Eizo FLEXSCAN MX240W User manual

Important
Please read this User’s Manual carefully to
familiarize yourself with safe and effective
usage procedures.
Please retain this manual for future
reference.
About TCO'03 ................................................................37
FCC Declaration of Conformity......................................38
Hinweise zur Auswahl des richtigen
Schwenkarms für Ihren Monitor /
Hinweis zur Ergonomie..................................................39
SAFETY SYMBOLS ........................................................2
PRECAUTIONS .......................................................... 3
1. Introduction..................................................................7
1-1. Features .................................................................. 7
1-2. Buttons and Indicators ............................................ 8
1-3. Utility Disk ............................................................... 9
2. Installation.................................................................. 10
2-1. Connecting Two PCs to the Monitor ...................... 10
2-2. Making Use of USB (Universal Serial Bus)...............11
3. Screen Adjustment and Settings ............................... 12
3-1. Basic Operation and Functions ............................. 12
3-2. Screen Adjustment................................................ 14
3-3. Color Adjustment................................................... 17
3-4. Power-save Setup ................................................. 20
3-5. Off Timer ............................................................... 21
3-6. Locking the settings............................................... 21
3-7. Power Indicator Setting ......................................... 22
3-8. Automatic brightness adjustment .......................... 22
3-9. Displaying Lower Resolutions ............................... 23
3-10. Setting the orientation of the Adjustment menu......... 24
3-11. EIZO Logo Appearing Function........................... 24
4.Troubleshooting ..........................................................25
5. Reference ..................................................................28
5-1. Attaching an arm ................................................... 28
5-2. Cleaning ................................................................ 29
5-3. Specifications ........................................................ 30
5-4. Glossary................................................................ 33
6. APPENDIX/ANHANG/ANNEXE ................................ 35

2
SAFETY SYMBOLS
SAFETY SYMBOLS
This manual uses the safety symbols below. They denote critical information. Please read them carefully.
WARNING
Failure to abide by the information in a WARNING may result in serious injury and can
be life threatening.
CAUTION
Failure to abide by the information in a CAUTION may result in moderate injury and/or
propertyor product damage.
Indicates a prohibited action.
Indicates to ground for safety.
Copyright© 2007 EIZO NANAO CORPORATION All rights reserved. No part of this manual may be
reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic,
mechanical, or otherwise, without the prior written permission of EIZO NANAO CORPORATION.
EIZO NANAO CORPORATION is under no obligation to hold any submitted material or information
confidential unless prior arrangements are made pursuant to EIZO NANAO CORPORATION's receipt
of said information. Although every effort has been made to ensure that this manual provides up-to-date
information, please note that EIZO monitor specifications are subject to change without notice.
ENERGY STAR is a U.S. registered mark.
Macintosh is registered trademark of Apple Inc.
VGA is a registered trademark of International Business Machines Corporation.
DPMS is a trademark and VESA is a registered trademark of Video Electronics Standards Association.
Windows is a registered trademark of Microsoft Corporation.
PowerManager and RadiCS are trademarks of EIZO NANAO CORPORATION.
ScreenManager, FlexScan and EIZO are registered trademarks of EIZO NANAO CORPORATION
As an ENERGY STAR®Partner, EIZO NANAO CORPORATION has determined that this product
meets the ENERGY STAR guidelines for energy efficiency.
Product specifications may vary depending on the region. Confirm the specifications in the manual written
in the language of the region of purchase.

PRECAUTIONS
3
PRECAUTIONS
IMPORTANT!
• This product has been adjusted specifically for use in the region to which it was originally shipped.
If operated outside the region to which it was originally shipped, the product may not perform as
stated in the specifications.
This product is designed for use in Japan only and cannot be used in any other countries.
• To ensure personal safety and proper maintenance, please read this section and the caution statements
on the unit (refer to the figure below).
[Location of the Caution Statements]
WARNING
If the unit begins to emit smoke, smells like something is burning, or makes
strange noises, disconnect all power connections immediately and contact
your dealer for advice.
Attempting to use a malfunctioning unit may result in fire, electric shock, or
equipment damage.
Do not open the cabinet or modify the unit.
Opening the cabinet or modifying the unit may result in fire, electric shock, or burn.
Refer all servicing to qualified service personnel.
Do not attempt to service this product yourself as opening or removing covers may
result in fire, electric shock, or equipment damage.
Keep small objects or liquids away from the unit.
Small objects accidentally falling through the ventilation slots into the cabinet or
spillage into the cabinet may result in fire, electric shock, or equipment damage. If an
object or liquid falls/spills into the cabinet, unplug the unit immediately. Have the unit
checked by a qualified service engineer before using it again.

