Eizo FlexScan SX2462W User manual

Important
Please read PRECAUTIONS, this User’s Manual and Setup Guide
(separate volume) carefully to familiarize yourself with safe and effective usage.
• Please read the Setup Guide (separate volume)
• The latest User’s Manual is available for download from our site:
http://www.eizo.com
Cover

2
[Location of the Caution Statements]
Ex. SX2462W
This product has acquired TCO standard that relates to safety, ergonomics, environment and so forth of
ofce equipment. For overview of the TCO, refer to our website.
http://www.eizo.com
Product specication may vary with sales areas.
Conrm the specication in the manual written in language of the region of purchase.
Copyright© 2009-2011 EIZO NANAO CORPORATION All rights reserved.
No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by
any means, electronic, mechanical, or otherwise, without the prior written permission of EIZO NANAO
CORPORATION.
EIZO NANAO CORPORATION is under no obligation to hold any submitted material or information
condential unless prior arrangements are made pursuant to EIZO NANAO CORPORATION’s receipt of
said information.
Although every effort has been made to ensure that this manual provides up-to-date information, please
note that EIZO monitor specications are subject to change without notice.
Apple and Macintosh are registered trademarks of Apple Inc.
VGA is a registered trademark of International Business Machines Corporation.
Windows and Windows Vista are registered trademarks of Microsoft Corporation.
The round gothic bold bit map font used for this product is designed by Ricoh.
VESA is a registered trademark or a trademark of the Video Electronics Standards Association in the United States and other
countries.
PowerManager and UniColor Pro are trademarks of EIZO NANAO CORPORATION.
EIZO, EIZO Logo, FlexScan, i•Sound and ScreenManager are registered trademarks of EIZO NANAO CORPORATION in Japan and
other countries.

3
Notice for this monitor
Aside from creating documents, viewing multimedia content, and other general purposes, this product is also suited to
applications such as graphics creation and digital photo processing, where accurate color reproduction is a priority.
This product has been adjusted specically for use in the region to which it was originally shipped. If the product is
used outside the region, it may not operate as specied in the specications.
This product may not be covered by warranty for uses other than those described in this manual.
The specications noted in this manual are only applicable for power cords and signal cables specied by us.
Use optional products manufactured or specied by us with this product.
As it takes about 30 minutes for the performance of electrical parts to stabilize, adjust the monitor 30 minutes or more
after the monitor power has been turned on.
In order to suppress the luminosity change by long-term use and to maintain the stable luminosity, use of a monitor in
lower brightness is recommended.
When the screen image is changed after displaying the same image for extended periods of time, an afterimage may
appear. Use the screen saver or power save function to avoid displaying the same image for extended periods of time.
Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime. (Refer to
“Cleaning” on the next page.)
The LCD panel is manufactured using high-precision technology. However, missing pixels or lit pixels may appear on
the LCD panel, this is not malfunction.Percentage of effective pixels : 99.9994% or higher.
The backlight of the LCD panel has a xed life span. When the screen becomes dark or begins to icker, please
contact your dealer.
Do not press on the panel or edge of the frame strongly, as this may result in the display malfunction, such as the
interference patterns, etc. If pressure is continually applied to the LCD panel, it may deteriorate or damage your LCD
panel. (If the pressure marks remain on the LCD panel, leave the monitor with a white or black screen. The symptom
may disappear.)
Do not scratch or press on the panel with any sharp objects, such as a pencil or pen as this may result in damage to the
panel. Do not attempt to brush with tissues as this may scratch the LCD panel.
When the monitor is cold and brought into a room or the room temperature goes up quickly, dew condensation
may occur inside and outside the monitor. In that case, do not turn the monitor on and wait until dew condensation
disappears, otherwise it may cause some damages to the monitor.

