EKOBUY ekb10155 User manual

ekb10155
Bluetooth 4.0 USB Dongle
© All rights reserved.
All trade names are registered trademarks of their respective manufacturers.
The Bluetooth name and the Bluetooth trademarks are owned by Bluetooth SIG Inc.
Before you proceed
NOTE : Remove any previously installed Bluetooth software and/or dongle on your computer.(Only if installed)
1. Windows
®
XP SP3: Click Start > ontrol Panel > Add or Remove Programs .
Windows
®
7: Click Start > ontrol Panel > Programs > Programs and Features > Uninstall a
program .
Windows
®
8/10: Click + I > ontrol Panel > Programs > Programs and Features > Uninstall a
program .
2. Remove any Bluetooth software on the list of applications.
Installing the Bluetooth driver (You don’t need to install driver for Windows 10)
1. Insert the Bluetooth 4.0 USB Dongle into any empty usb socket on your Desktop or Laptop PC.
2. Insert the support CD into the optical drive of your computer. If the CD does not run automatically browse the
contents of the support CD and double-click the Setup.exe file.
3. On the Bluetooth Software installation screen click Agree and Install Bluetooth Software .
4. Once the setup process is complete click Finish . Reboot the system to complete installation.
November 2016

Using the Bluetooth 4.0 USB Dongle
1. Insert the Bluetooth 4.0 USB Dongle into your computer’s USB port. (Make Sure Dongle attached before PC Starts)
2. To begin pairing Bluetooth devices do one of the following:
• Right-click on the Bluetooth icon on the System Tray and select Add a device .
• Windows
®
XP SP3: Click Start > ontrol Panel > Bluetooth Devices > Add
• Windows
®
7: Click Start > ontrol Panel > Hardware and Sound > Add a Bluetooth device
• Windows
®
8/10: 1. Click + I and then click hange P settings . Click Devices > Add a device
2. Click + W, type “bluetooth” in the search box and click Add Bluetooth device
If you have no access the driver D you can download drivers from
http://www.ekobuy.com/support