4
PRECAUTIONS
WARNING
Place the unit at the strong and stable place.
A unit placed on an inadequate surface may fall and result in injury or equipment
damage.
If the unit falls, disconnect the power immediately and ask your dealer for advice.
Do not continue using a damaged unit. Using a damaged unit may result in fire or
electric shock.
Set the unit in an appropriate location.
Not doing so may result in fire, electric shock, or equipment damage.
• Do not place outdoors.
• Do not place in the transportation system (ship, aircraft, trains, automobiles,
etc.)
• Do not place in a dusty or humid environment.
• Do not place in a location where the steam comes directly on the screen.
• Do not place near heat generating devices or a humidifier.
To avoid danger of suffocation, keep the plastic packing bags away from
babies and children.
Use the enclosed power cord and connect to the standard power outlet of your
country.
Be sure to remain within the rated voltage of the power cord.Not doing so may result
in fire or electric shock.
Power supply: 100-120/200-240 Vac, 50/60 Hz
To disconnect the power cord, grasp the plug firmly and pull.
Tugging on the cord may damage and result in fire or electric shock.
OK
The equipment must be connected to a grounded main outlet.
Not doing so may cause in fire or electric shock.
Use the correct voltage.
• The unit is designed for use with a specific voltage only. Connection to another
voltage than specified in this User's Manual may cause fire, electric shock, or
equipment damage.
Power supply: 100-120/200-240 Vac, 50/60 Hz
• Do not overload your power circuit, as this may result in fire or electric shock.
Handle the power cord with care.
• Do not place the cord underneath the unit or other heavy objects.
• Do not pull on or tie the cord.
If the power cord becomes damaged, stop using it. Use of a damaged cord may
result in fire or electric shock.
Never touch the plug and power cord if it begins to thunder.
Touching them may result in electric shock.

PRECAUTIONS
5
WARNING
When attaching an arm stand, please refer to the user's manual of the arm
stand and install the unit securely.
Not doing so may cause the unit to come unattached, which may result in injury or
equipment damage. When the unit is dropped, please ask your dealer for advice.
Do not continue using a damaged unit. Using a damaged unit may result in fire or
electric shock. When reattaching the tilt stand, please use the same screws and
tighten them securely.
Do not touch a damaged LCD panel directly with bare hands.
The liquid crystal which leaks from the panel is poisonous if it enters the eyes or
mouth.
If any part of the skin or body comes in direct contact with the panel, please wash
thoroughly. If some physical symptoms result, please consult your doctor.
Lamps contain mercury, dispose according to local, state or federal laws.
CAUTION
Handle with care when carrying the unit.
Disconnect the power cord and cables when moving the unit. Moving the unit with
the cord attached is dangerous. It may result in injury.
When handling the unit, grip the bottom of the unit firmly with both hands
ensuring the panel faces outward before lifting.
Dropping the unit may result in injury or equipment damage.
Do not block the ventilation slots on the cabinet.
• Do not place any objects on the ventilation slots.
• Do not install the unit in a closed space.
• Do not use the unit laid down or upside down.
Blocking the ventilation slots prevents proper airflow and may result in fire, electric
shock, or equipment damage.
Do not touch the plug with wet hands.
Doing so may result in electrical shock.
Use an easily accessible power outlet.
This will ensure that you can disconnect the power quickly in case of a problem.
Periodically clean the area around the plug.
Dust, water, or oil on the plug may result in fire.
Unplug the unit before cleaning it.
Cleaning the unit while it is plugged into a power outlet may result in electric shock.
If you plan to leave the unit unused for an extended period, disconnect the
power cord from the wall socket after turning off the power switch for the
safety and the power conservation.