4
Cleaning
Attention
• Never use any solvents or chemicals, such as thinner, benzene, wax, alcohol, and abrasive cleaner, which may
damage the cabinet or LCD panel.
NOTE
• Optional ScreenCleaner is recommended for cleaning the panel surface.
● LCD Panel
• Clean the LCD panel with a soft cloth such as cotton cloth or lens cleaning paper.
• Remove persistent stains gently with a cloth dampened with a little water, and then clean the LCD
panel again with a dry cloth for better nishing.
● Cabinet
• Clean the cabinet with a soft cloth dampened with a little mild detergent.
To use the monitor comfortably
• An excessively dark or bright screen may affect your eyes. Adjust the brightness of the monitor
according to the environmental conditions.
• Staring at the monitor for a long time tires your eyes. Take a 10-minute rest every hour.

5
CONTENTS
CONTENTS
Cover ............................................................. 1
Notice for this monitor ............................................. 3
CONTENTS ............................................................. 5
Chapter 1 Introduction ....................................... 6
1-1. Features ............................................................ 6
1-2. Controls and Functions .................................. 7
1-3. Utility Disk ........................................................ 8
● Disk contents and software overview ................ 8
● To use ScreenManager Pro for LCD/
EIZO ScreenSlicer ............................................. 8
1-4. Basic Operation and Functions ..................... 9
Basic operation of Adjustment menu................. 9
Showing Button Guide ........................................10
Functions ..............................................................11
Chapter 2 Adjusting Screen ............................. 12
2-1. Setting Screen Resolution ...............................12
Compatible Resolutions/Frequencies ...............12
Setting Resolution ...............................................13
● Windows 7 .........................................................13
● Windows Vista ..................................................13
● Windows XP ......................................................13
● Mac OS X ..........................................................13
2-2. Displaying Screen Correctly .........................14
Digital Input ..........................................................14
Analog Input .........................................................14
2-3. Color Adjustment ...........................................18
● To select the display mode (FineContrast) .......18
● To perform advanced adjustments ...................18
● Adjustment items in each mode ........................19
● To adjust the brightness [Brightness] .............. 20
● To adjust the contrast [Contrast] ...................... 20
● To adjust the color temperature [Temperature] ..20
● To adjust the gamma value [Gamma] ...............21
● To adjust the hue [Hue] .....................................21
● To adjust the color saturation [Saturation] ........21
● Enable/Disable Contrast Enhancer
[Contrast Enhancer] ......................................... 22
● To enhance the outline of the image
[Outline Enhancer] ........................................... 22
● To adjust the gain value [Gain] ......................... 22
● To adjust six colors [6 Colors] .......................... 23
2-4. Displaying Lower Resolutions..................... 24
● To change screen size [Screen Size]................24
Chapter 3 Setting Monitor ................................ 25
3-1. Enabling/Disabling Mode Selection
[Mode Preset] ................................................. 25
3-2. Locking Buttons [Key Lock] ........................ 25
3-3. Setting the EIZO Logo Display [Logo] ........ 26
3-4. Setting Orientation [Orientation] ................ 26
● To set the orientation of the Adjustment menu . 26
3-5. Setting Language [Language] ..................... 27
3-6. Setting the Display Position of the
Adjustment Menu [Menu Position] .............. 27
3-7. Enable/Disable DDC/CI communication ..... 27
3-8. Enable/Disable Auto Sharpness
[Auto Sharpness] .......................................... 28
3-9. Restoring the Default Setting ...................... 28
● To reset color adjustment values [Color Reset] . 28
● To reset all adjustments to the factory default
settings [All Reset] ........................................... 28
Chapter 4 Power Saving Function ................... 29
4-1. Setting the Power Saving [Power Save] ..... 29
4-2. Setting Power Indicator [Power Indicator] ... 29
4-3. Setting Monitor’s Automatic Brightness
Adjustment [Auto EcoView] ......................... 30
4-4. Setting the automatic power off function
[Eco Timer] ..................................................... 30
Chapter 5 Troubleshooting .............................. 31
Chapter 6 Reference ......................................... 34
6-1. Attaching an Arm .......................................... 34
6-2. Connecting More than Two PCs to the
Monitor ........................................................... 35
● To switch the input signal ................................. 35
● To set input signal selection [Input Selection] .. 36
6-3. Making Use of USB (Universal Serial Bus) ..37
● Required System Environment .........................37
●
Connection Procedure (Setup of USB Function) .. 37
6-4. Displaying Monitor Information .................. 38
● Displaying monitor information by pressing .. 38
● Displaying signal information [Signal Info] ....... 38
●
Displaying monitor information [Monitor Info] .... 38
6-5. Specications ................................................ 39
6-6. Glossary ......................................................... 45
6-7. Preset Timing ..................................................47
TCO’03 ........................................................... 48
FCC Declaration of Conformity ......................... 49
Hinweise zur Auswahl des richtigen Schwenkarms für
Ihren Monitor ............................................................... 50
Hinweis zur Ergonomie ............................................... 50

