Directed DS4+ User manual

CHRYSLER12
INSTALLATION GUIDE
This product is intended for installation by a professional installer only! Attempts to install this
product by a person other than a trained professional may result in severe damage to a vehicle’s
electrical system and components.
2017-11-15
© 2017 Directed, Vista CA
DS4+
Designed by Installers for Installers

Contents
Warning! Safety first ....................................................................................................................... 3
Introduction .................................................................................................................................... 4
Pre-installation and application warnings ..................................................................................... 4
Vehicle application guide........................................................................................................... 5
Wiring connections ......................................................................................................................... 6
Main harness (H1), 12-pin black connector .................................................................................. 6
Relay harness (H2), 10-pin white connector.................................................................................. 6
Data harness (H3), 8-pin white connector..................................................................................... 6
Analog input/output harness (H4), 22-pin white connector............................................................. 7
RF Port harness (H5), 2-pin white connector.................................................................................. 7
D2D harness (H6), 4-pin white (1) and black (2) connectors ........................................................... 7
Temperature sensor harness (H7), 2-pin black connector (optional, 8556T)....................................... 7
Installation (wiring diagrams, fuse selection & vehicle wiring reference charts)........................................ 8
Type 1 ..................................................................................................................................... 8
Type 2 ................................................................................................................................... 10
Type 3 ................................................................................................................................... 12
Type 4 ................................................................................................................................... 14
Type 5 ................................................................................................................................... 16
Key2GO...................................................................................................................................... 18
Configuring the system................................................................................................................... 18
Important! .............................................................................................................................. 18
Vehicles equipped with a manual transmission ............................................................................ 18
RF Systems ............................................................................................................................. 18
8504D Combo Sensor............................................................................................................. 18
When used in conjunction with SmartStart.................................................................................. 19
D2D port configuration ............................................................................................................ 19
Module programming.............................................................................................................. 19
LED diagnostics and troubleshooting.......................................................................................... 21
Soft reset................................................................................................................................ 23
Hard reset .............................................................................................................................. 23
Learning the Tach (not needed with Virtual Tach) ............................................................................... 24
Initializing Virtual Tach (not needed with hardwired or data tach applications) ..................................... 24
Limited lifetime consumer warranty .................................................................................................. 25
Quick Reference Guide.................................................................................................................. 26

Warning! Safety first
The following safety warnings must be observed at all times:
• Due to the complexity of this system, installation of this product must only be performed by an authorized Directed dealer.
• When properly installed, this system can start the vehicle via a command signal from the remote control. Therefore, never
operate the system in an area that does not have adequate ventilation.
The following precautions are the sole responsibility of the user; however, authorized Directed dealers should:
• Never use a test light or logic probe when installing this unit. Always use a multimeter.
• Never operate the system in an enclosed or partially enclosed area without ventilation (such as a garage).
• USER MUST INSTALL A CARBON MONOXIDE DETECTOR IN OR ABOUT THE LIVING AREA ADJACENT TO THE VEHICLE.
ALL DOORS LEADING FROM ADJACENT LIVING AREAS TO THE ENCLOSED OR PARTIALLY ENCLOSED VEHICLE
STORAGE AREA MUST REMAIN CLOSED AT ALL TIMES.
Use of this product in a manner contrary to its intended mode of operation may result in property damage, personal injury, or
death. Except when performing the Safety Check outlined in this installation guide, (1) Never remotely start the vehicle with
the vehicle in gear, and (2) Never remotely start the vehicle with the keys in the ignition. The user is responsible for having the
neutral safety feature of the vehicle periodically checked, wherein the vehicle must not remotely start while the car is in gear.
This testing should be performed by an authorized Directed dealer in accordance with the Safety Check outlined in this product
installation guide. If the vehicle starts in gear, cease remote start operation immediately and consult with the user to fix the problem
immediately.
OPERATION OF THE REMOTE START MODULE IF THE VEHICLE STARTS IN GEAR IS CONTRARY TO ITS INTENDED MODE OF
OPERATION. OPERATING THE REMOTE START SYSTEM UNDER THESE CONDITIONS MAY RESULT IN PROPERTY DAMAGE
OR PERSONAL INJURY. IMMEDIATELY CEASE THE USE OF THE UNIT AND REPAIR OR DISCONNECT THE INSTALLED REMOTE
START MODULE. DIRECTED WILL NOT BE HELD RESPONSIBLE OR PAY FOR INSTALLATION OR REINSTALLATION COSTS.
Remote starters for manual transmission pose significant risks if not properly installed and operated. When testing to ensure the
installation is working properly, only remote start the vehicle in neutral gear, on a flat surface and with a functional, fully engaged
parking brake. Do not allow anyone to stand in front of or behind the vehicle.
This product should not be installed in any convertible vehicles, soft or hard top with a manual transmission. Installation in such
vehicles may pose certain risk.
3DS4+ CHRYSLER12
© 2017-11-15 Directed. All rights reserved.