6
PRECAUTIONS
LCD Panel
In order to suppress the luminosity change by long-term use and to maintain the stable luminosity, use of a
monitor in lower brightness is recommended.
The LCD panel is manufactured using high-precision technology. However, note that the appearance of any
missing pixels or lit pixels does not indicate damage to the LCD monitor.
Percentage of effective pixels : 99.9994% or higher.
The backlight of the LCD panel has a fixed life span. When the screen becomes dark or begins to flicker,
please contact your dealer.
Do not press on the panel or edge of the frame strongly, as this may result in damage to the screen. There
will be prints left on the screen if the pressed image is dark or black. If pressure is repeatedly applied to the
screen, it may deteriorate or damage your LCD panel. Leave the screen white or black to decrease the prints.
When the screen image is changed after displaying the same image for extended periods of time, an
afterimage may appear. Use the screen saver or timer to avoid displaying the same image for extended
periods of time.
When the monitor is cold and brought into a room or the room temperature goes up quickly, dew
condensation may occur inside and outside the monitor. In that case, do not turn the monitor on and wait until
dew condensation disappears, otherwise it may cause some damages to it.
Do not scratch or press on the panel with any sharp objects, such as a pencil or pen as this may result in
damage to the panel. Do not attempt to brush with tissues as this may scratch the LCD panel.
To use the monitor comfortably
An excessively dark or bright screen may affect your eyes. Adjust the brightness of the monitor according to
the environmental conditions.
Staring at the monitor for a long time tires your eyes. Take a 10-minute rest every hour.

1. Introduction
7
1. Introduction
Thank you very much for choosing an EIZO Color Monitor.
1-1. Features
•24" wide format LCD
•Applicable to HDCP
•Dual inputs compliant (DVI-I x 2)
•DVI Digital input (TMDS ) compliant
•[Horizontal scanning frequency]
Analog: 24 - 94 kHz
Digital: 31 - 76 kHz
[Vertical scanning frequency]
Analog: 49 - 86 Hz (1600 x 1200: 49 - 76 Hz / 1920 x 1200: 49 - 61 Hz)
Digital: 59 - 61 Hz (VGA text: 69 - 71 Hz)
[Resolution] 1920 dots x 1200 lines
•Frame Synchronous mode supported (59 - 61 Hz)
•DICOM mode (CAL Switch function)
•CAL Switch function for selecting an optimal calibration mode
•The Portrait/Landscape display capability
•The quality control software "RadiCS LE" (for Windows) used to calibrate the monitor is
included(refer to the EIZO LCD Utility Disk).
•The utility software "ScreenManager Pro for Medical" (for Windows) to control the monitor from
a PC with mouse/keyboard is included (refer to the EIZO LCD Utility Disk).
•Smoothing function incorporated for the adjustment of an enlarged image
•Height adjustable stand
•BrightRegulator function incorporate


8
1. Introduction
1-2. Buttons and Indicators
124 5 6 7 83 9
1. Sensor (BrightRegulator)
2. Adjustment Lock button
3. Input Signal Selection button
4. Mode button
5. Auto Adjustment button
6. Enter button
7. Control buttons (Left, Down, Up, Right)
8. Power button
9. Power indicator
Indicator status Operation status
Blue The screen is displayed
Orange Power saving
Off Power off
*ScreenManager®is an EIZO's nickname of the Adjustment menu.
Buttons
Adjustment menu
(ScreenManager®*)