6Chapter 1 Introduction
Chapter 1 Introduction
Thank you very much for choosing an EIZO Color Monitor.
1-1. Features
• 22” wide format LCD (SX2262W) / 24” wide format LCD (SX2462W)
• Resolution 1920 dots x 1200 lines
• Applicable to DisplayPort (applicable to 8 bit or 10 bit, not applicable to audio signals)
• 3 signal input terminals (DVI-I x 2, DisplayPort x 1)
• FineContrast function for selecting an optimal display mode
“2-3. To select the display mode (FineContrast)” (page 18)
• The software “ScreenManager Pro for LCD” to adjust the screen using the mouse and keyboard is
included
“1-3. Utility Disk” (page 8)
• Color Vision Deciency Simulation Software “UniColor Pro” supported
(This software can be downloaded from http://www.eizo.com)
• Power saving function
Suppressing the power consumption* reduces the carbon dioxide emissions. This product is equipped with power
saving function.
-Power Consumption when main power switch is Off: 0W
Equipped with main power switch.
Turning off the main power switch completely shuts off power supply to the monitor while the monitor is not
used.
-Auto EcoView function
The sensor on the front side of the monitor detects the environmental brightness to adjust the screen brightness
automatically and comfortably.
Excessively high brightness may lead a damage to the natural environment as well as to your eyes. Suppressing
the excessively high brightness will be helpful to reduce the power consumption and the damage to your eyes.
“4-3. Setting Monitor’s Automatic Brightness Adjustment [Auto EcoView]” (page 30)
-EcoView Index function
This indicator shows the power saving ratio, power reduction and CO2 reduction as a result of the brightness
of the monitor. You can realize the power consumption reduction by taking consideration in the ratio of power
saving.
“6-4. Displaying Monitor Information” (page 38)
• HDCP (High-bandwidth Digital Content Interface)
• Portrait/Landscape display available (rotate 90 degrees clockwise)
* Reference values:
-SX2262W
Maximum power consumption: 80W (Luminance Max., at default settings)
Standard power consumption: 45W (100VAC, Luminance 120cd/m2, at default settings)
Standard power consumption: 45W (200VAC, Luminance 120cd/m2, at default settings)
-SX2462W
Maximum power consumption: 85W (Luminance Max., at default settings)
Standard power consumption: 48W (100VAC, Luminance 120cd/m2, at default settings)
Standard power consumption: 47W (200VAC, Luminance 120cd/m2, at default settings)
NOTE
• This monitor supports the Portrait/Landscape display. This function allows you to change the orientation of the
Adjustment menu when using the monitor screen in vertical display position. (Refer to “To set the orientation of
the Adjustment menu [Orientation]” on page 26.)
• For using the monitor with “Portrait” position, the graphics board supporting portrait display is required. When
placing the monitor in a "Portrait" position, settings of your graphics board need to be changed. Refer to the
manual of the graphics board for details.