Introduction
The CHRYSLER12 firmware for DS4+ is compatible with specific Fiat and Dodge/RAM vehicles. It is a
complete solution for remote start, security (when security features are enabled), bypass, and features built
in Bluetooth 4.0 allowing you to configure and control your system. This guide provides information on the
installation of the module using CHRYSLER12. Please refer to the DirectLink application or www.directechs.com
for more information about which configuration is best for your application.
Warning! This module is designed to be configured using the DirectLink application for mobile devices, however it can also
be configured using the web tool located at www.directechs.com. To download the DirectLink mobile application, please visit the
Google Play or Apple store.
Pre-installation and application warnings
Firmware notes: This section highlights important information for this specific firmware and will assist in
pricing accordingly, as well as bringing awareness to any operational or vehicle limitations.
T-Harness
compatible
Keys required for
programming 1Keys required for operation 0
Compatible with CHRYSLER12 1.14+.
Important: The firmware does not control the OEM alarm. Remove the battery in the OEM remote to prevent the vehicle
from arming. The vehicle’s OEM alarm will no longer be functional. The installation of a hybrid system (remote starter and
alarm combo) is highly recommended to preserve vehicle security.
Key2GO is mandatory to control the immobilizer override in this firmware.
Unless specified otherwise, all connectors are displayed from the wire side, with the exception of the OBDII diagnostic
connector.
It is important to check that the fuses are positioned correctly in the module. Proper fuse positioning is displayed on each
wiring diagram.
Refer to the "Vehicle wiring reference chart" following each installation type.
General notes: This section highlights important information for this specific firmware.
[1] The installation of an aftermarket hood pin is ONLY required on vehicles that are NOT equipped with a factory hood pin.
[2] The siren is ONLY required when enabling the security features during module flashing.
[3] This connection is ONLY required if vehicle takeover or Pit Stop mode is desired.
[4] The Green wire is ONLY required for starter kill and anti-grind connections.
Additional parts required (maximum required):
Diode 6A
0 x 1A Diodes 86 85
30
87a
87
0 x Relay
Resistor 100Ω
2 x 1K ΩResistor
Fuse 7.5A
0 x Fuse
4DS4+ CHRYSLER12
© 2017-11-15 Directed. All rights reserved.

Vehicle application guide
The following table lists the vehicles and features which are compatible with this product. The number assigned to each year
allows you to determine which installation type should be used for your vehicle.
Vehicles
2017 2016 2015 2014 2013 2012 PK-Immobilizer Bypass-Data No Key Req'd DL-Door Lock Control DL-Door Unlock DL-Trunk / Hatch Release Key2GO RS-SmartStart RS-Tach / RPM Output SS-Entry Monitoring ALL Door Pins SS-Entry Monitoring Trunk/Hatch Pin ST-Brake Status (foot brake) ST-E-Brake Status ST-Ignition Status
Dodge/Ram
ProMaster (Diesel)
444
••••••••••••
ProMaster (Gas) 3333 ••••••••••••
ProMaster City
5 5
••••••••••••
Fiat 17 16 15 14 13 12
500 11111••• ••••••••
500 Turbo 11111••• ••••••••
500C 11111••• ••••••••
500L 222 ••• ••••••••
Legend:
DL: OE Door Lock & Alarm Controls
PK: Transponder & Immobilizer Override
RS: Remote Start & Engine Controls
SS: Integrated Security & Monitoring
ST: Function/Feature Status
5DS4+ CHRYSLER12
© 2017-11-15 Directed. All rights reserved.

Wiring connections
The wiring connections listed below are specific to this firmware.
Main harness (H1), 12-pin black connector
Conn./Pin Color Description
H1/1 Blue/White Relay 1 N.C. – Door Lock Interrupt (vehicle side) 1
H1/2 Blue/Red Relay 1 N.O. – (-) Ground Input 1
H1/3 Blue Relay 1 COM – Door Lock Interrupt (conn.side) 1
H1/4 White/Brown Relay 3 N.C. – No Connection 1
H1/5 White Relay 3 N.O. – No Connection 1
H1/6 Red (+) 12V Input
H1/7 Lt. Green/Red Relay 2 N.O. – (+)12V Input 1
H1/8 Lt. Green Relay 2 COM – Key Release Interrupt (conn.side) 1
H1/9 Lt. Green/White Relay 2 N.C. – Key Release Interrupt (vehicle side) 1
H1/10 Black (-) Ground
H1/11 White Relay 3 N.O. – No Connection 1
H1/12 Red (+) 12V Input
Relay harness (H2), 10-pin white connector
Conn./Pin Color Description
H2/1 N/A No Connection
H2/2 Red/Black (+) 12 Volt Input (Accessory/Starter relay)
H2/3 Pink/Black Relay N.C. – Flex Relay Isolation 1
H2/4 Pink/White Relay COM – Flex Relay Output 1
H2/5 Red (+) 12 Volt Input (Ignition relay)
H2/6 Green Relay COM – (+) Starter Disable (key side) 1
H2/7 Violet Relay N.C. – (+) Starter Output (vehicle side) 1
H2/8 Orange Relay COM – (+) Accessory Output 1
H2/9 Red/White (+) 12 Volt Input (flex relay)
H2/10 Pink Relay COM – (+) Ignition Output
Data harness (H3), 8-pin white connector
Conn./Pin Color Description
H3/1 Tan HS CAN Low
H3/2 Tan/Black HS CAN High
H3/3 Orange/Brown MS CAN Low
H3/4 Orange/Green MS CAN High
H3/5 Lt. Green Single Wire CAN or J1850
H3/6 Violet/Brown (MUX) Analog Input/Output
H3/7 Orange/Black ISO BUS 2
H3/8 Yellow/Black ISO BUS 1
1. If these outputs are not used by the firmware, they can be configured by the installer when the module is flashed.
6DS4+ CHRYSLER12
© 2017-11-15 Directed. All rights reserved.