1. Introduction
9
1-3. Utility Disk
An "EIZO LCD Utility Disk" (CD-ROM) is supplied with the monitor. The following table shows the
disk contents and the overview of the application software programs.
Disk contents and software overview
The disk includes a monitor information file, application software programs for adjustment, and User’s
Manual. Refer to "Readme.txt” or the "Readme" file on the disk for software startup procedures or file
access procedures.
Item Overview For Windows For Macintosh
A “Readme.txt” or “Readme” file √ √
Color Profiles
(ICC Profiles)
Color profiles - √
Screen Adjustment
Program
Available for easy adjustments of the monitor screen
following adjustment patterns and procedures on the
screen.
√ √
RadiCS LE RadiCS LE is quality control software used to calibrate
the monitor and manage the calibration history.
(A PC must be connected to the monitor with the
supplied USB cable.) Refer to the description later.
√ -
ScreenManager
Pro for Medical
A utility software program to control monitor adjustments
from a PC using its mouse and keyboard.
(A PC must be connected to the monitor with the
supplied USB cable.) Refer to the description later.
√ -
User’s Manual (PDF file) √ √
To RadiCS LE or ScreenManager Pro for Medical
Refer to the corresponding User's Manual on the CD-ROM disk in order to install and use the software.
When using this software, you will need to connect a PC to the monitor with the supplied USB cable.
For more information refer to the "2-2. Making Use of USB (Universal Serial Bus)" (page 11).

10
2. Installation
2. Installation
2-1. Connecting Two PCs to the Monitor
Two PCs can be connected to the monitor through the DVI-I connector on the back of the monitor.
Connection examples
PC 1 PC 2
(Ex.1) Digital DVI
Signal Cable
(FD-C39 enclosed)
Signal Cable
(FD-C16 enclosed) D-Sub
mini 15
pin
Analog
(Ex.2) Analog
D-Sub
mini 15
pin
Signal Cable
(FD-C16 enclosed)
Signal Cable
(FD-C16 optional) D-Sub
mini 15
pin
Analog
Selecting input signal
Switch the input signal with . Input signal switches each time is pressed. When the signal is
switched, the active signal type (Signal 1 or 2/ Analog or Digital) appears at the top right corner of the
screen for two seconds.
To set auto-switching of input signals [Input Signal]
The monitor recognizes the connector through which PC signals are input.
When either PC is turned off or enters the power-saving mode, the monitor automatically displays signals
of another PC.
Prioritysetting Function
Auto When either PC is turned off or enters the power-saving mode, the monitor
automatically displays signals of another PC.
Manual The monitor does not detect the PC’s signals automatically. Select an active input
signal with .
[Input signal setting]
1. Choose <Others> from the Adjustment menu, and press .
2. Choose <Input Signal> from the <Others> menu, and press .
The <Input Signal> menu appears.
3. Select "Auto" or "Manual" with or , and press .
The Input Priority setting is completed.
SIGNAL1 SIGNAL2
Input Signal Selection button

2. Installation
11
2-2. Making Use of USB (Universal Serial Bus)
This monitor provides a hub which supports the USB standard. When connecting to a USB compliant PC
or another hub, the monitor functions as a hub to which the USB compliant peripherals can be easily
connected.
Required system environment
•PC equipped with USB ports or another USB hub connected to the USB compliant PC
•Windows 2000/XP/Vista // Mac OS 9.2.2 or later
•USB Cable (MD-C93, enclosed)
NOTE
•The USB hub function may not work properly depending on the PC or peripherals. Please consult the
manufacturer of each device about the USB support.
•Using the USB Rev. 2.0 compatible PC or peripherals is recommended.
•If the monitor is in the power saving mode, or if the monitor is connected to the power outlet with the
monitor turned off, all the devices connected to the USB ports (upstream and downstream) work.
Therefore, power consumption of the monitor varies with connected devices even in the power saving
mode.
•The followings are procedures for the Windows2000/XP/Vista and Mac OS.
Connecting to the USB HUB
1
Connect the monitor to the PC with the signal cable first, then turn on the PC.
2
Connect the upstream port of the monitor to the downstream port of the
USBcompliant PC or another hub by using the USB cable.
After connecting the USB cable, the USB function can be set up automatically.
3
After setting up, the monitor's USB hub is available for connecting USB
compliantperipherals to the downstream ports of the monitor.
Downstream
Upstream