7
Chapter 1 Introduction
1-2. Controls and Functions
Ex. SX2462W
16
19
18
17
1211 13 15
14
1 2 3 4 5 6 7 8 9 10
20
Adjustment menu
1 Sensor Detects ambient brightness. Auto EcoView function. (page 30)
2 button Switches input signals for display when more than two PCs are connected to the
monitor. (page 35)
3 button Allows you to switch the FineContrast mode. (page 18)
4 button Information regarding monitor power saving (page 38)
5 button Adjusts the brightness.(page 20)
6 button Cancels the adjustment/setting or exit the adjustment menu.(page 9)
7 button Chooses an adjustment item or increases/decreases adjusted values for advanced
adjustments using the Adjustment menu.
8 button Displays the Adjustment menu, determines an item on the menu screen, and saves
values adjusted.(page 9)
9 button Turns the power on or off.
10 Power indicator Indicates monitor’s operation status.
Blue: Operating Orange: Power saving Off: Power off
11 Main Power switch Turns the main power on or off.
12 Power connector Connects the power cord.
13 Input signal connectors DisplayPort Connector x 1
14 Input signal connectors DVI-I Connector x 2 (Left : SIGNAL1 / Right : SIGNAL2)
15 USB port (Up) Connects the USB cable to use the software that needs USB connection, or to use
USB Hub function.(page 37)
16 USB port (Down) Connects a peripheral USB device.
17 Stand Used to adjust the height and angle of the monitor screen.
18 Security lock slot Complies with Kensington’s MicroSaver security system.
19 Cable holder Covers the monitor cables.
20 Option speaker
(i·Sound L3) mounting
holes
Used to attach the option speaker (i·Sound L3).

8Chapter 1 Introduction
1-3. Utility Disk
An “EIZO LCD Utility Disk” (CD-ROM) is supplied with the monitor. The following table shows the
disk contents and the overview of the software programs.
● Disk contents and software overview
The disk includes application software programs for adjustment, and User’s Manual. Refer to “Readme.
txt” le on the disk for software startup procedures or le access procedures.
Item Overview OS
A “Readme.txt” le
Screen adjustment pattern
les
Used when adjusting the image of the analog
signal input manually.
ScreenManager Pro for LCD A software for adjusting the screen using the
mouse and keyboard.Connect the monitor to
the PC with the supplied USB cable before
installation.
Windows XP/Vista
* WindowMovie Checker
Software
WindowMovie is a function of ScreenManager
Pro for LCD. For more information, refer to the
User’s Manual of ScreenManager Pro for LCD
on the disk.
EIZO ScreenSlicer A software that divides a screen and lays out
multiple windows efciently.
Windows XP/Vista/7
User’s Manual of this monitor (PDF le)
● To use ScreenManager Pro for LCD/EIZO ScreenSlicer
For the installation and use of ScreenManager Pro for LCD/EIZO SceenSlicer, refer to the respective
User's Manual on the disc.
To adjust the monitor using ScreenManager Pro for LCD, connect a PC to the monitor with the supplied
USB cable. For more information, refer to the “Chapter 6 6-3. Making Use of USB (Universal Serial
Bus)” (page 37).

9
Chapter 1 Introduction
1-4. Basic Operation and Functions
Basic operation of Adjustment menu
1 Displaying Adjustment Menu
Press .
The adjustment menu appears.
Current mode
Menu title
Settings
Menu
Item
2 Adjusting/Setting
1. Choose a menu to adjust/set with , and press .
2. Choose an item to adjust/set with , and press .
3. Adjust/set the selected item with , and press .
3 Exiting
Press a few times.
The adjustment menu nishes.

10 Chapter 1 Introduction
Showing Button Guide
Press the front buttons (except button), the button guide appears above the button. (When using the
monitor with "Portrait" position, the button guide appears next to the button.)
NOTE
• The button guide will continue to appear while the Adjustment menu or Mode menu is showing.
• The button guide is displayed differently depending on the selected menu or status.

