Eizo FlexScan MX300W User manual

EIZO MX300W
30“ DICOM-preset monitor
This widescreen monitor with DICOM presettings will win you over with its 30" panel size.
The 2560 x 1600 pixel resolution produces a quality picture containing each detail. The MX300W also
achieves high quality in terms of colour presentation and backlight evenness. The Digital Uniformity
Equalizer is responsible for this. Thanks to this function, the MX300W displays black and white and colour
radiological images properly throughout the entire display. The MX300W is capable of replacing common
two monitor solutions with its Picture-by-picture function. Images, which would otherwise be displayed on
two monitors, can be displayed in portrait mode side by side – 2 megapixel two monitor solutions using
only one device.
♦ Displaying the gray scale using DICOM tone curves
♦ 320 cd/m² brightness, 1000:1 contrast ratio
♦ Automatic brightness regulation
♦ Automatic brightness distribution regulation DUE
♦ Prepared for calibration, drop and brightness constancy control in compliance with DIN V 6868-57 and
QS-RL, class B
♦ Picture-by-Picture for the simultaneous display of two signal sources

Avnet Technology Solutions:
Belgium - Luxemburg Telephone: [phone] www.radiforce.be
EIZO MX300W
Exceptional picture quality First class picture quality and
sharp text contours is achieved thanks to its high resolution of
2560 x 1600 pixels, 1000:1 contrast ratio and maximum
brightness of 300 cd/m². It doesn’t matter whether you are
sitting directly in front of the monitor or look at it from an
angle, or which part of the screen you are looking at - the
evenness of colours and colour transitions at high contrasts
remain at the same high level up to the corners.
Automatic brightness distribution regulation It is
necessary to maintain a homogeneous distribution of brightness
throughout the entire display area in order to achieve precise
picture reproduction. The Digital Uniformity Equalizer, a special
circuit, automatically corrects brightness non-uniformity for
each pixel via the 12bit LUT.
Precise colour control Colour reproduction is controlled by
the internal 12 bit LUT (Look-Up-Table). This helps achieving a
much more accurate grading of colour information than with an
8bit LUT. The RadiCS LE software is used to perform the
individual calibration of the white pixel and tone curve.
DIN V 6868-57 Display features, particularly brightness and
contrast, enable the classification of picture observation into
category B in compliance with DIN V 6868-57.
CalSwitch This function offers a total of four picture modes
with various preset values of brightness, colour temperature
and tone curve. With a push of a single button or by changing
Windows settings, you can immediately achieve the ideal setup
for the given purpose of use (DICOM, Custom, CAL and Text
modes). The monitor is then able to automatically switch to the
calibrated mode (CAL). The DICOM tone curve, corresponding
to clean film, is preset.
Brightness stabilization A sensor, invisibly placed behind the
monitor, constantly measures the brightness. The defined or
calibrated values are achieved within seconds of turning on the
monitor and are maintained constant during operation.
Backlight Saver The Backlight Saver function limits the
wearing of the monitor backlight. This function can work
automatically and is part of the ScreenManager Pro Medical
software. Similar to a screen saver, the Backlight Saver
function turns off the backlight lamp, when the monitor is not in
use.
Signal inputs, Picture-by-Picture One of the two DVI-D
inputs are Dual Link, for signals with a resolution of 2560 x
1600 pixels, which are received as a whole. The MX300W can
alternatively process two Single Link signals from two
computers or two graphics cards on both inputs. Both pictures
are then displayed side by side - Picture by Picture. The
MX300W replaces the 2 megapixel two monitor solution in this
manner.
RadiCS LE Using the RADICS LE software enables testing the
brightness and DICOM tone curve and automatically perform
the calibration process based on factory settings. A brightness
sensor integrated within the device is used for this purpose.
Additional tone curves, e.g. CIE, can be calibrated using RadiCS
LE. An optional sensor must be used for the realization
described.
Standards
Under reserve of updates 08/08
Main features Panel size 75.6 cm (30 inches), 16:10 format
Display quality Recommended for displaying situations in
compliance with DIN V 6868-57 category B
Device colour Black
Viewable image size 641 mm (width) x 401 mm (height)
Viewable image size - diagonal 756 mm
Ideal/Recommended resolution 2560 x 1600 pixels
Pixel pitch 0.25 mm x 0.25 mm
Display colours 16.7 million
Max. brightness 300 cd/m²
Max. contrast 1000:1
Max. Viewing angle Horizontal: 178°; Vertical: 178°
LCD technology S-PVA
Typical response time, medium
tone 6 ms
Typical response time, medium
tone 6/6 ms, black-white transition
Main features display via DICOM tone curves, calibration,
12bit Look-Up-Table for precise colour
control, Picture-by-Picture, CAL-Switch,
Dynamic Motion Picture Overdrive, automatic
picture size and position, On- Screen
Display, PowerManager thanks to VESA
DPMS, Plug & Play in compliance with VESA
DDC2B
Adjustment functions brightness, Gamma, RGB colour saturation,
clock, phase, picture position,
resolution, Off Timer, interpolation, OSD
language (German, English, French,
Swedish, Spanish, Italian)
Resolution 2560 x 1600 full screen 2048 x 1536, 1920 x
1200, 1600 x 1200, 1680 x 1050, 1280 x
1024, 1024 x 768,
800 x 600, 720 x 400, 640 x 480, enlarged
to full screen or 1:1
Horizontal frequency 31 – 100 kHz (digital)
Vertical frequency 59 – 61 kHz (digital)
Pixel frequency 269 MHz (digital), dual link required for
frequencies above 165 MHz
Picture signals TMDS (dual link / single link)
Input connectors 2x DVI-D, for one Dual Link or two Single
Link signals
Plug & Play VESA DDC CI
Power Management DVI-DMPM
Power consumption max. 170 W,
Power save mode: less than 1 Watt
Dimensions (WxHxD) 689 mm x (512 mm to 630 mm) x 255 mm,
689 mm x 450 x 90 mm (without stand)
Net weight 15.7 kg,
11.2 kg (without stand)
Rotation / Tilt 35° right/left, 40° back/front
Height adjustability 90 mm
Standards TÜV GM, CE (EN 60601-1, EN 60601-1-2)
USB-Hub 1 Up-, 2 Down-Stream, Rev. 2.0
Accessories included RadiCS LE, Manual (German, English and
French), ScreenManager Pro for Medical
Software on CDROM, power cable, USB
cable, signal cable (DVI-D-DVI-D Dual-Link,
DVI-D-DVI-D Single-Link), ICC colour profile
Service 5 years warranty
Technical specifications