12
3. Screen Adjustment and Settings
3. Screen Adjustment and Settings
3-1. Basic Operation and Functions
Adjustment menu allows you to adjust screen performance though the main menu and select a CAL
Switch mode easily.
NOTE
•The Adjustment menu and the CAL Switch mode name cannot be displayed at the same time.
1
Entering the Adjustment menu
Press once to display the main menu of the Adjustment menu.
2
Making Adjustments and Settings
1. Select the desired sub menu icon using and press . The sub menu appears.
2. Use to select the desired setting icon and press . The setting menu appears.
3. Use to make all required adjustments and press save the settings.
3
Exiting the Adjustment menu.
1. To return to the main menu, select the <Return> icon or press twice, followed by .
2. To exit the Adjustment menu, select <Exit> icon or press twice, followed by .
Tips
•Double clicking at any time also exits the Adjustment menu.
Adjustment menu (ScreenManagaer®)
Mode button Control buttons
(Left, Down, Up, Right)
Power button
Enter button
CAL Switch Menu

3. Screen Adjustment and Settings
13
Functions
The following table shows all the Adjustmet menu's adjustment and setting menus. "*" indicates
adjustments of analog input only and "**" indicates digital input only.
Main menu Sub menu Reference
Screen Clock *3-2. Screen Adjustment
Phase *
Position *
Resolution *
Range Adjustment *
Smoothing
Signal Filter *
Color(Custom)*1Brightness 3-3. Color Adjustment
Temperature
Gamma
Saturation
Hue
Gain
6 Colors
Reset
PowerManager DVI DMPM ** 3-4. Power-save Setup
VESA DPMS *
OFF
Others Screen Size 3-9. Displaying Lower Resolutions
Border Intensity
Input Signal Set the input signal selection of automatic or
manual.
Off Timer Set the monitor's Off Timer to on or off.
Menu Settings Menu Size Change the size of the menu.
Menu Position Adjust the menu position.
Menu Off Timer Set the menu displaying time.
Translucent Set the transparency of the background.
Orientation Set the orientation of the Adjustment menu.
BrightRegulator Set automatic brightness adjustment.
Power Indicator Make non-light for blue lighting when the screen
is displayed. ( Power Indicator Setting. )
Reset Return to the factory Default settings.
Information Information Review the Adjustment menu's settings, model
name, serial number and usage time.*2
Language English, German, French,
Spanish, Italian, Swedish,
Chinese(Simplified),
Chinese(Traditional) and
Japanese
Select the Adjustment menu's language.
*1The adjustable functions on the <Color> menu depend on the selected CAL Switch mode. The above table shows the sub
menus when the "Custom" mode is selected (See " 3-3. Color Adjustment ").
*2Due to the inspection on the factory, the usage time may not "0 hour" at shipping.

14
3. Screen Adjustment and Settings
3-2. Screen Adjustment
NOTE
•Allow the LCD monitor to stabilize for at least 30 minutes before making image adjustments.
The monitor displays the digital input image correctly based on its pre-setting data.
Analog Input
Screen adjustments for the LCD monitor should be used in suppressing screen flickering and also for
adjusting the screen to its proper position. There is only one correct position for each display mode. It is
also recommended to use the Adjustment menu function when first installing the display or whenever
changing the system. For convenience, an easy set-up Program installed on the utility disk to assist in the
set-up procedure is provided.
Adjustment Procedure
1
Press on the control panel.
The message "Your setting will be lost if you press again now." appears and remains on the screen
for 5 seconds. While the message is on the screen, press the Auto Adjustment button again to
automatically adjust the clock, phase, screen position and resolution. If you do not wish to do
adjust the screen, do not press again.
NOTE
•The Auto adjustment function is intended for use on the Macintosh and on AT-compatible PC
running Windows. It may not work properly in either of the following cases. When running an
AT-compatible PC on MS-DOS (Not windows). The background color for the "wall paper" or
"desktop" pattern is set to black.
•It cannot work correctly using with some graphics cards.
If the appropriate screen cannot be made by using , adjust the screen through the following procedures.
If the appropriate screen can be made, proceed to 4. Range Adjustment .
2
Run the "Screen Adjustment Program".
Having read the "Readme.txt" file, run the "Screen Adjustment Program" in the enclosed EIZO
LCD Utility Disk. Step by step, adjustment is provided by the wizard guide. (If using the Windows,
the program can be directly run from the menu screen of the CD-ROM.)
Tips
•If the user's operating system has no utility disk (e.g. OS/2), we recommend setting the desktop
pattern to that as shown in the diagram on the following.