Analog input/output harness (H4), 22-pin white connector
Conn./Pin Color Description
H4/1 Lt. Green/Black (-) Factory Alarm Arm (FAA) Output 1
H4/2 Blue/White (-) Ground When Running (status) Output 1
H4/3 Dk. Green/Black (-) Lock Output 1
H4/4 Red/White (-) Rear Door/ Trunk Unlock Output 1
H4/5 Brown/Black (-) Horn Output 1
H4/6 Brown/White (-) RAP Off Output 1
H4/7 White No Connection 1
H4/8 Violet/Black (+) Brake Output 1
H4/9 Dk. Blue/Black (-) Door Unlock Output 1
H4/10 Lt. Blue/Black (-) Parking Light Output 1
H4/11 Brown/Red (+) Siren Output 1
H4/12 Pink (+) Ignition Sense Input
H4/13 Violet (+) Door Input 2
H4/14 Brown (+) Brake Input 2
H4/15 White/Blue (-) Activation Input 2
H4/16 Red/Blue (-) Valet Switch 2
H4/17 Black/White (-) E-Brake Input (manual transmission) 2
H4/18 Orange/Black (-) Instant Alarm Input 2
H4/19 Blue (-) Trunk Input 2
H4/20 Green (-) Door Input 2
H4/21 Gray (-) Hood Pin Input 2
H4/22 Violet/White (AC) Tach Input
RF Port harness (H5), 2-pin white connector
Conn./Pin Color Description
H5/1 N/A RF Loop
H5/2 N/A RF Loop
D2D harness (H6), 4-pin white (1) and black (2) connectors
Conn./Pin Color Description
H6/1 Blue (Data) TX
H6/2 Black (-) Ground
H6/3 Green (Data) RX
H6/4 Red (+) 12 Volt
Temperature sensor harness (H7), 2-pin black connector (optional, 8556T)
Conn./Pin Color Description
H7/1 Black Temperature Sensor
H7/2 Black Temperature Sensor
1. If these outputs are not used by the firmware, they can be configured by the installer when the module is flashed. Note that they are low current and a relay
may be necessary.
2. These connections are only required if the corresponding statuses are not supported by the firmware. See "Vehicle application guide" on page 5 for a
list of compatible features. If these outputs are not used by the firmware, they can be configured by the installer when the module is flashed. Note that they
are low current and a relay may be necessary.
7DS4+ CHRYSLER12
© 2017-11-15 Directed. All rights reserved.

Installation (wiring diagrams, fuse selection & vehicle wiring reference charts)
Type 1
Refer to "Pre-installation and application warnings" on page 4 for important information, such as the description of special notes referenced in the diagram ( ).
(-) Ground Input: Blue/Red: 2
Door Lock Interrupt (vehicle side) : Blue/White: 1
Door Lock Interrupt (conn. side): Blue: 3
(-) Ground: Black: 10
HS CAN Low: Tan : 1
HS CAN High: Tan/Black: 2
MS CAN High: Orange/Green: 4
MS CAN Low: Orange/Brown: 3
Siren
Hood Pin
(+) 12V Input: Red: 6 &12
(-) Hood Input: Gray: 21
(+) Siren Output: Brown/Red: 11
OBDII Plug
Black Connector
Parking Lights
(gray conn. at headlight switch)
C-CAN Low:
Brown, pin 14
C-CAN High: Green, pin 6
B-CAN Low:
White, pin 9
B-CAN High: Blue, pin 1
(-) Parking Lights
Yellow/Black, pin 3
White 3-pin conn.
(at ignition switch)
(+) Accessory:
Gray, pin 1
(+) Ignition 1:
Dk.Blue, pin 2
4
3
2
1
White 3-pin conn.
(at ignition switch)
(+) Ignition 2: Orange, pin 1
(+) 12V: Red/Dk.Green,pin 2
(+) Starter:
Brown, pin 3
1
3
9 8 7 6 5 4 32 1
Black & Blue 60-pin conn.
(BCM/ Dash Fuse box)
(MUX) Door Locks: Violet/Red, pin 51
46
1
15
60
CUT
(+) Key Release
Brown/Orange,pin 2
1
2
CUT
(-) Unlock Output: Dk.Blue/Black: 9
(-) Parking Lights Output: Lt.Blue/Black: 10
Key Release Switch
(at key cylinder)
16
8
9
1
(+) Ignition 1 Input/Ouput: Pink: 10
(+) Fused (30A) Ignition 2/ Flex Relay Input: Red/White: 9
(+) 12V Input: Red: 5
(+) Ignition 2/Flex Relay Output: Pink/White: 4
(+) Accessory Output: Orange: 8
(+) 12V Input: Red/Black: 2
(+) Starter Output (Car Side): Violet: 7
Starter Input (Key Side): Green: 6
Key Release Interrupt (conn.side): Lt. Green: 8
Key Release Interrupt (vehicle side): Lt. Green/White: 9
Resistor 1ΚΩ
(+)12V Input: Lt. Green/Red: 7
BCM /Dash Fuse box
22 810 12
4 2442
DS4+
DS4
Slide
to open
Proper Fuse
Positioning
DS4+ DS4
It is important to check that the
fuses are positioned correctly.
MAIN (5A) (+)
(-) RLY3 PK LIGHT (15A) (+)
(-) ACC & START (30A) (+)
(-) FLEX RLY (20A) (+)
IGN (20A) (+)
MAIN (5A) (+)
(-) RLY3/PK LIGHT(15A) (+)
5
30
20
20
5
8DS4+ CHRYSLER12
© 2017-11-15 Directed. All rights reserved.

Vehicle wiring reference chart
This section provides vehicle wiring information to guide you through the various stages of your installation. Refer to
www.directechs.com for additional information.
Wire Information Connector Information
Function Color Pin Polarity Location Color Pins Ref.
Fiat 500/ Fiat 500 Turbo/ Fiat 500C 2012-2016
C-CAN High Green 6 Data OBDII diagnostic connector. Black 16 A
C-CAN Low Brown 14 Data OBDII diagnostic connector. Black 16 A
B-CAN High Blue 1 Data OBDII diagnostic connector. Black 16 A
B-CAN Low White 9 Data OBDII diagnostic connector. Black 16 A
12V Red/Dk.Green 2 (+) Ignition switch. White 3 B
Starter Brown 3 (+) Ignition switch. White 3 B
Ignition 2 Orange 1 (+) Ignition switch. White 3 B
Ignition 1 Dk.Blue 2 (+) Ignition switch. White 4 C
Accessory Gray 1 (+) Ignition switch. White 4 C
Key Release Brown/Orange 2 (+) At key cylinder. White 2 D
Parking Lights Yellow/Black 3 (-) Headlight switch. Gray 9 E
Door Locks Violet/Red 51 MUX BCM/dash fuse box. Black &
Blue 60 F
9DS4+ CHRYSLER12
© 2017-11-15 Directed. All rights reserved.

