change or upgrade according to the product
development plan without any prior notice
Blue LED Sound Voice report
Off Mode Off Off
Power On On for 3 sec Short beep yes
Standby before Pairing Flash on every 6 sec
Standby after Pairing Flash on everv 3 sec yes
standby low Voltage Flash on every 3 secretary
Talking in progress Flash on every 6 sec yes
Pairing in Progress Flash on alternately
Pairing Completed Flash on every 3 sec short beep yes
Privacy Handset Steady on
Charging In Progress Steady on
Off ON