3. Screen Adjustment and Settings
15
3
Adjust by using <Screen> menu in the Adjustment menu.
(1)Vertical bars appear on the screen
Use the <Clock> adjustment.
Select the <Clock> and eliminate the vertical bars by using and of the Control buttons.
Do not continuously press the Control buttons, as the adjustment value will change quickly and
make it difficult to locate the most suitable adjustment point. If the horizontal flickering, blur
or bars appear, proceed to <Phase> adjustment as follows.
(2)Horizontal flickering, blurring or bars appear on the screen.
Use the <Phase> adjustment.
Select the <Phase> and eliminate the horizontal flickering, blurring or bars by using and
buttons.
NOTE
•Horizontal bars may not completely disappear from the screen depending on the PC.
(3)The screen position is incorrect.
Use the <Position> adjustment.
The correct displayed position of the monitor is decided because the number and the position of
the pixels are fixed. The <Position> adjustment moves the image to the correct position.
Select <Position> and adjust the position by using , , and . If vertical bars of distortion
appear after finishing the <Position> adjustment, return to <Clock> adjustment and repeat the
previously explained adjustment procedure. ("Clock" => "Phase" => "Position")

16
3. Screen Adjustment and Settings
(4)Screen image is smaller or larger than the actual screen images.
Use the <Resolution> adjustment.
Adjustment is needed when the input signal resolution and the resolution now being displayed
are different.
Select <Resolution> and confirm if the resolution now being displayed is the same as the input
resolution. If it is not, adjust the vertical resolution using and and adjust the horizontal
resolution using and .
4
Adjust the output signal range (Dynamic Range) of the signal.
Use the <Range Adjustment> of <Screen> menu.
This controls the level of output signal range to display the whole color gradation (256 colors).
[Procedure]
Select the <Range Adjustment> in the Adjustment menu. While the message is on the screen, press
on the control panel to adjust the Range Adjustment.
The screen blanks for a moment and adjusts the color range to display the whole color gradation
of the current output signal.
Smaller than the actual screen images.
Larger than the actual screen images.

3. Screen Adjustment and Settings
17
3-3. Color Adjustment
Simple adjustment [CAL Switch mode]
This function allows you to select the best display mode for monitor brightness, etc.
To select CAL Switch mode
Directly pressing allows you to select the best suited mode for screen display from 4 CAL Switch
modes; DICOM-CL, Text, Custom and CAL. Color settings each mode can be adjusted by using the
<Color> menu of the Adjustment menu.
Tips
•The Adjustment menu and the CAL Switch mode name cannot be displayed at the same time.
Exit
Press to exit the menu.
CAL Switch Mode
Selectable CAL Switch modes are as follows.
Mode Purpose
DICOM-CL Available for setting tailored to X-ray lm color (clear base).
Text Suitable for displaying texts for word processing or spreadsheets.
Custom Available for making desired setting.
CAL Used for monitor calibration
Color Adjustment of the Mode Settings
<Brightness>, <Temperature> and <Gamma> settings can be adjusted on the CAL Switch menu. Select
the desired function icon with and adjust with Control buttons. (Setting(s) of <Temperature>
and/or <Gamma> is defined as standard default in some modes.
NOTE
•"CAL" mode can be adjusted only by Calibration Software.
->DICOM-CL -> Text -> Custom -> CAL
Current Mode
Mode button Power button
CAL SwitchMenu
Control buttons
[EX.]Custom
Settings status
of Brightness,
Temperature and
Gamma
Enter button