Type 2
Refer to "Pre-installation and application warnings" on page 4 for important information, such as the description of special notes referenced in the diagram ( ).
16
8
9
1
Siren
Hood Pin
OBDII Plug
Black
Connector
C-CAN Low:
Brown, pin 14
C-CAN High: Lt.Green, pin 6
B-CAN Low:
White, pin 9
B-CAN High: Dk.Blue, pin 1
Green 60-pin conn.
(BCM/Dash Fuse box)
(+) Accessory:
Dk.Blue/Lt.Green
or Gray, pin 1 (+) Ignition 1:
Dk. Blue, pin 2
46
1
15
60
Key Release Switch
(at key cylinder)
(+) Key Release:
Brown/Orange, pin 2
1
2
Black 2-pin conn.
(at ignition switch)
12
HS CAN Low: Tan: 1
HS CAN High: Tan/Black: 2
MS CAN High: Orange/Green: 4
MS CAN Low: Orange/Brown: 3
(-) Hood Input: Gray: 21
(+) Siren Output: Brown/Red: 11
(-) Parking Lights Output: Lt.Blue/Black: 10
(MUX) Door Lock:
Violet/Red, pin 53
(+) Ignition 1 Input/Ouput: Pink: 10
(+) Fused (30A) Ignition 2/ Flex Relay Input: Red/White: 9
(+) 12 Volt Input: Red: 5
(+) Ignition 2/ Flex Relay Output: Pink/White: 4
(+) Accessory Output: Orange: 8
(+) 12V Input: Red/Black: 2
(+) Starter Output (Car Side): Violet: 7
Starter Input (Key Side): Green: 6
Door Locks Input: Blue/Red: 2
Door Locks Interrupt (vehicle side) : Blue/White: 1
Door Locks Interrupt (conn. side): Blue: 3
Key Release Interrupt (conn.side): Lt. Green: 8
Key Release Interrupt (vehicle side): Lt. Green/White: 9
(-) Ground: Black: 10
(+) 12V Input: Red: 6 &12
White 3-pin conn.
(at ignition switch)
12
(+) Ignition 2 Output:
Orange, pin 1
(+) 12V: Red/Green,pin 2
(+) Starter: Brown, pin 3
3
Resistor 1ΚΩ
CUT
CUT
(+)12V Input: Lt. Green/Red: 7
BCM /Dash Fuse box
(-) Unlock Output: Dk.Blue/Black: 9
22 810 12
4 2442
DS4+
DS4
Slide
to open
Proper Fuse
Positioning
DS4+ DS4
5
15
5
15
MAIN (5A) (+)
(-) RLY3/PK LIGHT(15A) (+)
MAIN (5A) (+)
(-) RLY3/PK LIGHT(15A) (+)
5
15
30
20
20
5
15
30
20
20
5
15
30
20
20
5
15
30
20
20
5
15
30
20
20
5
15
30
20
20
MAIN (5A) (+)
(-) RLY3 PK LIGHT (15A) (+)
(-) ACC & START (30A) (+)
(-) FLEX RLY (20A) (+)
IGN (20A) (+)
MAIN (5A) (+)
(-) RLY3 PK LIGHT (15A) (+)
(-) ACC & START (30A) (+)
(-) FLEX RLY (20A) (+)
IGN (20A) (+)
MAIN (5A) (+)
(-) RLY3 PK LIGHT (15A) (+)
(-) ACC & START (30A) (+)
(-) FLEX RLY (20A) (+)
IGN (20A) (+)
MAIN (5A) (+)
(-) RLY3 PK LIGHT (15A) (+)
(-) ACC & START (30A) (+)
(-) FLEX RLY (20A) (+)
IGN (20A) (+)
MAIN (5A) (+)
(-) RLY3 PK LIGHT (15A) (+)
(-) ACC & START (30A) (+)
(-) FLEX RLY (20A) (+)
IGN (20A) (+)
MAIN (5A) (+)
(-) RLY3 PK LIGHT (15A) (+)
(-) ACC & START (30A) (+)
(-) FLEX RLY (20A) (+)
IGN (20A) (+)
It is important to check that the
fuses are positioned correctly.
5
15
5
15
MAIN (5A) (+)
(-) RLY3/PK LIGHT(15A) (+)
MAIN (5A) (+)
(-) RLY3/PK LIGHT(15A) (+)
5
15
30
20
20
5
15
30
20
20
5
15
30
20
20
5
15
30
20
20
5
15
30
20
20
5
15
30
20
20
MAIN (5A) (+)
(-) RLY3 PK LIGHT (15A) (+)
(-) ACC & START (30A) (+)
(-) FLEX RLY (20A) (+)
IGN (20A) (+)
MAIN (5A) (+)
(-) RLY3 PK LIGHT (15A) (+)
(-) ACC & START (30A) (+)
(-) FLEX RLY (20A) (+)
IGN (20A) (+)
MAIN (5A) (+)
(-) RLY3 PK LIGHT (15A) (+)
(-) ACC & START (30A) (+)
(-) FLEX RLY (20A) (+)
IGN (20A) (+)
MAIN (5A) (+)
(-) RLY3 PK LIGHT (15A) (+)
(-) ACC & START (30A) (+)
(-) FLEX RLY (20A) (+)
IGN (20A) (+)
MAIN (5A) (+)
(-) RLY3 PK LIGHT (15A) (+)
(-) ACC & START (30A) (+)
(-) FLEX RLY (20A) (+)
IGN (20A) (+)
MAIN (5A) (+)
(-) RLY3 PK LIGHT (15A) (+)
(-) ACC & START (30A) (+)
(-) FLEX RLY (20A) (+)
IGN (20A) (+)
Steering Column Harness
(-) Parking Lights:
Lt.Green/Black, pin 42
10 DS4+ CHRYSLER12
© 2017-11-15 Directed. All rights reserved.