11
Chapter 1 Introduction
Functions
The following table shows all the Adjustment menu’s adjustment and setting menus.
Main Menu Item Adjusting/Setting
Color Brightness “2-3. Color Adjustment” (page 18)
Contrast
Temperature
Gamma
Advanced
Settings
Hue
Saturation
Contrast Enhancer
Outline Enhancer
Gain
6 Colors
Color Reset “3-9. Restoring the Default Setting”
(page 28)
Screen Screen Size “2-4. Displaying Lower Resolutions”
(page 24)
Analog
Adjustment
Auto Adjustment “2-2. Displaying Screen Correctly”
(page 14)
Range Adjustment
Clock
Phase
Hor.Position
Ver.Position
PowerManager Power Save “4-1. Setting the Power Saving” (page 29)
Auto EcoView “4-3. Setting Monitor’s Automatic Brightness
Adjustment” (page 30)
Power Indicator “4-2. Setting Power Indicator” (page 29)
Eco Timer “4-4. Setting the automatic power off
function” (page 30)
Menu Settings Language “3-5. Setting Language” (page 27)
Orientation “3-4. Setting Orientation” (page 26)
Menu Position “3-6. Setting the Display Position of the
Adjustment Menu” (page 27)
Tools Input Selection “6-2. Connecting More than Two PCs to the
Monitor” (page 35)
Auto Sharpness “3-8. Enable/Disable Auto Sharpness”
(page 28)
Mode Preset “3-1. Enabling/Disabling Mode Selection”
(page 25)
Signal Info “6-4. Displaying Monitor Information”
(page 38)
Monitor Info
All Reset “3-9. Restoring the Default Setting”
(page 28)
* The adjusting/setting function on the <Color> menu depend on the selected Color mode (page 19). The above table
shows the sub menus when the “User1-3” mode is selected (See “2-3. Color Adjustment” (page 18)).

12 Chapter 2 Adjusting Screen
Chapter 2 Adjusting Screen
2-1. Setting Screen Resolution
Compatible Resolutions/Frequencies
The monitor supports the following resolutions.
Analog Input
Resolution Applicable signal Frequency Dot Clock
640 × 480 VGA 60 Hz
170 MHz
(Max.)
720 × 400 VGA TEXT 70 Hz
800 × 600 VESA 60 Hz
1024 × 768 VESA 60 Hz
1280 × 960 VESA 60 Hz
1280 × 1024 VESA 60 Hz
1600 × 1200 VESA 60 Hz
1680 × 1050 VESA CVT 60 Hz
1920 × 1200*VESA CVT RB 60 Hz
Digital Input (DVI-I/DisplayPort)
Resolution Applicable signal Frequency Dot Clock
640 × 480 VGA 60 Hz
164.5 MHz
(Max.)
720 × 400 VGA TEXT 70 Hz
800 × 600 VESA 60 Hz
1024 × 768 VESA 60 Hz
1280 × 960 VESA 60 Hz
1280 × 1024 VESA 60 Hz
1600 × 1200 VESA 60 Hz
1680 × 1050 VESA CVT, VESA CVT RB 60 Hz
1920 × 1200* VESA CVT RB 60 Hz
A graphics board in conformance with VESA standard is required.
* Recommended resolution (Set this resolution)