18
3. Screen Adjustment and Settings
Advanced Adjustments[Adjustment menu]
Color settings of each CAL Switch mode can be adjusted and saved by using the <Color> menu of the
Adjustment menu.
In the analog input, perform the "Range Adjustment" before making the color adjustments. Never change the
CAL Switch mode during color adjustment. Select the mode in advance by using
Adjustment Items
The adjustable items and displayed icons on the <Color> menu depend on the selected CAL Switch
mode.
" √": Settable/Adjustable " -": Fixed at the factory
Icons Functions CAL Switch Mode
DICOM-CL sRGB Cutom CAL
Brightness*-√ √ -
Temperature*-√ √ -
Gamma*-√ √ -
Saturation -√ √ -
Hue -√ √ -
Gain - - √ -
6 colors - - √ -
Reset -√ √ -
*These settings can be also adjusted on the CAL Switch menu. (See CAL Switch.)
NOTE
•Allow the LCD monitor to stabilize for at least 30 minutes before making image adjustments. (Allowthe
monitor to warm up for at least 30 minutes before making adjustments.)
•The values shown in percentages represent the current level within the specific adjustment. They
areavailable only as a reference tool. (To create a uniform white or black screen, the percentages for
eachwill probably not be the same.)

3. Screen Adjustment and Settings
19
Adjustment Contents
Menu Function Descriptions Adjustable range
Brightness To set the brightness of the screen 0~100%
Tips
• The values shown in the “%” are available only as reference.
Temperature To set the color temperature 6500K~15000K
in 500 K increments (including 9300 K)
Tips
• The values shown in the Kelvin are available only as a reference tool.
• While color temperature is adjusted, <Gain> is adjusted automatically according to the
color temperature.
• Setting the temperature under 6500 K or over 15000 K invalidates the color
temperature setting. (The color temperature's setting turns "OFF".)
• Setting the <Gain> invalidates the <Temperature> adjustment.
Gamma To set the gamma value 1.8~2.6
Saturation To change the saturation -100~100
Setting the minimum level (-100) turns the
image to the monochrome.
NOTE
• The <Saturation> adjustment may cause undisplayable color tone.
Hue To change the flesh color, etc. -100~100
NOTE
• Using <Hue> adjustment may not obtain proper tone reproduction.
Gain To change each color
(red, green and blue)
0~100%
By adjusting the red, green and blue color
tones for each mode, custom colors can be
defined. Display a white or gray background
image and adjust the <Gain>.
Tips
• The values shown in the “%” are available only as reference.
• The <Temperature> setting invalidates this setting. The <Gain> setting varies with
color temperature.
6 colors To adjust <Saturation> and <Hue> in
each color (Red, Yellow, Green, Cyan,
Blue and Magenta)
Hue: -100 ~ 100
Saturation: -100 ~ 100
Reset To return the color settings to the
default settings
Select the <Reset>.

20
3. Screen Adjustment and Settings
3-4. Power-save Setup
The <PowerManager> menu in the Adjustment menu enables to set the power-save setup.
NOTE
•Do your part to conserve energy, turn off the monitor when you are finished using it. Disconnecting
the monitor from the power supply is recommended to save energy completely.
•Even if the monitor is in a power saving mode, USB compliant devices function when they are
connected to the monitor's USB (both the upstream and the downstream ports). Therefore, power
consumption of the monitor will change according to the connected devices even if the monitor is in a
power saving mode.
Analog Input
This monitor complies with the "VESA DPMS" standard and adopts a power saving method.
[Procedure]
1. Set the PC's power saving settings.
2. Select "VESA DPMS" from the <PowerManager> menu.
[Power Saving System]
PC Monitor Power Indicator
Operation Operation Blue
Power saving
STAND-BY
SUSPEND
OFF
Power saving Orange
[Power Resumption Procedure]
Operate the mouse or keyboard to return to a normal screen.
Digital Input
This monitor complies with the "DVI DMPM"
[Procedure]
1. Set the PC's power saving settings.
2. Select "DVI DMPM" from the <PowerManager> menu.
[Power Saving System]
The monitor enters the power saving mode in five seconds in connection with the PC setting.
PC Monitor Power Indicator
Operation Operation Blue
Power saving Power saving Orange
[Power Resumption Procedure]
Operate the mouse or keyboard to return to a normal screen.