Vehicle wiring reference chart
This section provides vehicle wiring information to guide you through the various stages of your installation. Refer to
www.directechs.com for additional information.
Wire Information Connector Information
Function Color Pin Polarity Location Color Pins Ref.
Fiat 500L 2012- 2016
C-CAN High Lt.Green 6 Data OBDII diagnostic connector. Black 16 A
C-CAN Low Brown 14 Data OBDII diagnostic connector. Black 16 A
B-CAN High Dark Blue 1 Data OBDII diagnostic connector. Black 16 A
B-CAN Low White 9 Data OBDII diagnostic connector. Black 16 A
12V Red/Lt.Green 2 (+) Ignition switch. Black 3 B
Starter Brown 3 (+) Ignition switch. Black 3 B
Ignition 2 Orange 1 (+) Ignition switch. Black 3 B
Ignition 1 Dk.Blue 2 (+) Ignition switch. Black 2 C
Accessory Dark Blue/Lt.Green or
Gray 1 (+) Ignition switch. Black 2 C
Key Release Brown/Orange 2 (+) At key cylinder. White 2 D
Parking Lights Lt.Green/Black 42 (-) Steering column harness. Brown 60 E
Door Locks Violet/Red 53 MUX BCM/dash fusebox. Green 60 F
Rear Door/Trunk Unlock Gray/White 27 (-) BCM/dash fusebox. Green 60 F
11 DS4+ CHRYSLER12
© 2017-11-15 Directed. All rights reserved.

Type 3
Refer to "Pre-installation and application warnings" on page 4 for important information, such as the description of special notes referenced in the diagram ( ).
BCM /Dash Fuse box
16
8
9
1
(-) Ground: Black: 10
HS CAN Low: Tan: 1
(-) Rear Door/ Trunk Unlock Output: Red/White: 4
(-) RAP Off Output: Brown/White: 6
HS CAN High: Tan/Black: 2
MS CAN High: Orange/Green: 4
MS CAN Low: Orange/Brown: 3
(-) Parking Light Output: Lt.Blue/Black: 10
(-) Door Unlock Output: Dk.Blue/Black: 9
Hood Pin
(-) Hood Input: Gray: 21
OBDII Plug
Black Connector
C-CAN Low:
Brown, pin 14
C-CAN High:
Green, pin 6
B-CAN Low:
White, pin 9
B-CAN High:
Blue, pin 1
White 3-pin conn.
(at ignition switch)
(+) Accessory: Blue, pin 1
(+) Ignition 1:
Blue/Red, pin 2
Green 60-pin conn.
(BCM/Dash fuse box)
(MUX) Door Lock: Blue/Yellow, pin 53
46
1
15
60
4
3
2
1
White 3-pin conn.
(at ignition switch)
(+) Ignition 2 Output:
White/Black, pin 1
(+) 12V: Red/Dk.Green,pin 2
(+) Starter:
Brown/White or
Brown Gray, pin 3
31
(-) Parking Lights:
Yellow/Black, pin 7
Black 12-pin conn.
(at headlight switch)
12 14 36 5
7 8 109 1211
CUT
(+) Key Release
Brown/Orange,pin 2
CUT
1
2
Key Release Switch
(white conn. at key cylinder)
(MUX) Rear Door / Trunk Unlock:
Gray/White, pin 27
(+) Ignition 1 Input/Ouput: Pink: 10
(+) Fused (30A) Ignition 2/ Flex Relay Input: Red/White: 9
(+) 12V Input: Red: 5
(+) Ignition 2/Flex Relay Output: Pink/White: 4
(+) Accessory Output: Orange: 8
(+) 12V Input: Red/Black: 2
(+) Starter Output (Car Side): Violet: 7
Starter Input (Key Side): Green: 6
Key Release Interrupt (conn.side): Lt. Green: 8
Key Release Interrupt (vehicle side): Lt. Green/White: 9
(-) Door Lock Interrupt (conn. side): Blue: 3
(+) 12V Input: Red: 6 &12
(-) Ground Input: Blue/Red: 2
(-) Door Lock Interrupt (veh. side): Blue/White: 1
(+) Siren Output: Brown/Red: 11
Siren
Resistor 1ΚΩ
Resistor 1ΚΩ
(+)12V Input: Lt. Green/Red: 7
22 810 12
4 2442
DS4+
DS4
Slide
to open
Proper Fuse
Positioning
DS4+ DS4
It is important to check that the
fuses are positioned correctly.
MAIN (5A) (+)
(-) RLY3 PK LIGHT (15A) (+)
(-) ACC & START (30A) (+)
(-) FLEX RLY (20A) (+)
IGN (20A) (+)
MAIN (5A) (+)
(-) RLY3/PK LIGHT(15A) (+)
5
30
20
20
5
Drivers Door Trigger: White/Violet, pin 50
12 DS4+ CHRYSLER12
© 2017-11-15 Directed. All rights reserved.