13
Chapter 2 Adjusting Screen
Setting Resolution
When you connect the monitor to the PC and nd that the resolution is improper, or when you want to
change the resolution, follow the procedure below.
● Windows 7
1. Right-click the mouse anywhere on the desktop except for icons.
2. From the displayed menu, click “Screen resolution”.
3. On the "Screen Resolution" dialog, select the monitor .
4. Click "Resolution" to select the desired resolution.
5. Click the [OK] button.
6. When a conrmation dialog is displayed, click [Keep changes].
● Windows Vista
1. Right-click the mouse anywhere on the desktop except for icons.
2. From the displayed menu, click “Personalize”.
3. On the “Personalization” window, click “Display Settings”.
4. On the “Display Settings” dialog, select the “Monitor” tab and select desired resolution in the
“Resolution” eld.
5. Click the [OK] button.
6. When a conrmation dialog is displayed, click [Yes].
● Windows XP
1. Right-click the mouse anywhere on the desktop except for icons.
2. From the displayed menu, click “Properties”.
3. When the “Display Properties” dialog is displayed, click the “Settings” tab and select desired
resolution for “Screen resolution” under “Display”.
4. Click the [OK] button to close the dialog.
● Mac OS X
1. Select “System Preferences” from the Apple menu.
2. When the “System Preferences” dialog is displayed, click “Displays” for “Hardware”.
3. On the displayed dialog, select the “Display” tab and select desired resolution in the “Resolutions”
eld.
4. Your selection will be reected immediately. When you are satised with the selected resolution, close
the window.

14 Chapter 2 Adjusting Screen
2-2. Displaying Screen Correctly
Digital Input
When digital signals are input, images are displayed correctly based on the preset data of the monitor.
When performing advanced adjustment, see “2-3. Color Adjustment” (page 18) and subsequent pages.
Analog Input
Attention
• Wait 30 minutes or more from monitor power on before starting adjustments.
(Allow the monitor to warm up for at least 30 minutes before making adjustments.)
The monitor screen adjustment is used to suppress ickering of the screen or adjust screen position and
screen size correctly according to the PC to be used.
The Self Adjust function works when all of the following conditions are satised.
• When a signal is input into the monitor for the rst time or when the resolution or Vertical/
Horizontal Frequency not displayed before is set
• When signals with the vertical resolution over 480 are input
If the screen is not displayed correctly even after performing the Self Adjust operation, adjust the screen
according to the procedures on the following pages to use the monitor comfortably.
[Adjustment Procedure]
1 Perform the auto adjustment.
● To adjust ickering, screen position, and screen size automatically [Auto Adjustment]
Procedure
1. Choose <Screen> from the Adjustment menu, and press .
2. Choose <Analog Adjustment> from the <Screen> menu, and press .
3. Choose <Auto Adjustment>, and press .
The auto adjustment function works (the message “In Progress” appears) to correctly adjust the ickering, screen
position, and screen size correctly.
When the auto adjustment is completed, a message appears. Select “OK” to conrm the new settings or “Cancel”
to restore the previous settings, and press .
Attention
• This function works correctly when an image is fully displayed over the Windows or Macintosh display area. It
does not work properly when an image is displayed only on a part of the screen (command prompt window, for
example) or when a black background (wallpaper, etc.) is in use.
• This function does not work correctly with some graphics boards.
If the screen is not displayed correctly even after adjusting in step 1 above, perform the adjustments
according to the procedures on the following pages. When the screen is displayed correctly, go to step
5 “To adjust color gradation automatically [Range Adjustment]”.

15
Chapter 2 Adjusting Screen
2 Prepare the display pattern for the analog display adjustment.
Load the “EIZO LCD Utility Disk” to your PC, and then open the “Screen adjustment pattern les”.
NOTE
• For details and instructions on opening the “Screen adjustment pattern les”, refer to the “Readme.txt” le.
3 Perform the auto adjustment again with the analog screen adjustment pattern
displayed.
● To adjust ickering, screen position, and screen size automatically [Auto Adjustment]
Procedure
1. Display Pattern 1 of the “Screen adjustment pattern les” in full screen on the monitor.
2. Choose <Screen> from the Adjustment menu, and press .
3. Choose <Analog Adjustment> from the <Screen> menu, and press .
To proceed with the subsequent adjustments, select an item in <Analog Adjustment> of the <Screen> menu.
4. Choose <Auto Adjustment>, and press .
The auto adjustment function works (the message “In Progress” appears) to adjust the ickering, screen position,
and screen size correctly.
When the auto adjustment is completed, a message appears. Select “OK” to conrm the new settings or “Cancel”
to restore the previous settings, and press .
If the screen is not displayed correctly even after adjusting in step 3 above, perform the adjustments
according to the procedures on the following pages. When the screen is displayed correctly, go to step
5 “To adjust color gradation automatically [Range Adjustment]”.