Vehicle wiring reference chart
This section provides vehicle wiring information to guide you through the various stages of your installation. Refer to
www.directechs.com for additional information.
Wire Information Connector Information
Function Color Pin Polarity Location Color Pins Ref.
Dodge/RAM ProMaster (Gas) 2014-2017
C-CAN High Green 6 Data OBDII diagnostic connector. Black 16 A
C-CAN Low Brown 14 Data OBDII diagnostic connector. Black 16 A
B-CAN High Blue 1 Data OBDII diagnostic connector. Black 16 A
B-CAN Low White 9 Data OBDII diagnostic connector. Black 16 A
12V Red/Black 2 (+) Ignition switch. White 3 B
Starter Brown/White or Brown/
Gray 3 (+) Ignition switch. White 3 B
Ignition 2 White/Black 1 (+) Ignition switch. White 3 B
Ignition 1 Blue/Red 2 (+) Ignition switch. White 4 C
Accessory Blue 1 (+) Ignition switch. White 4 C
Key Release Brown/Orange 2 (+) At key cylinder White 2 D
Parking Lights Yellow/Black 7 (-) Headlight switch. Black 12 E
Door Locks Blue/Yellow 53 MUX BCM/Dash fuse box. Green 60 F
Rear Door/Trunk Unlock Gray/White 27 MUX BCM/Dash fuse box. Green 60 F
Drivers Door Trigger White/Violet 50 (-) BCM/Dash fuse box. Green 60 F
13 DS4+ CHRYSLER12
© 2017-11-15 Directed. All rights reserved.

Type 4
Refer to "Pre-installation and application warnings" on page 4 for important information, such as the description of special notes referenced in the diagram ( ).
16
8
9
1
(-) Ground: Black: 10
HS CAN Low: Tan: 1
HS CAN High: Tan/Black: 2
MS CAN High: Orange/Green: 4
MS CAN Low: Orange/Brown: 3
(+) Brake Output: Violet/Black: 8
(-) Parking Light Output: Lt.Blue/Black: 10
Hood Pin
(-) Hood Input: Gray: 21
(+) Siren Output: Brown/Red: 11
OBDII Plug
Black Connector
C-CAN Low:
Brown, pin 14
C-CAN High:
Green, pin 6
B-CAN Low:
White, pin 9
B-CAN High:
Blue, pin 1
White 3-pin conn.
(at ignition switch)
(+) Accessory: Blue, pin 1
(+) Ignition 1:
Blue/Red, pin 2
Green 60-pin conn.
(BCM/Dash fuse box)
(MUX) Door Lock: Blue/Yellow, pin 53
46
1
15
60
4
3
2
1
White 3-pin conn.
(at ignition switch)
(+) Ignition 2 Output:
White/Black, pin 1
(+) 12V: Red/Dk.Green,pin 2
(+) Starter: Brown/White or
Brown/Gray, pin 3
31
(-) Parking Lights:
Yellow/Black, pin 7
Black 12-pin conn.
(at headlight switch)
12 14 36 5
7 8 109 1211
12 34
(+) Brake: Green/White, pin 4
White 4-pin conn.
(at brake pedal switch)
(MUX) Rear Door / Trunk Unlock:
Gray/White, pin 27
(+) Ignition 1 Input/Ouput: Pink: 10
(+) Fused (30A) Ignition 2/ Flex Relay Input: Red/White: 9
(+) 12V Input: Red: 5
(+) Ignition 2/Flex Relay Output: Pink/White: 4
(+) Accessory Output: Orange: 8
(+) 12V Input: Red/Black: 2
(+) Starter Output (Car Side): Violet: 7
Starter Input (Key Side): Green: 6
(+) 12V Input: Red: 6 &12
Siren
Resistor 1ΚΩ
BCM /Dash Fuse box
22 810 12
4 2442
DS4+
DS4
Slide
to open
Proper Fuse
Positioning
DS4+ DS4
It is important to check that the
fuses are positioned correctly.
MAIN (5A) (+)
(-) RLY3 PK LIGHT (15A) (+)
(-) ACC & START (30A) (+)
(-) FLEX RLY (20A) (+)
IGN (20A) (+)
MAIN (5A) (+)
(-) RLY3/PK LIGHT(15A) (+)
5
30
20
20
5
(-) Rear Door/ Trunk Unlock Output: Red/White: 4
(-) Door Unlock Output: Dk.Blue/Black: 9
(-) Door Lock Interrupt (conn. side): Blue: 3
(-) Ground Input: Blue/Red: 2
(-) Door Lock Interrupt (veh. side): Blue/White: 1
Resistor 1ΚΩ
CUT
(-) RAP Off Output: Brown/White: 6
Drivers Door Trigger: White/Violet, pin 50
Resistor 1ΚΩ
14 DS4+ CHRYSLER12
© 2017-11-15 Directed. All rights reserved.

Vehicle wiring reference chart
This section provides vehicle wiring information to guide you through the various stages of your installation. Refer to
www.directechs.com for additional information.
Wire Information Connector Information
Function Color Pin Polarity Location Color Pins Ref.
Dodge/RAM ProMaster (Diesel) 2014-2016
C-CAN High Green 6 Data OBDII diagnostic connector. Black 16 A
C-CAN Low Brown 14 Data OBDII diagnostic connector. Black 16 A
B-CAN High Blue 1 Data OBDII diagnostic connector. Black 16 A
B-CAN Low White 9 Data OBDII diagnostic connector. Black 16 A
12V Red/Black 2 (+) Ignition switch. White 3 B
Starter Brown/White or Brown/
Gray 3 (+) Ignition switch. White 3 B
Ignition 2 White/Black 1 (+) Ignition switch. White 3 B
Ignition 1 Blue/Red 2 (+) Ignition switch. White 4 C
Accessory Blue 1 (+) Ignition switch. White 4 C
Parking Lights Yellow/Black 7 (-) Headlight switch. Black 12 D
Door Locks Blue/Yellow 53 MUX BCM/Dash fusebox. Green 60 E
Rear Door/Trunk Unlock Gray/White 27 MUX BCM/Dash fusebox. Green 60 E
Drivers Door Trigger White/Violet 50 (-) BCM/Dash fusebox. Green 60 E
Brake Green/White 4 (+) Brake pedal switch. White 4 F
15 DS4+ CHRYSLER12
© 2017-11-15 Directed. All rights reserved.

Type 5
Refer to "Pre-installation and application warnings" on page 4 for important information, such as the description of special notes referenced in the diagram ( ).
16
8
9
1
OBDII Plug Black Connector
C-CAN Low:
Brown, pin 14
C-CAN High:
Lt.Green, pin 6
B-CAN Low:
White, pin 9
B-CAN High:
Lt.Blue, pin 1
(+) Accessory:
Gray, pin 1 (+) Ignition 1:
Dk.Blue, pin 2
1
(+) Ignition 2:
Orange, pin 1
(+) 12V:
Red/Dk.Green,
pin 2
(+) Starter:
White/Red, pin 3
Black 60-pin conn.
(at BCM/ Dash Fuse box)
(MUX) Door Lock: Violet/Red, pin 51
(-) Rear Door/ Trunk Unlock:
Violet/Blue, pin 24
46
1
15
60
(+) Key Release
Brown/Yellow,pin 2
(-) Parking Lights
Green/Black, pin 3
Parking Lights
(black conn. at headlight switch)
HS CAN Low: Tan: 1
(-) Rear Door/ Trunk Unlock Output: Red/White: 4
HS CAN High: Tan/Black: 2
MS CAN High: Orange/Green: 4
MS CAN Low: Orange/Brown: 3
Hood Pin
(-) Hood Input: Gray: 21
Siren
(+) Siren Output: Brown/Red: 11
Black 2-pin conn.
(at ignition switch)
12
Black 3-pin conn.
(at ignition switch)
123
(-) Parking Light Output: Lt.Blue/Black: 10
Key Release Switch
(white conn. at key cylinder)
1
2
(+) Ignition 1 Input/Ouput: Pink: 10
(+) Fused (30A) Ignition 2/ Flex Relay Input: Red/White: 9
(+) 12V Input: Red: 5
(+) Ignition 2/ Flex Relay Output: Pink/White: 4
(+) Accessory Output: Orange: 8
(+) 12V Input: Red/Black: 2
(+) Starter Output (Car Side): Violet: 7
Starter Input (Key Side): Green: 6
(-) Ground Input: Blue/Red: 2
Door Lock Interrupt (vehicle side) : Blue/White: 1
Door Lock Interrupt (conn. side): Blue: 3
Key Release Interrupt (conn.side): Lt. Green: 8
Key Release Interrupt (vehicle side): Lt. Green/White: 9
(-) Ground: Black: 10
(+) 12V: Red: 6 &12
(+)12V Input: Lt. Green/Red: 7
CUT
BCM /Dash Fuse box
22 810 12
4 2442
DS4+
DS4
Slide
to open
Proper Fuse
Positioning
DS4+ DS4
It is important to check that the
fuses are positioned correctly.
MAIN (5A) (+)
(-) RLY3 PK LIGHT (15A) (+)
(-) ACC & START (30A) (+)
(-) FLEX RLY (20A) (+)
IGN (20A) (+)
MAIN (5A) (+)
(-) RLY3/PK LIGHT(15A) (+)
5
30
20
20
5
CUT
(-) Door Unlock Output: Dk.Blue/Black: 9
(-) RAP Off Output: Brown/White: 6
Drivers Door Trigger: White/Violet, pin 54
Resistor 1ΚΩ
16 DS4+ CHRYSLER12
© 2017-11-15 Directed. All rights reserved.

Vehicle wiring reference chart
This section provides vehicle wiring information to guide you through the various stages of your installation. Refer to
www.directechs.com for additional information.
Wire Information Connector Information
Function Color Pin Polarity Location Color Pins Ref.
Dodge/RAM ProMaster City 2015-2016
C-CAN High Lt.Green 6 Data OBDII diagnostic connector. Black 16 A
C-CAN Low Brown 14 Data OBDII diagnostic connector. Black 16 A
B-CAN High Lt.Blue 1 Data OBDII diagnostic connector. Black 16 A
B-CAN Low White 9 Data OBDII diagnostic connector. Black 16 A
12V Red/Dk.Green 2 (+) Ignition switch. Black 3 B
Starter White/Red 3 (+) Ignition switch. Black 3 B
Ignition 2 Orange 1 (+) Ignition switch. Black 3 B
Ignition 1 Dk.Blue 2 (+) Ignition switch. Black 2 C
Accessory Gray 1 (+) Ignition switch. Black 2 C
Key Release Brown/Yellow 2 (+) At key cylinder. White 2 D
Parking Lights Green/Black 3 (-) Connector at headlight switch. Black 10 E
Door Locks Violet/Red 51 MUX BCM/Dash fusebox. Black 60 F
Rear Door/Trunk Unlock Violet/Blue 24 MUX BCM/Dash fusebox. Black 60 F
Drivers Door Trigger White/Violet 54 (-) BCM/Dash fusebox. Black 60 F
17 DS4+ CHRYSLER12
© 2017-11-15 Directed. All rights reserved.