16 Chapter 2 Adjusting Screen
4 Perform advanced adjustments for the following using the <Screen> menu of
the <Analog Adjustment>.
Adjust the clock, phase and position, in this order.
● To eliminate vertical bars [Clock]
Procedure
1. Choose <Clock> from the <Analog Adjustment> menu, and press .
2. Adjust the clock with or .
Press slowly so as not to miss the adjustment point.
3. Press to exit the adjustment.
When blurring, ickering or bars appear on the screen after adjustment, proceed to [Phase] to remove ickering
or blurring.
● Remove ickering or blurring [Phase]
Procedure
1. Choose <Phase> from the <Analog Adjustment> menu, and press .
2. Adjust the phase with or .
3. Press to exit the adjustment.
Attention
• Flickering or blurring may not be eliminated depending on your PC or graphics board.
● To correct screen position [Hor.Position] [Ver.Position]
NOTE
• Since the number of pixels and the pixel positions are xed on the LCD monitor, only one position is provided to
display images correctly. The position adjustment is made to shift an image to the correct position.
Procedure
1. Choose <Hor.Position> or <Ver.Position> from the <Analog Adjustment> menu, and press .
2. Adjust the position with or .
3. Press to exit the adjustment.
When vertical bars appear on the screen after adjustment, go back to “To eliminate vertical bars [Clock]”.
(Clock → Phase → Position)

17
Chapter 2 Adjusting Screen
5 Adjust the color gradation.
● To adjust color gradation automatically [Range Adjustment]
Every color gradation (0 to 255) can be displayed by adjusting the signal output level.
Procedure
1. Display Pattern 2 in full screen on the monitor using the “Screen adjustment pattern les”.
2. Choose <Range Adjustment> from the <Analog Adjustment> menu, and press .
The color gradation is adjusted automatically.
When the auto adjustment is completed, a message appears. Select “OK” to conrm the new settings or “Cancel”
to restore the precious settings, and press .
3. Close the Pattern 2.

18 Chapter 2 Adjusting Screen
2-3. Color Adjustment
● To select the display mode (FineContrast)
FineContrast allows you to select easily the adequate mode suitable for the monitor’s application.
FineContrast mode
Mode Purpose
1-User1 Available for the color settings according to your preference.
2-User2
3-User3
4-Text Suitable for displaying texts for word processing or spreadsheets.
5-Picture Suitable for displaying images such as photos or picture images.
6-Movie Suitable for playing back animated images.
7-sRGB Suitable for color matching with sRGB compatible peripherals.
The mode menu
appears.
Procedure
1. Press .
Mode menu appears at the lower left of the screen.
2. The mode among the list is highlighted in turn each time is pressed.
You can switch the current mode with or while the mode menu is being displayed.
→1-User1←→2-User2←→3-User3←→4-Text←→5-Picture←→6-Movie←→7-sRGB←
NOTE
• The Adjustment menu and the Mode menu cannot be displayed at the same time.
• You can disable a specic mode to be selected. For more information, refer to “3-1. Enabling/Disabling Mode
Selection” (page 25).
• “ScreenManager Pro for LCD” allows you to select the FineContrast mode automatically according to the
application used. (Refer to “Chapter 3 Auto FineContrast” on the User’s Manual for “ScreenManager Pro for
LCD”.)
● To perform advanced adjustments
The <Color> menu of the Adjustment menu allows you to set and save the independent color adjustment
for each mode.
Attention
• Wait 30 minutes or more from monitor power on before starting the color adjustment.
(Allow the monitor to warm up for at least 30 minutes before making adjustments.)
• Perform the range adjustment rst when adjusting color for analog input signals.
(Refer to “To adjust color gradation automatically” on page 17).
• The same image may be seen in different colors on multiple monitors due to their monitor-specic characteristics.
Make ne color adjustment visually when matching colors on multiple monitors.

19
Chapter 2 Adjusting Screen
NOTE
• The values shown in “%” or “K” are available only as reference.
• Using the “ScreenManager Pro for LCD” allows you to perform the color adjustment by using the mouse and
keyboard of your PC. The adjusted status can be registered as a color data and restore the data later. (Refer to
“Chapter 4 Color Adjustment” on the User’s Manual for “ScreenManager Pro for LCD”.)
● Adjustment items in each mode
According to the mode selected, the adjustable function differs.
(You can not select any function unavailable for adjustment or setting.)
The adjustments or settings made for each mode are applied to all input signals.
For the adjustment method of each function, refer to subsequent pages.
√: Adjustment available ―: Invalid for adjustment
Icon Function
FineContrast mode
1-User1
2-User2
3-User3
4-Text 5-Picture 6-Movie 7-sRGB
Brightness √√√√√
Contrast √√√√―
Temperature √√√√―
Gamma √ √ ― ― ―
Hue √√√√―
Saturation √√√√―
Contrast Enhancer √―√ √―
Outline Enhancer √√√√√
Gain √ ――――
6 Colors √ ――――
Color Reset √√√√√

20 Chapter 2 Adjusting Screen
● To adjust the brightness [Brightness]
The screen brightness is adjusted by changing the brightness of the backlight (Light source from the LCD
back panel).
Adjustable range: 0 to 100%
Procedure
1. Choose <Color> from the Adjustment menu, and press .
2. Choose <Brightness> from the <Color> menu, and press .
3. Adjust the brightness with or .
4. Press to exit the adjustment.
NOTE
• You can also adjust the brightness using and .
• When your feel the image is bright even if the brightness is set to 0%, adjust the contrast.
● To adjust the contrast [Contrast]
The luminance of the screen is adjusted by varying the video signal level.
Adjustable range: 0 to 100%
Procedure
1. Choose <Color> from the Adjustment menu, and press .
2. Choose <Contrast> from the <Color> menu, and press .
3. Adjust the contrast with or .
4. Press to exit the adjustment.
NOTE
• In the contrast of 100%, every color gradation is displayed.
• When adjusting the monitor, it is recommended to perform the brightness adjustment which may not lose the
gradation characteristics, prior to the contrast adjustment.
• Perform the contrast adjustment in the following cases.
- When you feel the image is bright even if the brightness is set to 0%. (Set the contrast to lower than 100%).
● To adjust the color temperature [Temperature]
The color temperature can be adjusted. The color temperature is normally used to express the hue of
“White” and/or “Black” by a numerical value. The value is expressed in degrees “K” (Kelvin). In the
same way as the ame temperature, the image on the monitor is displayed reddish if the color temperature
is low and is bluish if the color temperature is high. The gain preset values are set for each color
temperature setting value.
Adjustable range: Native, 4000K-10000K (specied by every 500K unit, including 9300K)
Procedure
1. Choose <Color> from the Adjustment menu, and press .
2. Choose <Temperature> from the <Color> menu, and press .
3. Adjust the color temperature with or .
4. Press to exit the adjustment.
NOTE
• [Gain] allows you to perform more advanced adjustment (See “To adjust the gain value” on page 22).
• If you set to [Native], the image is displayed in the preset color of the monitor (Gain: 100% for each RGB).
• When changing the gain value, the color temperature adjusting range is changed to “User”.