Key2GO
This feature is mandatory to control the immobilizer override in this firmware.
Key2GO has been designed and developed to bypass the advanced encryption layers found in modern vehicles. It uses an array
of servers to generate a duplicate of the original key, allowing the installation of a remote starter without having to give up a key.
The advantage is that this feature allows you to use one original key and the server to configure the bypass in the vehicle.
All Key2GO-compatible firmware are clearly indicated in the function list of each vehicle search result page and will also appear
on the flash page. Any first-time user must re-register to gain access to Key2GO, and some additional information will be required
to complete the registration process, such as your Directed account number and store name.
Key2GO is compatible with XKLoader2, the online web tool, and the DirectLink Mobile application.
Refer to "Module programming" on page 19 of this guide for instructions on how to program features using Key2GO.
Configuring the system
Important!
Once the DS4+ module is installed in the vehicle following the instructions in "Installation (wiring diagrams, fuse selection & vehicle
wiring reference charts)" on page 8, launch the DirectLink application on your mobile device, and select Configure DS4/
DS4+. Follow the on-screen instructions to configure the system.
Note: Your system can also be configured using XKLoader2 on www.directechs.com.
Vehicles equipped with a manual transmission
Additional connections may be required if these functions are not supported by the firmware.
Connection Description
(-) E-Brake Status Input
(Black/White, pin 17)
Must be connected to a working emergency brake in the vehicle. Although most vehicles have simple
(-) trigger emergency brake circuits note some vehicles do not and may require unique integration
methodologies.
(-) Door Trigger Input
(Green, pin 20) OR
(+) Door Input (Violet, pin
13)
Must be connected to a working door trigger in the vehicle, which monitors all doors. The unit must monitor
the door pins to allow the Ready Mode process to be enabled.
Note: Some vehicles may require unique integration methodologies for this circuit. For more information, refer
to www.directechs.com.
(AC) Tachometer Input
(Violet/White, pin 22)
Must be connected to a working tachometer signal in the vehicle (fuel injector, ignition coil, true tach, etc.)
and learned successfully to the DS4+.
RF Systems
An RF System consists of one or multiple remotes, a Control Center (antenna), and an antenna cable – various combinations exist.
An RF System allows the vehicle owner to control the system with enhanced range. Two-way models are available. Please follow
the instructions included with the kit for appropriate installation and programming information.
8504D Combo Sensor
The 8504D Combo Sensor must be paired to the device before it can be used. To enter pairing, turn the vehicle ignition to the
ON position, then press and hold the programming button on the Control Center (antenna) until the LED starts flashing. Once
pairing mode has been entered, your Combo Sensor is ready to use.
Your Combo Sensor is preset for the majority of applications, however it can be adjusted using the DirectLink application, as well
as a compatible LED or LCD remote. Please refer to the instructions included with your sensor for more information on how to make
adjustments.
18 DS4+ CHRYSLER12
© 2017-11-15 Directed. All rights reserved.

When used in conjunction with SmartStart
To enable D2D communication between the DS4+ and the SmartStart one of the following actions must be executed:
• SmartStart with Loops – The brown loop must be cut.
• SmartStart with Pigtails – The gray wire must be connected to a ground source.
Loops Pigtails
DO NOT connect the SmartStart 2-pin power harness when using the DS4+. Power and ground will be provided by the D2D
connector on main module. Refer to the SmartStart documentation for further details.
D2D port configuration
The system will automatically configure the D2D ports based on your selections in the module programming. The white D2D port is
reserved for SmartStart. To ensure proper functionality with SmartStart, it is important that it is selected in the system programming
of the DirectLink application or via the online web tool.
Note: Both black D2D ports are reserved for the Control Center (antenna) and 8504D Combo Sensor.
Module programming
Refer to "LED diagnostics and troubleshooting" on page 21 for more information and for troubleshooting purposes.
To connect the module:
1
Please ensure that the vehicle is in a safe location and cannot move forward during
programming. For vehicles equipped with a manual transmission, make sure the gearshift
lever is in the neutral position.
2Connect all the harnesses to the DS4+, EXCEPT the 12-pin main power harness.
Connect all but the
12-pin harness
Note: The firmware does not control the OEM alarm. Remove the battery in the OEM
remote to prevent the vehicle from arming. To skip the transponder programming and use
convenience features only, press the programming button five (5) times.
REMOVE
BATTERY
CR 2032
3V
3Connect the 12-pin main power harness, and wait until the LED turns ON solid red.
Must be
connected LAST &Solid
4
Turn the key to turn ignition ON then back OFF up to10 times. The LED
starts to flash orange slowly.
Note: If transponder programming was skipped, the LED turns ON solid
orange for 3 seconds then shuts OFF.
START
Key OUT
ON
OFF
START
Key IN
ON
OFF
START
Key IN
ON
OFF
START
Key IN
ON
OFF
START
Key OUT
ON
OFF
START
Key IN
ON
OFF
START
Key IN
ON
OFF
START
Key IN
ON
OFF
&Flashes
orange
slowly
&
(
)
up to x 10
(
) up to x 10
19 DS4+ CHRYSLER12
© 2017-11-15 Directed. All rights reserved.

5Turn vehicle ignition OFF and proceed to the next step.
START
Key OUT
ON
OFF
START
Key IN
ON
OFF
START
Key IN
ON
OFF
START
Key IN
ON
OFF
6
Remove the module from the vehicle and reconnect it to your computer. The Directechs
web site will automatically recognize that you are moving onto the second phase of the
programming sequence.
7Select the method and click on Submit Key2Go Request.
8Once the configuration is completed, reconnect the module. The LED turns solid green for 3
sec. then OFF. Solid x 3 secs Off
&
9
Pair remotes (if applicable). For information on how to pair a specific remote, please
refer to its corresponding owner documentation, which can be found inside the product
packaging of the complete system or on www.directechs.com.*
Pair
remotes*
10 By default, the tachometer is preprogrammed for the vehicle. For instructions on how to
program tach, see page 24. Initialize
tachometer
* Your aftermarket remote may differ from the model shown in the illustrations.
You have successfully completed the module programming sequence.
20 DS4+ CHRYSLER12
© 2017-11-15 Directed. All rights reserved.